• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.738-743
• /
• 1997

PVC핏치의 제조 조건에 따른 물성 변화 및 산화 안정화에 영향을 미치는 공정 변수를 연구하기 위하여 열중량 분석을 하였다. 산소 분위기를 사용하여 안정화온도, 승온속도 및 가스의 유량을 변화시켜 조사하였다. 안정화 온도가 높아짐에 따라 무게증가를 나타내는 시간구간이 짧아지고 결합되는 산소의 양은 감소하는 경향을 나타내며, 29$0^{\circ}C$정도로 안정화 온도가 높은 경우에는 결합되는 산소의양이 최대점에 도달한 후 다시 감소하는 경향을 나타냈다. 승온속도가 빨라짐에 따라 결합되는 산소의양은 감소하는 경향을 나타내었으나, 가스의 유량은 본 연구에서 설정한 범위 내에서는 영향이 관찰되지 않았다. 핏치 입자 직경이 커짐에 따라 최대 무게증가 값은 감소하고 최대 무게증가를 나타내는 온도는 증가함을 알았다. 그리고, 안정화에 의한 무게증가가 클수록 PVC핏치의 탄소수율은 감소하는 경향이 나타났다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.257-260
• /
• 2008

In order to control thrust of propulsion system, we built the 50 Newton level PE-GOx hybrid rocket, and changed the mass flow rate of GOx. From the preliminary experiential results, we could see possibility of controlling thrust of hybrid rockets by controlling mass flow rate of GOx.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.31-32
• /
• 2007

저온 공정이 가능한 대향타겟식 스퍼터 (Facing Target Sputtering, FTS) 를 이용하여 Flexible display에 적용 가능한 polymer 기판위에 산소 가스 유량비 변화에 따라 ITO를 합성하였다. 산소의 유량이 2.8 sccm 일 때 가시광 영역에서 85%이상의 투과도와 2.26 ${\sim}$ 10$^{-4}$ ${\Omega}$ cm의 가장 낮은 전기적 특성을 나타내었다.

• KSBB Journal
• /
• v.5 no.3
• /
• pp.269-277
• /
• 1990

Methylobacillus sp. SK1, an obligate methylotroph, was cultivated in a fed-batch culture using DO as a methanol feeding indicator with a micro computer-aided control system. While 2.07g/l of cell density was obtained after 13 hr in the batch culture (initial methanol concentration: 1.0%(v/v)),45.3g/l of cell density was obtained after 17 hr by feeding methanol and metal ions in the fed-batch culture with oxygen supply. The high-density biomass was obtained in short cultuivation time by fed-batch culture with feedback control, and consequently the biomass productivity was significantly increased. It was mainly due to extension of logarithmic growth period by methanol feeding without methanol inhibition and intensive aeration without DO limitation with microcomputer-aided control system.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.160-166
• /
• 2019

In this study, oxygen functional groups were introduced on activated carbon fibers (ACFs) by oxygen plasma treatment to improve the adsorption performance on an acetic acid which is a sick house syndrome induced gas. The active species was generated more as the flow rate of the oxygen gas increased during the plasma treatment. For this reason, the specific surface area (SSA) of the ACFs decreased with much more physical and chemical etching. In particular, the SSA of the sample (A-O60) injected with an oxygen gas flow rate of 60 sccm was reduced to about $1.198m^2/g$, which was about 6.95% lower than that of the untreated samples. On the other hand, the oxygen content introduced into the surface of ACFs increased up to 35.87%. Also, the adsorption performance on the acetic acid gas of the oxygen plasma-treated ACFs was improved by up to 43% compared to that of using the untreated ACFs. It is attributed to the formation of the hydrogen bonding due to the dipole moments between acetic acid molecules and oxygen functional groups such as O=C-O introduced by the oxygen plasma treatment.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.742-750
• /
• 1999

Nanosized TiO2 powders were synthesized using the chemical vapor conduensation (CVC) process with various precursor feeding rates (0.37 and 0.752 ml/min) and oxygen flow rates(1-2slm) conditions and powder characteristics were investigated in terms of formation of nanosized powder varying with the above processing conditions. For this study the main thermodynamic and fluid dynamic factors -supersaturation ratio collision frequency and residence time-were theoretically established and compared to the characteristics of formed TiO2 powder. The loosely combined anatase phase powders (including less than 3%of rutile phase) having 20-30nm crystallite size were obtained at overall conditions. The particle size and th degree of agglomeration for a precursor flow rate of 0.376 ml/min turn out to be smaller than for a flow rate of 0.742ml/min. And the decreasing of particles size and particle size distribution were observed with increasing oxygen flow rate as the residence time and collision frequency were reduced by increasing oxygen flow rate,. It appears that further scrutiny is needed to elucidate the influence of the individual thermodynamic and kinetic parameters mdependently.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2479-2483
• /
• 2012

This paper discusses the development of a personal compact oxygen generator for portable and mobility. The compact oxygen generator is operated with vacuum swing absorption by compact vacuum pump. The components of oxygen generator is composed on the miniaturization and weight reduction, and it is optimized by discharge pump speed, nozzle diameter and 3-way valve interval. In 0.5mm of nozzle diameter, $O_2$ concentration is approximately 37%, and flow rate is $1{\ell}$/min. On the 30cm away from the nozzle, $O_2$ concentration is increased approximately 0.5%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.877-880
• /
• 2011

A coaxial swirl/shear injector using GCH4/LOx as propellants was degisned and manufactured. Flow analysis by Fluent was performed to decide the number of orifice and the rear shapes of inlet orifice etc. Flow rate of the injector was measured according to differential pressure and uniformity of injector's spray pattern was confirmed by a patternator. The results showed that the difference of flow rate was around 10% and the spray angle of oxidizer was $66^{\circ}$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.658-661
• /
• 2011

A coaxial swirl/shear injector using GCH4/LOx as propellants was degisned and manufactured. Flow analysis by Fluent was performed to decide the number of orifice and the rear shapes of inlet orifice etc. Flow rate of the injector was measured according to differential pressure and uniformity of injector's spray pattern was confirmed by a patternator. The results showed that the difference of flow rate was around 10% and the spray angle of oxidizer was $66^{\circ}$.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.719-725
• /
• 2019

In this study, activated carbon fibers were treated with oxygen plasma to investigate gas sensing properties of the dimethyl methylphosphonate (DMMP), which is a simulant gas of the chemical warfare agent, according to oxygen functional group contents. As the flow rate of oxygen plasma treatment increased, oxygen groups were introduced to the surface of activated carbon fibers from 6.90 up to 36.6%, increasing the -OH group which influences the DMMP gas sensing properties. However, as the flow rate of oxygen plasma increases, the specific surface area tends to decrease because etching on the surface of activated carbon fibers occurs due to active species generated during the oxygen plasma treatment. The resistance change rate of the DMMP gas sensor increased from 4.2 up to 25.1% as the oxygen plasma treatment flow rate increased. This is attributed to the hydrogen bonding between DMMP gas and introduced hydroxyl functional group on activated carbon fibers by the oxygen plasma treatment. Therefore, the oxygen plasma is considered to be one of the important surface treatment methods for detecting chemical warfare agents at room temperature.