• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.363-369
• /
• 2002

최근에 많이 사용되어지고 있는 치과용 접착제는 산 부식 후 수분이 있는 상태에서 적용하는 wet-bonding 술식을 많이 추천하고 있다. 하지만 self-etching primer의 경우 산부식과 priming 과정이 동시에 시행되고, 제조자들은 건조된 치아표면에 적용할 것을 추천하고 있다. 그러나 건조된 정도에 대하여서는 별다른 추천사항이 없으며. 수분이 self-etching primer에 어떤 영향을 미치는지에 대하여서는 별다른 연구가 이루어져 있지 않은 상태이다. 이에 본 연구에서는 치질 삭제 후 남아있는 수분이 self-etching primer의 레진 접착 강도에 어떤 영향을 미치는 지를 알아보고자 하였다. 발거한 대구치 96개를 이용하여 물기가 있는 상태에서 #600 사포로 표면을 연마하고, 법랑질 면을 노출시킨 군과 상아질을 노출시킨 군으로 분류 후, 30분 공기 중 방치 군 (1군), 5초 공기 건조 군 (2군), 1초 공기 건조 군 (3군), 솜으로 약간의 물기를 제거한 군(blot dry) (4군) 등 총 8개의 군으로 나누었다. Self-etching adhesive system인 Clearfil SE Bond primer를 20초간 적용하고, bonding제 도포 후 10초간 광중합 시행하였다. 접착제 처리한 치아면에 몰드를 고정한 후 Clearfil AP-X 복합레진을 2mm 충전하고, 40초간 광중합을 시행하였다. 24시간 후 전단 응력 결합강도를 측정하였으며, 그 결과는 다음과 같이 나타났다. 법랑질과 상아질 모두에서, 30분 건조군과 5초 공기건조군이 1초와 blot drying 군보다 높은 결합강도를 보였으며 통계학적으로 유의한 차이를 보였다(p＜0.05). 본 실험 결과에 의하면 self-etching adhesive system을 사용함에 있어서 법랑질과 상아질군 공히 건조된 상태에서 사용하여야 하며 수분의 존재시 치아와의 결합력이 감소하는 것으로 나타났다. 따라서 임상에서 접착제의 적용시 수분의 조절에 주의하여야 할 것으로 사료된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.82-88
• /
• 2017

The purpose of this study is to investigate shear bond strengths of $Peak^{(R)}$ Universal Bond (Ultradent, USA) containing 0.2% chlorhexidine in bovine dentin. Total of 30 bovine teeth were divided into three groups, 10 teeth each. Before comparing and evaluating shear bond strength, in group I, $Adper^{TM}$ Single Bond Universal (3M ESPE, USA) was applied, in group II, processing with $Consepsis^{(R)}$ (Ultradent, USA) was followed by applying $Adper^{TM}$ Single Bond Universal, and in group III, $Peak^{(R)}$ Universal Bond was applied and filled with $Filtek^{TM}$ Z-350 XT (3M/ESPE, USA) shade B3. As a result, processing with $Consepsis^{(R)}$ after acid etching showed no statistically significant influence on shear bond strength of dentin (p > 0.05). The shear bond strength of with or without $Consepsis^{(R)}$ on $Adper^{TM}$ Single Bond Universal and that of $Peak^{(R)}$ Universal Bond showed statistically significant difference (p < 0.05).

