• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.159-170
• /
• 2007

This study evaluated the parameters of Clark unit hydrograph (UH) estimated using the rainfall-runoff measurements and evaluated their variability. This also includes the quantification of basin and meteorological factors using probability density functions, selection of storm events with mean affecting factors, and derivation of average parameters of the Clark UH from storm events selected. Summarizing the results from this procedure are as follows. (1) It is not easy to avoid much uncertainty on the decision of runoff characteristics (that is, the concentration time and storage coefficient) even with some rainfall-runoff events are available. (2) As the distribution function of concentration time is very skewed, a simple arithmetic mean may lead a biased estimate. That is, the arithmetic mean based on the normal distribution can not be representative anymore. The mode may well be the representative in this case. On the other hand, the storage coefficient shows a symmetric distribution function, so the arithmetic mean may be used use for its representative. For the basin in this study, the concentration time in this study is estimated to be about 7 hours, and the storage coefficient about 22 hours.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.1-10
• /
• 2009

Wooded areas that are a part of school campuses are one type of urban forest. Most schools located in an urban environment make an excellent setting for a forest in terms of location and area. These kinds of wooded spaces also make the city greener and healthier. As a place where students spend a great deal of time, schools can also be a venue for environmental education. The creation of wooded areas in schools currently has focused on the end result only; by ignoring student needs and participation, these areas have not had a significant influence on student environmental education. Previous studies based on questionnaire survey are significant in that they have quantified subjective qualitative data via Likert Scale. There has been, however, a problem in quantifying the more ambiguous subjective data. Therefore, this paper has attempted to investigate those factors that have an influence on student satisfaction with the wooded areas of their school campus using Fuzzy Theory with elementary school students in Gyeongsangbuk-do. A change was observed in terms of the ranking of arithmetic mean values of 'school peculiarity' and 'emotion evolution' and center of gravity, which has adopted Fuzzy Theory, proving that Fuzzy Theory could rationally objectify qualitative data such as human thoughts. In terms of the influential factors on the satisfaction with school forests(regression coefficient), 'school uniqueness(0.159)' was the highest, followed by 'many trees(0.142),' 'importance of nature(0.136)' and 'emotion evolution(0.130).' This paper may therefore be useful as basic data for objective questionnaire surveys and the development of school forests.

• Journal of Plant Biotechnology
• /
• v.43 no.4
• /
• pp.457-465
• /
• 2016

Microsatellites are one of the most suitable markers for identification of variety, as they have the capability to discriminate between narrow genetic variations. The polymorphism level between 120 microsatellite primer pairs and 148 soybean varieties was investigated through the fluorescence based automatic detection system. A set of 16 primer pairs showed highly reproducible polymorphism in these varieties. A total of 204 alleles were detected using the 16 microsatellite markers. The number of alleles per locus ranged from 6 to 28, with an average of 12.75 alleles per locus. The average polymorphism information content (PIC) was 0.86, ranging from 0.75 to 0.95. The unweighted pair group method using the arithmetic averages (UPGMA) cluster analysis for 148 varieties were divided into five distinctive groups, reflecting the varietal types and pedigree information. All the varieties were perfectly discriminated by marker genotypes. These markers may be useful to complement a morphological assessment of candidate varieties in the DUS (distinctness, uniformity and stability) test, intervening of seed disputes relating to variety authentication, and testing of genetic purity in soybean varieties.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.51-61
• /
• 2000

This paper discusses the homogenization method to determine effective average elastic constants of a linear structure by considering its microstructure. A detailed description on the homogenization method is given for the linear elastic material and then the finite element approximation is performed for an investigation of elastic properties. An asymptotic expansion is carried out in the cross-section area, or in the unit cell. Two and three lay-up structures made up of individual isotropic constituents are chosen for numerical examples to check discrepancies between results generated by this theoretical development and the conventional approach. Asymptotic characteristics of the process in extracting the stiffness of structure locally formed by spatial repetitions yield underestimated values of stiffness. These discrepancies are detected by the asymptotic corrective term which is ascribed to considerations of microscopic perturbations and proved in the finite element formulation. The asymptotic analysis is the more reasonable in analysing the composite material, rather than the conventional approach to calculate the macroscopic average for elastic properties.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.37-43
• /
• 2015

