• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.957-964
• /
• 2010

The deactivated catalyzed diesel particulate filter-trap (DPF) was remanufactured by ultrasonic wave treatment with various prepared solutions, followed by active component re-impregnation, and the emission control performance and surface properties of remanufactured DPF were studied at various remanufacturing conditions. The proper ultrasonic wave cleaning time at various prepared solutions and optimal re-impregnation amounts of active component for the best emission control performance of DPF were investigated and its performance tests were also carried out with various temperatures for the conversions of CO, THC (total hydrocarbon) and PM (particulate matter) by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the emission control performance of DPF remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acid/base solutions and active component re-impregnation method was recovered to 95% level of its activity compared to that of the fresh DPF, which was caused by removing the deactivating materials from the surface of the DPF, through the analyses of performance test and their surface characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• Korean Journal of Environment and Ecology
• /
• v.12 no.2
• /
• pp.131-137
• /
• 1998

This study was performed to investigate tree injury with air pollution and acid precipitation in industrial area and rural area. This study analyzed the ion properties of pollutant precipitated in the forest of Ulsan ＆ Onsan area and correlation between S $O_2$concentration in air and the degree of forest decline. pH of industrial area was lower than that of rural area and electrical conductivity and pH had a negative correlation(r=-.7861$^{**}$). Correlation of cation and anion(especially S $O_{4}$$^{2-}$, N $O_{3}$$^{[-10]}$ ) in precipitation and S $O_2$in air was higher in industrial area. In seasonal change, winter and spring were higher. In the analysis of correlation between forest decline and variables of precipitation properties, correlation coefficient was higher by following order: S $O_{4}$$^{2-}$>pH>EC>N $O_{3}$$^{[-10]}$ >S $O_{2}$$^{2-}$>C $l^{[-10]}$ . Regression formula by computation was Y = 5.1007-0.7811 $X_2$(pH) +0.0253 $X_{5}$ (S $O_{4}$$^{2-}$) +0.0275 $X_{6}$ (N $O_{3}$$^{[-10]}$ ). In considering the result of this study, it was predicted that air pollution and acid rain would affect soil acidification and forest decline continuously.y.

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.57-65
• /
• 2012

Fertilization is essential to seedling production in nursery culture, but excessive fertilization can contaminate surface and ground water around the nursery. The objective of this study was to find optimal fertilization practice of container seedling production for reducing soil and water contamination around the nursery without compromising seedling quality. This study was conducted to investigate chemical properties of the growth medium, growth performance, chlorophyll fluorescence, and chlorophyll contents of larch ($Larix$ $kaempferi$) growing under three different fertilization treatments (Constant rate, Three stage rate, and Exponential rate fertilization). Root collar diameter and height of larch were not significantly different among treatments even though the nutrient supply of the exponential treatment was half that of the constant and three stage treatments. Chemical properties of the growth medium showed the same trends as root collar diameter and height. The total biomass and seedling quality index (SQI) were higher at Constant than at other treatments, but both SQI of Constant and Exponential were not significantly different. Photochemical efficiency and chlorophyll contents were lower at Exponential than at other treatments, but not significantly different among treatments. Therefore, Exponential fertilization which is 50% fertilizer of other treatments would maximize seedling growth and minimize nutrient loss.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.151-151
• /
• 2023

