• Prospectives of Industrial Chemistry
• /
• v.15 no.6
• /
• pp.39-53
• /
• 2012

지속가능한 바이오매스 자원으로부터 열, 전력을 비롯하여 연료부터 화학원료까지 다양한 제품들을 생산하는 열화학적 전환 공정들이 높은 관심을 받고 있다. 특히 수소, 일산화탄소로 구성된 합성가스를 생산하고 이를 전력, 연료 등을 동시에 생산하는 가스화 공정에 대한 학계, 산업계, 정부의 관심이 매우 높다. 그러나 바이오매스 가스화를 통해 생산된 합성가스는 타르, 황산화물 등의 오염물질들을 함유하고 있어 후속 공정들의 이용을 위하여 정제 공정을 반드시 거쳐야 한다. 본고에서는 바이오매스 가스화 기술에 적용되는 일반적인 정제 과정에 대해서 서술하였으며 세부적으로 불순물 제거 공정, 산성가스 제거 공정, 타르 제거 공정 등의 연구 개발 동향을 살펴보았다.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.29-50
• /
• 2003

Physicochemical Properties of acid mine water of the Chonam-ri Creek and the Sagok-ri Creek in the Kwangyang Au-Ag mine area were determined using geochemical approaches. Metal contamination (Cd, Cu, Pb, Zn) is more serious in the Chonam-ri Creek than in the Sagok-ri Creek. However, the contents of Al and Fe is higher in the Sagok-ri Creek. Such differences between the two creeks probably reflect the abundance and composition of ore minerals. The attenuation processes for acid mine water in both creeks were investigated. In the Chonam-ri Creek, a small retention pond which contains limestone plays an important role in the removal of heavy metals by adsorption or coprecipitation due to increase of pH. The capacity of metal scavenging in this pond depends on the seasonal variation of inflow volume. Reddish yellow precipitates sampled in the Chonam-ri Creek were analyzed by XRD, SEM-EDS, EPMA, and chemical decomposition. The precipitates mainly consist of goethite and are also enriched in Al, Mn, Cu and Zn. This inditates that precipitation of goethite is important for scavenging those trace elements, possibly due to adsorption or coprecipitation. In the Sagok-ri Creek, on the other hand, hydrologic mixing of uncontaminated tributaries results in removal of heavy metals with iron hydroxides precipitation due to the pH increase. The mechanisms proposed for metal attenuation at the confluence between contaminated mine water and uncontaminated tributary water are also explained by the property-property plots.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1027-1033
• /
• 1996

Under the Irradiation of the radiofrequency wave, the dipole materials vibrate as microwavic phase change. This causes friction between adjacent molecules and enables an unique charateristics of interior heating of the materials. When dipole gases are adsorbed inside of a solid radiofrequency wave absorber, the gases can be decomposed easily by the microwave energy. The decomposition of sour gases was successfully tested in this manner to develop a sour gas removal process from the combustion flue gas. The standard gas bearing NO and $SO_2$ was passed through and microwave was applied on the calcined char bed as the wave absorber and the gas adsorbent. It was found that more then 95% of NO and 70 % of $SO_2$ was decomposed to the environmentally clean elements during the passage through the 20 gram char bed under the microwave impingement. The surface area and the porosity of char increased because the oxygen radicals produced from decomposed gas attacked carbon in the char capillaries and formed $CO_2$. For a lower concentration of sour gas, general cases in the commercial combustion processes, almost complete decomposion is believed possible and this method is surely expected to be useful for the prevention of air pollutions.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.135-138
• /
• 2004

본 연구는 중금속으로 오염된 폐수처리에 있어 친환경적 유기흡착제로서 휴믹물질의 활용성을 평가하기 위한 기초 연구로서 이탄(peat moss)으로부터 Humin을 분리 한 후, 중금속 이온(Cd(II),Cu(II))과의 흡착특성을 조사하였다. 이탄으로부터 추출한 peat-Humin의 함량은 94%이상을 나타냈으며, 분자의 작용기 특성은 일반 토양 휴믹물질(soil humic substance)과 유사하였다. peat-Humin과 중금속 이온(Cd(II),Cu(II))과의 흡착 반응은 5분내에 빠른 흡착형을 보였으며, pH 5-6에서 가장 높은 중금속 제거율을 보였다. pH 3의 산성조건에서도 50%정도의 제거율을 보였다. pH 5에서의 등온흡착 실험결과를 Freundlich 등온식에 적용하여 해석한 결과, 각의 중금속에 대한 peat-Humin의 흡착상수(Kf)는 Cd(II)이 8.07 그리고 Cu(II)가 4.56으로 나타났다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.247-254
• /
• 2016

Since microzirconia has excellent thermal and mechanical properties with high chemical and electrical resistance, it can be used in various fields. When the surface of zirconia becomes hydrophilic, its dispersibility in water will be improved as well as the resistance to most hydrophobic contaminants will be increased. In this study, we investigated the introduction of a hydrophilic groups on the microzircornia surface through hydrolysis and condensation reactions with two different silanes containing hydrophilic functional groups, such as ${\gamma}$-aminopropyltrimethoxysilane (APS) and ${\gamma}$-ureidopropyltrimethoxysilane (UPS) at different pH and concentration conditions. A covalent bond formation between the surface hydroxyl groups of zirconia and that of hydrolyzed silanes was confirmed by ninhydrin test and FT-IR spectroscopy. However, the presence of Si on the surfaces of both silane modified microzirconias was unable to detect by SEM/EDS technique. In addition, particle size analysis results provide that the size of microzirconia was changed to smaller or bigger than that of original zirconia due to crushing and aggregation during the modification process. The water dispersibility was improved for only APS modifed zirconia (AS-2 and AS-3) under neutral pH condition, but the water dispersibility and stability for all cases of 0.5~2% UPS modifed zirconia (US series) were much improved.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.5
• /
• pp.25-36
• /
• 2005