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.41-52
• /
• 1988

The purpose of this study was to investigate the pulpal responses to acid etching of dentine. Total 72 class V cavaties' were prepared on the healthy permanent teeth from 6 dogs, and were divided into 4 groups. These were filled with filling materials after acid etching with each etchant for 1 min. Control group ; ZOE filling without acid etching. Group 1: Zinc Oxide-Eugenol cement filling. Group 2: Drying with hot air and Zinc oxide-Eugenol cement filling. Group 3: Scotchbond application and silux filling. Group 4: Silux filling. The dogs were sacrificed after 1 week, 2 weeks, 3 weeks, 4 weeks, 5 weeks and 6 weeks following operation. The specimens were routinely prepared and stained with Hematoxylin and Eosin. Followings were the results obtained through microscopic examination. 1. There was mostly severe pulpal responses in case of Silux filling after acid etching of dentine. 2. The pulpal responses of Silux filling after acid etching and application of Scotch bond group were more severe compared to Zinc Oxide-Eugenol cement filling group, but less severe compared to Silux filling group after acid etching of dentine. 3. The pulpal responses of Zinc Oxide-Eugenol cement filling group were similar to those of Zinc Oxide-Eugenol cement filling after drying with hot air group. 4. There was slight pulpal responses in early stage in case of Zinc Oxide-Eugenol cement filling group, but recovered to normal state soon after.

• Journal of Society of Preventive Korean Medicine
• /
• v.13 no.3
• /
• pp.87-99
• /
• 2009

Objectives : The study was to examine the empirical evidence concerning the effects of massage intervention for the laboring women and to investigate the effect sizes related to the characteristics of intervention. Methods : Meta analysis was performed. A total of 11 trials related to massage intervention between 2000 and 2007 were reviewed. Results : Massage intervention showed a beneficial effect on length of labor(1st stage : U=46.75, p=0.00, 2nd stage : U=6.13, p=0.01), perception of childbirth experience(U=12.57, p=0.00), intensity of uterine contraction at the active(U=6.34, p=0.01) and the transition phases(U=24.83, p=0.00), and interval of uterine contraction at the active phase(U=4.83, p=0.03). Massage decreased systolic(U=10.81, p=0.00) and diastolic blood pressure at the transition phase(U=10.60, p=0.00). However, massage had no effect on subjective and objective labor pain and anxiety. No differences were found in effectiveness of massage according to characteristics of intervention(massage material, massager, and massage site) except for anxiety(QB=4.82, p=0.03) and diastolic blood pressure at the active phase by massage site(QB=4.52, p=0.03). Conclusions :We found that massage intervention for the laboring women had an empirical evidence on improving perception of childbirth experience and shortening length of labor. These results should be interpreted with caution due to the lack of studies. More full-scale randomized clinical trials with reliable designs are recommended to further warrant the effectiveness of massage.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.165-174
• /
• 1995

The purpose of this study was to evaluated the improve method of demineralization and damage on the enamel stufece related to bonded orthodontic bracket. Enamel surface of the 40 Intact premolars were treated by aicd etching and various fluoride application methods and then maintained in the patient mouth of 3 months. After extraction of all the sampled premolars, enamel surfaces were evaluated by Scanning electron microscope. The obtained results were as follow. 1. Enamel surface relate to bonded orthodontic bracket showed demineralization and damage, slightly. 2. Group 6 treated by $2\%$ NaF iontophoresis presented and almost similarity to nomral enamel surface. 3. Group 2 treated by acid etching had demineralization and damage on the enamel surface much more than other groups treated by various fluoride application methods. 4. Demineralization and damage on the enamel surface caused by bonded orthodontic bracket is improved by various fluoride application methods.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.147-155
• /
• 1989

In this paper, a real-time implementation of the TWS(track-while-scan) system using the high-speed DSP (digital signal processor) TMS320C25 is described. First, attempts have been made to investigate the FWL (finite word length) effect, which is caused by employing a fixed point arithmetic, of implementing the Kalman filter. The real-time TWS system consists of TWS arithmetic unit, scan converter, and system controller. In addition, the TWS system is in tegrated in the Multi-Bus. In experiment, it is observed that by employing the floating point arithmetic the computation time of 0.35sec is required for tracking 8 targets simultaneously, while 0.28sec is required for the fixed point arithmetic. Since the TWS system is designed to track up to 8 targets simultaneously, we conclude that the system is enough to process Kalman filter in a real-time.