본 연구는 호우(heavy rain) 발생 시 대기 중 미세먼지(particulate matter, PM) 저감효과를 규명하고 강우 지속에 따른 빗물 수질(pH, 전기전도도(electrical conductivity, EC), 수용성 이온) 분석을 통해 대기 중 PM이 빗물 수질에 미치는 영향을 평가하였다. 2020년 3월부터 2021년 2월까지강우 강도(7.5 mm/h)를 기준으로 총 6회의 강우를 대상으로 하였으며 빗물 샘플은 집수장치를 통해 50 mL를 연속적으로 수집하여 수질을 분석하였다. 대기 중 PM_2.5 (≤ 2.5 ㎛ in diameter) 및 PM₁₀ (≤ 10 ㎛ in diameter) 농도는 기상청 내 부산 남구 대연동 관측소의 automatic weather system (AWS)에서 측정된 일평균 자료를 이용하였다. 강우에 따른 대기 중 PM의 저감효율은 상대적으로 PM₁₀에서 뚜렷하게 나타났으며, 특히 강우 강도 7.5 mm/h 이상(유형 1)의 호우 발생 시60% 이상의 저감효율을 보였다. 반면, 강우 강도 7.5 mm/h 이하(유형 2)일 때는 10% 이하의 저감효율을 보였으며, 강우 지속에 따라 대기 중 PM₁₀ 농도가 증가하는 경향을 보이기도 하였다. 총108개의 빗물 샘플 수질을 분석한 결과, 유형 1의 경우 초기 빗물의 평균 EC는 58.5 µS/cm으로 상대적으로 높았으며 대기 중 PM₁₀과 양의 상관관계(r = 0.99)를 보였고 평균 pH는 4.3으로 산성도가 높게 나타났으며 대기 중 PM₁₀과 음의 상관관계(r = -0.99)를 보였다. 반면, 유형 2의 경우 대기 중 PM₁₀과 EC (r = -0.56) 및 pH (r = -0.41) 간 뚜렷한 상관관계가 나타나지 않았다. 또한 강우가 지속됨에 따라 EC와 수용성 양이온(Na⁺, Mg²⁺, K⁺, Ca²⁺, NH₄⁺) 및 음이온(Cl^-, NO₃^-, SO₄^2-)의 농도는 지속적으로 감소하는 경향을 보였으나 pH의 경우 강우 강도에 따라 증감의 경향이 다르게 나타났다. 유형 1의 경우 강우 지속에 따라 pH가 증가하여 산성도가 낮아졌으나 유형 2는 pH의 증감 형태를 뚜렷하게 확인하기 어려웠다. 연구 결과를 통해 강우 초기 높은 강도로 강우가 지속될 경우 대기 중 PM₁₀이 빗물 수질에 영향을 미칠 수 있는 것으로 판단되며, 이에 따라 호우 발생 시 강우가 대기 중 오염물질을 지표면으로 유입시킬 수 있는 매개체로 작용할 수 있음을 지시한다.

• Journal of Korean Society of Forest Science
• /
• v.78 no.1
• /
• pp.11-25
• /
• 1989

Four regions have been selected and surveyed to investigate the effects of air pollution and acid deposition on forest ecosystem. They were Seoul as urban region, Yeochon and Ulsan as industrialized region, and Kangwondo as uncontaminated region. Soil pH and the distribution of elements were analyzed in process of time for three years as well as by distance from pollution sources. In general, forest soils acidified in process of time from pollution sources to suburban areas. Hydrogen ion concentration in forest soils increased in 1988 as much as 60% of that in previous year. Average soil pH values in coniferous forest were 4.45 in Seoul, 4.54 in Yeochon, 4.81 in Ulsan, and 6.03 in Kangwondo. Forest soil pH increased with the distance from pollution sources to suburban areas at constant rate within short ranges (up to 30 km) and at decreasing rate within long ranges (up to 200 km). On the contrary, sulfur content in soils decreased every year except in Yeochon region. Base saturation of forest soils in polluted regions were all below 20% level compared with 70% in Kangwondo region. Active aluminum content in soils increased with the soil acidification at the highest rate in Yeochon, and the next in Ulsan and Seoul. Heavy metal content such as copper and zinc in tree tissues were the lowest in Kangwondo region, and the next in Yeochon, Seoul and Ulsan.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.200-204
• /
• 1998

Physical and chemical properties of artificial soil produced by firing process were analyzed and compared with normal dry field soil and soil quality standards. Material used for production was water and wastewater treatment sludge, chabizite, and lime. The mixed material was thermally treated in the firing kiln at about $300^{\circ}C$ and $1,000^{\circ}C$, respectively, as per designed process. General properties of the artificial soil were classified as sand by unified soil classification method and similar to the dry-field soil, and even soil conditioning effect were expected when it is mixed properly with normal soil. The artificial soil is high in pH and permeability compared to the dry-field soil. Heavy metal concentrations of the artificial soil met the soil quality standards for the farmland. Overall, the artificial soil was thought to be an appropriate soil which can be returned safely to the nature without significant adverse effect. The cost for the artificial soil production process needs to be lowered for practical application as a sludge treatment, therefore, commercializing of the artificial soil is under review.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.5
• /
• pp.352-357
• /
• 2009

