• Korean Journal of Mineralogy and Petrology
• /
• 제35권3호
• /
• pp.333-344
• /
• 2022

The quarrying and utilization of natural building stones such as granite and marble are rapidly emerging in developing countries. A huge amount of wastes is being generated during the processing, cutting and sizing of these stones to make them useable. These wastes are disposed of in the open environment and the toxic nature of these wastes negatively affects the environment and human health. The growth trend in the world stone industry was confirmed in output for 2019, increasing more than one percent and reaching a new peak of some 155 million tons, excluding quarry discards. Per-capita stone use rose to 268 square meters per thousand persons (m²/1,000 inh), from 266 the previous year and 177 in 2001. However, we have to take into consideration that the world's gross quarrying production was about 316 million tons (100%) in 2019; about 53% of that amount, however, is regarded as quarrying waste. With regards to the stone processing stage, we have noticed that the world production has reached 91.15 million tons (29%), and consequently this means that 63.35 million tons of stone-processing scraps is produced. Therefore, we can say that, on a global level, if the quantity of material extracted in the quarry is 100%, the total percentage of waste is about 71%. This raises a substantial problem from the environmental, economical and social point of view. There are essentially three ways of dealing with inorganic waste, namely, reuse, recycling, or disposal in landfills. Reuse and recycling are the preferred waste management methods that consider environmental sustainability and the opportunity to generate important economic returns. Although there are many possible applications for stone waste, they can be summarized into three main general applications, namely, fillers for binders, ceramic formulations, and environmental applications. The use of residual sludge for substrate production seems to be highly promising: the substrate can be used for quarry rehabilitation and in the rehabilitation of industrial sites. This new product (artificial soil) could be included in the list of the materials to use in addition to topsoil for civil works, railway embankments roundabouts and stone sludge wastes could be used for the neutralization of acidic soil to increase the yield. Stone waste is also possible to find several examples of studies for the recovery of mineral residues, including the extraction of metallic elements, and mineral components, the production of construction raw materials, power generation, building materials, and gas and water treatment.

• Journal of agriculture & life science
• /
• 제45권6호
• /
• pp.41-46
• /
• 2011

In this study, in addition to the green tea-wood fiber hybrid composite boards of previous researches, to make effective use of saw dust of domestic cypress tree with functionalities and application as interior materials, eco-friendly hybrid composite boards were manufactured from wood fiber, green tea and saw dust of cypress tree. We investigated the effect of the component ratio of saw dust and green tea on static bending strength performances. Static bending MOE (modulus of elasticity) was within 0.956~1.18GPa, and showed the highest value in wood fiber : green tea : saw dust = 50 : 40 : 10 of the component ratio, and had the lowest value in 50 : 30 : 20 of component ratio. These values were 2.0~3.1times lower than those of green tea-wood fiber hybrid composite boards reported in the previous researches. The bending MOR (modulus of rupture) showed 8.99~11.5MPa, the change of the bending MOR with component ratio of the factors was the same as that of bending MOE. These values had 1.9~3.5 times lower value than those of green tea-wood fiber hybrid composite boards, and showed the slightly lower values than the MOR of particle boards (PB) and medium density fiberboards (MDF) prescribed in Korean Industrial Standard. Therefore, it is considered that these hybrid composite boards need to improve strength performances by component ratio change, hybrid composite with other materials and adhesive change etc. in order to industrialize the hybrid composite boards.

• Journal of Korean Society of Forest Science
• /
• 제87권3호
• /
• pp.391-403
• /
• 1998

The study was carried out to devise a proper measure to increase the income of mountain villagers by producing sap water of Acer mono, and to make the most of sap water as local specialty to contribute to the local economy of mountain villages. All the processes from collecting to marketing of sap water of Acer mono was investigated. The survey was done from mid-January to mid-February in the 3 major sap water collecting regions, Toji-myon Kurey-gun(Piagol area of Mt. Chiri), Okryong-myon Kwangyang city(Mt. Baekun), and Jookhack-ri Sunchon(Mt. Chokey). A total of 90 householders who collect sap water, to say again, 30 householders in each region, were interviewed personally to make up questionnaires. The habitual or general practices about collecting sap water, the selling price, the sales process, labor power to collect and carry down, carrying distance and facilities, sales income and side income, and family income were investigated and examined. Spots of collecting sap water were not concentrated but scattered all over the collecting area. Collecting method, collecting amount, sales process, and selling price varied with the village and region. Sap water was collected by tapping or boring method, the latter of which was widely used in lots of regions except in Sunchon. Although the amount of sap production per family varied with region, the average amount was about 1,350 liters. Of all the sap water collected, 44% was consumed by drinking of on-the-spot visitors and 36% was sold by order, etc. Sap water was sold at the price varying from 10,000 won to 60,000 won per 18 liters. The average selling price was 41,000 won, but selling prices of 43,000 won and 45,000 wan amounted to 38% and 25%, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제30권4호
• /
• pp.67-83
• /
• 2022