Purpose $^{99m}Tc-DMSA$ renal scintigraphy serves as location, size and shape of kidney, so it has been used for diagnosis and passage observation after the operation or treatment. There are 3 methods of calculating the relative renal uptake ratio such as geometric mean of the counts from the anterior and posterior views, arithmetical mean from the only posterior view and posterior view which applied the renal depths. In this study, we seek to correlation between the change of total relative uptake ratio according to different inspection methods of obtaining the renal count rate. Materials and Methods The phantom experiments proceeded 5 times depending on each renal depth with the kidney phantom and tissue equivalent materials. In the clinical research, we investigated 36 adult patients who had visited our hospital from february to october, 2014 and received $^{99m}Tc-DMSA$ renal scan. The equipment was used as a gamma camera named INFINIA (General Electric Healthcare, milwaukee, USA) and we drew the region of interests through semiautomatic method by using Xeleris Ver. 2.1220 of GE. In addition, we obtained the lateral view of kidney to measure the renal depth of each patient. Then the results were compared with 3 methods of calculating relative renal uptake ratio. Results The phantom studies show when the difference between the left ant right kidney depth were less than 1 cm, there were no statistically significant difference among values calculated through anterior and posterior views and only posterior view (P>0.05), while the excess of 1cm, the results showed a statistically significant change in the value (P<0.05). In case of clinical research, the correlation between total relative uptake ratio by obtaining both sides of image and posterior view applied the kidney depth (r=0.999) was higher than by obtaining only posterior view and applying the kidney depth to one side image (r=0.988). Conclusion This study has found that, the difference of calculating total relative uptake ratio compared with obtaining anterior and posterior views and only posterior view. In order to reduce the error, we recommend the method of obtaining anterior and posterior views and is considered to be useful, particularly the patients have similar uptake ratio of left and right kidney and difficulties of measurements of kidney depth.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.4
• /
• pp.218-234
• /
• 2004

Recent warm winters were evaluated for a possible shifting of the northern limit for winter barley cultivation in Korea. Therefore, safe zones for winter barley cultivation were reclassified based on the average and minimum January air temperature in recent years. The results are as follows: By analysis of mean values of January average air temperatures for 30 years (1971-2000), the northern limits for safe cultivation of hulled, naked, and malting barley were Ganghwa - Icheon - Chungju - Chunyang - Goseong, Cheonan - Geumsan - Mungyeong - Andong - Sokcho, and Gwangju - Jangheung - Sancheong - Pohang - Uljin lines, respectively. Meanwhile, based on the January average air temperature of 14 years (1987-2000) with warmer winters, the safe cultivation zone of winter barley shifted northward of the normal (1971-2000). So, the northern limits for hulled, naked, and malting barley were Pocheon - Chuncheon - Wonju - Yangpyeong - Chunyang, Ganghwa - Icheon - Chungju - Uiseong - Goseong, and Gunsan - Suncheon - Jinju - Miryang - Yeongdeok - Uljin lines, respectively. Winter barley cultivars with the strongest tolerance to low temperature can be grown up to the adjacent areas of Taebaek Mountains (that is, Inje, Hongcheon, Jecheon, and Taebaek areas). Based on January mean air temperatures of 10-year return period for 30 years (1971-2000), the northern limits for hulled and naked barley were Boryeong - Namwon - Geochang - Gumi - Goseong and Seocheon - Jeongeup - Hapcheon - Yeongdeok - Sokcho lines, respectively. It ~ppears that malting barley can be cultivated only at southern coastal areas (that is, Busan, Tongyeong, Yeosu, and Wando areas). On the other hand, based on the weather conditions of 14 years (1987-2000) with warmer winters, the northern limits for hulled, naked, and malting barley were Ganghwa - Icheon - Yeongju - Goseong, Seosan - Namwon - Mungyeong - Andong - Sokcho, and Gwangju - Jangheung - Sacheon - Ulsan - Uljin lines, respectively. The northern limit for winter barley cultivars including Olbori with the strongest tolerance to low temperature was the Ganghwa - Wonju - Chungju - Chunyang - Goseong line.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.721-727
• /
• 2013