Due to rapid consumption of hydrogen peroxide, large amount of hydrogen peroxide is required when Fenton reaction is applied to the contaminated soil. In this study, acetate was employed as a ligand of $Fe^{2+}$ to enhance the efficiency of removal of phenanthrene by securing the stability of hydrogen peroxide. 0.5 ${\sim}$ 3 times of acetate (2${\sim}$12mM) was added to compare with molar concentration of $Fe^{2+}$. Low initial concentration of hydrogen peroxide was 0.7% to eliminate side effect of removal efficiency. The results showed that hydrogen peroxide lifetime was lasted up to 72 hours, or more than 50 times of normal lifetime. Phenanthrene removal efficiency was improved up to 70% due to stabilized hydrogen peroxide. Ferrous ion was oxidized to ferric ion and oxidation-reduction was repeated during the reaction. Finally ferric ion was reduced to ferrous by $HO_2$. It was confirmed that, due to the influence of hydrogen peroxide, pH was acid region and it remained at the range of 4 ${\sim}$ 5 when 8 mM or more of acetate was added. Acetate which was used as the ligand of Fe was also decomposed by Fenton reaction. The decomposition time of acetate was slower than phenanthrene. Therefore, it was able to come to the conclusion that phenanthrene was superior to acetate at the competition for decomposition. Through the results of this study, it was able to identify the possibilities to improve the efficiency of Fenton reaction in the contaminated soil and its economic feasibility, and to move to more realistic technique through research expanded to neutral pH region.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.60-60
• /
• 1998

아연도금강판은 내식성이 우수하여 자동차용 강판으로 널리 쓰이고 있다. 자동차용 강판은 spot 용접에 의해서 각 부분들이 접합되는데 도금층으로 사용되는 아연은 강판보다 융점이 낮아서 용접작업을 저하시킨다. 현재 사용되는 작업조건에서 용접 타 접수가 평균 2000회를 넘게되면 용접되는 부위의 면적이 감소되어 접합강도가 떨어지게된다. 따라서, 아연이 도금된 강판을 용접하게되면 작업성이 저하되므로 도금층의 성분에 대한 변화를 주므로서 이에 대한 개선을 할 필요가 있다.. Cole, Dickenson 및 Kimchi 등은 도금충내의 알루미늄을 0.1~0.5%(중량비) 함유하는 아연도금강판은 저항용접시 도금충내의 알루미늄 함량에 따라 용접성이 영향을 받는다고 보고하였다. 전극수명은 도금층내의 알루미늄 함량이 증가할수록 떨어지는데 알루미늄이 0.5% 이 하로 함유된 아연도금강판의 경우는 용접타접수가 2000~6000회에 이르르나 알루미늄 이 50%이상 함유된 합금도금강판은 200-600회에 불과한 것으로 나타난다. H. M Matsuda 등은 도금층의 알루미늄이 용접성에 영향을 미치는 이유로서 도금층의 용융 온도 변화를 지적하였다. 도금충내에 알루미늄의 함량이 높게되면 철과 아연의 확산에 의한 합금화 반응이 저하되어 도금층의 용융온도가 높아지지 못하므로 용접성이 나빠지게 된다. 본 연구에서는 아연도금욕의 조성은 기존의 상태로 유지하고 제3의 원소를 첨가하여 도금층에 함유되는 알루미늄의 양에 미치는 효과를 조사하였다. 도금층의 불성변화 및 그에 따른 내식성을 조사하였으며 도금층의 조직변화도 함께 관찰하였다. 아울러 첨가원소에 의한 도금욕의 특성도 평가하였다. 첨가원소에 의해서 도금충내의 알루미늄 함량은 감소하는 경향을 나타내었으며 도금층의 물성은 주어진 조성범위 내에서 별다른 변화를 나타내지 않았다.brittlement)기구도 제안되고 었다. 원전의 냉각수는 고 순도의 물이지만 수 처리 과정과 웅축기 배관의 누수로 인한 산소, $Cu^{2+},{\;}S_xO_6{\;}^{2-}(x=3~6)$ 등이 유입되어 오염되는데 이려한 오염물질들이 수 ppm정도 소량 포함된 경우 응 력부식민감도는 상당히 증가된다. 산성분위기 흑은 산소, $Cu^{2+}$, 등이 소량 포합된 산화성 분위기 그리고 sufur oxyanion 에 오염된 고온의 물에서 600 의 IGSCC 민감도는 예민화도가 증가할 수록 민감하여 304 의 IGSCC 와 매우 유사한 거동을 보인다. 본 강연에서는 304 와 600 의 고온 물에서 일어나는 IGSCC 민감도에 미치는 환경, 예민화처리, 합금원소의 영향을 고찰하고 이에 대한 최근의 연구 동향과 방식 방법을 다룬다.다.의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.299-308
• /
• 2021