Several metalliferous and coal mines, including Myungjin, Seojin and Okdong located at the upper watershed of Okdong stream, were abandoned or closed since 1988 due to the mining industry promotion policy. Thus these disposed an enormous amount of mining wastes without a proper treatment facilities, resulting in water pollution in the downstream areas. Acid mine drainage (AMD) and waste water effluents from the closed coal mines were very strongly acidic showing pH ranges of 2.7 to 4.5 and had a high level of Total Dissolved Solids (TDS) showing the ranges of 1,030 to 1,947 mg/L. Also heavy metal concentrations in these samples such as Fe, Cu, Cd and anion such as sulfate were very high. Concentrations of water soluble heavy metals in the Okdong streams were in the orders of Fe>Al>Mn>Zn>Cu>Pb>Cd, indicating Fe from the AMD and waste water effluents contributed greatly to the quality of water and soil in the lower watershed of Okdong stream. Copper concentrations in the effluents from the tile drainage of mine tailings dams were highest during the raining season. Water Pollution Index (WPI) of the surface water at the upper stream of Okdong river where AMD of the abandoned coal mines was flowed into main stream were in the ranges of 16.3 to 47.1. On the other hand, those at the mid stream where effluents from tailings dams and coal mines flowed into main stream were in the WPI ranges of 10.6 to 19.5. However, those at the lower stream were ranged from 10.6 to 14.9. These results indicated that mining wastes such as AMD and effluents from the closed mines were the major source to water pollution at the Okdong stream areas.

• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.269-276
• /
• 1992

An ion-exchange/conductometric method is applied for the determination of total acidity in simulated atmospheric samples. Non-$H^+$ cations and strong acid anions are enriched by the preconcentrator columns in series and eluted through the corresponding parallel suppressor units. The conductivities from each channel correspond to the concentrations of the resulting ionized species in equivalents per unit volume. The difference is the measure of acidity due to strong acids. With 5-min sampling at a flow rate of 0.3 mL/min, the detection limits for ${NH_4}^+$ and ${SO_4}^{2-}$ are 0.3 and $0.1{\mu}equiv/L$, respectively. The acidity for samples composed of various ions can be determined without significant error, usually less than 5%. The proposed method discriminates against the artifact from the $CO_2$ dissolution. Principles of acidity measurements are also presented.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.405-412
• /
• 2011

Environmental impact by proposed pump and treatment remediation of groundwater contaminated with TCE over 0.6 mg/L down to 0.005 mg/L was assessed for 30 years operation in an industrial park. Total amount of groundwater treated was $2.96{\times}10^7m^3$ and the amount of TCE removed was 17.6 kg at most. The life cycle assessment was used to estimate the environmental cost and environmental benefit and their effects on the environment could be analyzed. Most of the environmental cost was accrued from electricity generation for 30 years pump operation, which includes energy consumption, resources consumption such as coal, crude oil, emission of global warming gas and acid gas into air, waste water production, and waste generation. Environmental impact could be quantified with a Life Cycle Assessment (LCA) model for soil and groundwater remediation and normalized based upon consumption and emission quantities per capita in the world. Among the normalized values, acidification material release was the most significant.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.113-120
• /
• 1999

Winter and summer samples were collected from January 3 to February 7, 1997 and July 26 to September 11, 1997, respectively, in Seoul. This study was to characterize the concentrations of the annular denuder system (ADS) were $HNO_3$, $HNO_2$, $SO_2$ and $NH_3$ in the gas phase, and $PM_{2.5}$ ($d_p$〈2.5$mu extrm{m}$), $SO_4^{2-}$, NO3-, and $NH_4^+$ in the particulate phase. All chemical species monitored from this study showed statistical seasonal variations except for $SO_4^{2-}$ . Nitric acid (HNO3) and ammonia ($NH_3$) exhibited substantially higher concentrations during the summer, while nitrous acid ($HNO_2$) and sulfur dioxide ($SO_2$) concentrations were higher during the winter. $PM_{2.5}$, $NO_3^-$, and $NH_4^+$ were higher leves in the winter. High correlations were found among $PM_{2.5}$, $NO_3^-$ $SO_4^{2-}$ and $NH_4^+$ during two seasons.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.235-238
• /
• 2004

본 연구는 반도체소자 제조공정에 적용되는 CMP공정 중 LPP(Landing Plug Poly) Contact간의 소자 분리를 위해 진행되는 LPP CMP의 후 세정 과정에서 유발되는 방사형 Defect 제거에 관한 내용이다. 방사형 Defect은 LPP CMP 후에 노출되는 BPSG, Poly, Nitride Film과 연마재로 사용되는SiO2 입자, 후 세정과정에서 적용되는 SC-1, DHF, $NH_4OH$ Chemical과 Brush와의 상호작용에 의해 발생되며, Cleaning시의 산성 분위기 하에서 각 물질간의 pH와 Zeta Potential의 차이에서 기인한다. 이 Defect을 제거하기 위해 LPP CMP후에 Film 표면에 노출되는 각 물질의 표면 특성과 CMP 후 오염입자의 흡착과 재 흡착에 영향을 미치는 Electrostatic force와 Van der Waals force, PVA Brush에 의한 Mechanical force의 상호작용을 고려하여 최적 후 세정 조건을 제시 하였다.