The objective of this study was to evaluate the suitability of microsatellite markers for variety identification in 42 apple varieties. For microsatellite analysis, 305 primer pairs were screened in 8 varieties and twenty six primer pairs showed polymorphism with clear band pattern and repetitive reproducibility. A total of 165 polymorphic amplified fragments were obtained in 42 varieties using 26 markers. Two to twelve alleles were detected for each locus with an average of 6.4 alleles per locus. A value of polymorphism information content (PIC) ranged from 0.461 to 0.849 with an average of 0.665. A total of 165 marker loci were used to calculate Jaccard's distance coefficients using unweighted pair-group method with arithmetical average (UPGMA) cluster analysis. Genetic distance of cluster ranged from 0.27 to 1.00. Analysis of genetic relationship revealed that these 26 microsatellite marker sets discriminated a total of 41 varieties except for 1 variety among 42 varieties. These markers will be utilized as molecular data in variety identification of apple.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.71-78
• /
• 2016

This study aimed to evaluate the occurrence of natural radionuclides in Korean groundwater. Groundwater radionuclide data for the period 2000-2011 were obtained from the National Institute of Environmental Research and published literature, classified into five groups according to host rock type, and used to construct detailed concentration maps. Radon, uranium, gross-α, and radium concentrations ranged from 0.4 to 64,688.0 pCi/L (mean: 4,907 pCi/L), 0 to 2,297 μg/L (mean: 27.5 μg/L), 0 to 312 pCi/L (mean: 3.9 pCi/L), and 0 to 17.4 pCi/L (mean: 0.2 pCi/L), respectively. Radon concentrations in 562 of a total 1,501 wells (i.e., 53.5%) exceeded 4,000 pCi/L, which is the acceptable contamination threshold established by the United States Environmental Protection Agency. Uranium, gross-α, and radium concentrations exceeded the respective thresholds of 30 μg/L, 15 pCi/L, and 5 pCi/L in 121 of 1,031 wells (11.9%), 34 of 978 wells (3.5%), and 4 of 89 wells (4.5%), respectively. The mean radionuclide concentration in groundwaters hosted by igneous and metamorphic rocks was higher than that in groundwaters hosted by other rock types, such as volcanics, carbonates, and other sedimentary rocks. The correlations between individual radionuclides were weak or insignificant.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.245-256
• /
• 2000

A moment-curvature relationship to simulate the behavior of reinforced concrete beam under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the proposed model takes into consideration the bond-slip effect by using monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. The modification of the moment-curvature relation to reflect the fixed-end rotation and pinching effect is also introduced. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed model.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.18-24
• /
• 2012

Purpose : Although lung ventilation SPECT (LV-SPECT) has a good sensitivity in detection of deep lung lesions, it is difficult to apply the LV-SPECT to patients having breathing problems due to limited examination time. In this study, we evaluated the usefulness of LEAP collimator, which provides high detection sensitivity and tolerable resolution, for the LV-SPECT in terms of diagnostic accuracy and examination time. Materials and Methods : Four volunteers inhaled Technegas (370 MBq) and the lung ventilation planar scan (LVPS, 300 counts/view (cpv)) with LEHR collimator was performed using Siemens E.cam scanner as a reference test. LV-SPECT scans were performed with three collimators, LEHR, LEUHR, and LEAP, in low (7 kcpv) and high (70 kcpv) counting modes. The count ratios of left (LT) and right (RT) lung segments were calculated on the geometric mean view of anterior and posterior images for LVPS and on the summed coronal images of LV-SPECT, respectively. Comparing to LVPS, the usefulness of three different collimators for LV-SPECT was evaluated through statistical analysis (paired t-test), on count ratios of lung segments. Results : The average LT:RT ratio in LVPS was 47:53. For LV-SPECT, there were negligible difference of the LT:RT ratios (48:52 on average) among three different collimators in low and high counting modes. Comparing to standard LVPS with LEHR, all LV-SPECTs with different collimators resulted in similar diagnostic accuracy through paired t-test (p>0.05). The scan time in LVPS (6 views) was 17.3 min. For LV-SPECT (128 views) in low counting mode, it took 18.7 (LEUHR), 15.0 (LEHR), and 12.3 min (LEAP), respectively. Conclusion : Comparing to standard LVPS, the LV-SPECT with LEAP in low counting mode provided the comparable diagnostic accuracy in addition to shortened scan time.