Fe(II) released from mining activities is precipitated as various Fe(III)-oxyhydroxides when exposed to an oxidizing environment including mine drainage. Ferrihydrite, one of the representative precipitated Fe(III) minerals, is easy to adsorb heavy metals and other pollutants due to the large specific surface area caused by very low crystallinity. Ferrihydrite is transformed to thermodynamically more stable goethite in the natural environment. Hence, information on the transformation of ferrihydrite to goethite and the related mobility of heavy metals in the acid mine drainage is important to predict the behaviors of those elements during ferrihydrite to goethite transition. The behaviors of heavy metals during the transformation of ferrihydrite to goethite were investigated for core samples collected from an AMD treatment system in the Heungjin-Taemaek coal mine by using X-ray diffraction (XRD), chemical analysis, and statistical analysis. XRD results showed that ferrihydrite gradually transformed to goethite from the top to the bottom of the core samples. Chemical analysis showed that the relative concentration of As was significantly high in the core samples compared with that in the drainage, indicating that As was likely to be adsorbed strongly on or coprecipitated with iron oxyhydroxide. Correlation analysis also indicated that As can be easily removed from mine drainage during iron mineral precipitation due to its high affinity to Fe. The concentration ratio of As, Cd, Co, Ni, and Zn to Fe generally decreased with depth in the core samples, suggesting that mineral transformation can increase those concentrations in the drainage. In contrast, the concentration ratio of Cr to Fe increased with depth, which can be explained by the chemical bond of iron oxide and chromate, and surface charge of ferrihydrite and goethite.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.555-564
• /
• 2010

Remediation process by using the bio-carrier (beads) with dead Bacillus sp. B1 and polysulfone was investigated for heavy metal contaminated groundwater. Sorption batch experiments using the bio-carrier were performed to quantify the heavy metal removal efficiencies from the contaminated solution. The analyses using SEM/EDS and TEM for the structure and the characteristic of precipitates on/inside the beads were also conducted to understand the sorption mechanism by the bio-carrier. Various amounts of freeze-dried dead Bacillus sp. B1 were mixed with polysulfone + DMF(N,N-dimethylformamide) solution to produce the bio-carrier (beads; less than 2mm in diameter) and 5% of Bacillus sp. B1 in the bio-carrier was optimal for Pb removal in the solution. The removal efficiency ratings of the bio-carrier for Pb, Cu and Cd were greater than 80% after adding 2g of bio-carrier in 50ml of aqueous solution (<10mg/L of each heavy metal concentration). Reaction time of the bio-carrier was very fast and most of the sorption reaction for heavy metals were completed within few hours. Batch experiments were duplicated at various pH conditions of aqueous solutions and Cu and Pb removal efficiencies highly maintained at wide pH ranges (pH 2-12), suggesting that the bio-carrier can be useful to clean up the acidic waste water such as AMD. From SEM/EDS and TEM analyses, it was observed that the bio-carrier was spherical shape and was overlapped by many porous layers. During the sorption experiment, Pb was crystallized on the surface of porous layers and also was mainly concentrated at the boundary of Bacillus sp. B1 stroma and polysulfone substrate, showing that the main mechanism of the bio-carrier to remove heavy metals is the sorption on/inside of the bio-carriers and the bio-carriers are excellent biosorbents for the removal of heavy metal ions from groundwater.