• Journal of Korean Academy of Nursing
• /
• v.42 no.4
• /
• pp.599-607
• /
• 2012

Purpose: This study was conducted to evaluate the effect of a one-session spouse-support enhancement childbirth education on childbirth selfcefficacy and perception of childbirth experience. Methods: The design of this study was a nonequivalent control group pretest-posttest experiment. The participants in the study were 31 couples in the experimental group and 30 in the control group. The experimental couples were provided with one session on spouse-support enhancement childbirth education the night before delivery. Data were collected at two hours after delivery using the Childbirth Self-Efficacy Inventory (CBSEI) and perception of childbirth experience scale. Data were analyzed using PASW statistics 18 program. Frequencies, percentage, mean, $x^2test$, t-test were used for data analysis. Results: Childbirth self-efficacy significantly increased in the experimental group as compared to the control group, but there was no significant difference in perception of childbirth experience in the experimental group compared to the control group. Conclusion: The results suggest that a one-session childbirth education has beneficial effects on enhancing childbirth self-efficacy in pregnant couples. A one-session spouse-support enhancement childbirth education is recommended as an effective nursing intervention to promote couple's childbirth self-efficacy and it is also recommended that modifications of program to promote women's childbirth experience should be considered.

• Restorative Dentistry and Endodontics
• /
• v.28 no.3
• /
• pp.222-231
• /
• 2003

The purpose of this study was to compare shear bond strength and interfacial pattern of composite bond-ed to dentin using self-etching adhesive systems. Sixty extracted human molars with exposed occlusal dentin were divided into four groups and bonded with four adhesives and composites. Single Bond/Filtek Z 350(SB), Tyrian SPE-One-Step Plus/Aelitefil(TY), Prompt L-Pop/Filtek Z 250(LP), and One-Up Bond F/palfique Toughwell(OU). The results of this study were as follows; 1 Shear bond strength for OU was significantly lower than that of other groups(p＜0.05). No significant difference was founded among SB, TY, and LP. 2. Failure modes to dentin showed adhesive and mixed for SB TY and LP, but them for OU showed adhesive in all spceimens. 3. Dentin-resin interface showed close adaptation for SB, TY, and LP, but it showed gap for OU. 4. The hybrid layers for TY, LP OU were thinner than that of SB. Adhesive layers were observed between composite and hybrid layer, which were 5 $\mu\textrm{m}$ thick for TY and 10 $\mu\textrm{m}$ thick for OU.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.210-216
• /
• 2002

Air abrasion technology can prepare enamel and dentin for bonding, similar to etching by acidic gels and solutions. Longer treatment can excavate pit and fissures, preparing the tooth for immediate placement of bonded resin materials. Although not appropriate for every clinical situation, the air abrasive technology minimizes heat, vibration and bone-conducted noise associated with conventional means of caries removal since the cutting is accomplished by air pressure. Also, patients treated with the air-abrasion technology rarely request anesthesia. Air abrasion technology was more effective in treating early carious lesions and stains compared to lesions where caries had already progressed to produce soft dentin and the strong air stream and noise caused by the evacuation system was a major discomfort to pediatric patients, and the experience and skillfulness of clinician should be required for accurate and proper tooth preparation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.191-199
• /
• 2005

This study was experienced in order to obtain the shear bond strength of orthodontic bracket adhesives under the blood contamination that can be occurred during the procedure of bracket bonding under window opening surgery. As a result of this study, shear bond strength of all glass ionomer groups were lower than resin cement groups. However, the strength of uncontaminated and post-contaminated group of glass ionomer was strong enough to perform an orthodontic forced eruption. This study revealed that during a window opening surgery, glass ionomer without etching procedure is available in order to bond a bracket if surface of teeth is not pre-contaminated by blood before the adhesive application. Both simple procedure and less adhesives remnant after bonding failure could make light-cured glass ionomer cement the ultimate choice for racket bonding.