Biochar is a carbon material produced through the pyrolysis of agricultural biomass with limited oxygen condition. It has been suggested to enhance the carbon sequestration and mineralization of soil carbon. Objective of this study was to investigate soil potential carbon mineralization and carbon dioxide(CO₂) emissions in different soils cooperated with barely straw and livestock manure biochars in the closed chamber. The incubation was conducted during 49 days using a closed chamber. The treatments consisted of 2 different biochars that were originated from barley straw and livestock manure, and application amounts were 0, 5, 10 and 20 ton ha^-1 with different soils as upland, protected cultivation, converted and reclaimed. The results indicated that the TC increased significantly in all soils after biochar application. Mineralization of soil carbon was well fitted for Kinetic first-order exponential rate model equation (P<0.001). Potential mineralization rate ranged from 8.7 to 15.5% and 8.2 to 16.5% in the barely straw biochar and livestock manure biochar treatments, respectively. The highest CO₂ emission was 81.94 mg kg^-1 in the upland soil, and it was more emitted CO₂ for barely straw biochar application than its livestock biochar regardless of their application rates. Soil amendment of biochar is suitable for barely straw biochar regardless of application rates for mitigation of CO₂ emission in the cropland.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제6권2호
• /
• pp.7-30
• /
• 1998

Generation and recycling potential of organic waste in Korea were estimated. Status of organic waste composting and compost utilization also were surveyed to promote the recycling of organic waste. From 1994 to 1997, generation of garbage decreased gradually while recycling rate increased due to positive governmental strategy. During the same period, livestock waste increased 11.2%. Municipal wastewater sludge was generated 3,500 ton/day which was 0.03% of wastewater treated in 1996. The energy Potential of industrial organic waste was estimated to 288 million TOE which was 1.75% of the nationwide first energy consumption in 1996. Recycling of industrial sludge was low to 31%, while recycling of animal waste, plant scraps, and wasted paper were relatively high over 50%. Industrial sludge should be recycled more as it was the most part of industrial organic waste. Conventional composting materials were mainly livestock waste, food processing waste, fishery waste, sawdust, and nightsoil. Garbage and sludge have been composted recently. 420,000 tons of compost in 1996 were produced by 288 makers, the most of which were utilized in agriculture. It was suggested that separated collection, compost standard, and quality management should be provided to promote the composting of organic waste.

• Applied Chemistry for Engineering
• /
• 제24권4호
• /
• pp.428-432
• /
• 2013

From the forest areas in Chungbuk, large amounts of wood wastes by pruning are generated, however most of them considered as by-products are not treated properly with no disposal options. In this work, among diverse wood wastes such as Quercus variabillis, Juniperus chinensis, Larix kaemoferi, and Pinus densiflora, Juniperus chinensis was found to be more effective biosorbent for the removal of lead ions than other wood wastes. Also, the enhancement of lead removal efficiency from the aqueous phase was investigated using Juniperus chinensis waste. It was observed that the optimal initial pH to increase the removal efficiency of 20 mg/L lead ions was 4.0 and the optimal dosage concentration with regard to the biosorbent for the enhanced removal of 50 mg/L lead ions was 0.6 g/100 mL. In addition, chemical treatment of Juniperus chinensis waste with sulfuric acid was required to improve the adsorption capacity for high lead concentrations (over 100 mg/L). When Juniperus chinensis waste was chemically treated with 6 M sulfuric acid, the adsorption quantities of lead ions were 180, 340, and 425 mg/g with regard to 200, 400, and 500 mg/L lead ions concentrations, respectively. These results indicate that the practical biosorbent technology developed in this study is a highly efficient method to treat the lead ion from an aqueous solution.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제26권3호
• /
• pp.55-61
• /
• 2018

This study evaluated if the selected samples meets the Solid Refuse Fuel quality criteria in Korea. Biomass and plastic wastes generated in D City were mixed in diverse ratio. When the biomass content was about 40%, the moisture content was close to the SRF criteria and was measured to be 9.8%. The ash contents were analyzed up to 4.19%, and the lower calorific values based on Steuer, Dulong Equation and Bomb Calorimeter were at least 4,851, 4,181 and 3,847 kcal/kg, respectively. As a result of the elemental analysis, sulfur and chloride content were measured up to 0.05%. Those values satisfied the SRF criteria. Also, heavy metals(Hg, Cd, Pb, As) were analyzed to be below the SRF criteria. This makes it possible to use efficiently the wood byproducts abandoned in the woods, and the physical properties of wood being weak to moisture can be supplemented with plastics. Consequently, if plastic and biomass were well mixed and made into SRF, it would overcome the problem of shortening the life span of incineration facilities due to the high temperature of plastic wastes in the incinerator.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.318-326
• /
• 2014

This study was conducted to investigate the potential of non-used forest biomass residues as raw materials for making wood pellets with additives such as wood tar and starch and to evaluate fuel characteristics of the pellets. Wood tar, a by-product provided from the carbonization process of wood, could be a suitable additive for wood pellet production due to its higher calorific value and lower hazardous heavy metals, such as cadmium and mercury, compared to woody biomass. When the wood tar (10 wt%) was added, the calorific value was increased from 4,630 kcal/kg (wood pellet without additive) to 4,800 kcal/kg (wood pellet with additive). With the increase of additive amount into wood pellet, the length and individual density of wood pellet increased. In addition, bulk density of the pellets was increased, whereas the fine content was decreased. Consequently the overall productivity of wood pellets was improved by adding 2 w% additives into wood pellets; the percentage of productivity increase was 5.9% and 4.9% for adding starch and wood tar, respectively.

• Journal of Korean Society of Forest Science
• /
• 제48권1호
• /
• pp.40-50
• /
• 1980

This research was carried out to examine the substitutional feasibility of low-priced materials produced in waste of forest instead of wheat flour which is extended for plywood adhesives. Wheat, pine bark, wood flour and pine foliage of coniferous trees or poplar foliage of hardwood species were selected and pulverized into 60-100 mesh minute powder after they were dried at $100-105^{\circ}C$ during 24 hours in the drying oven. The prepared particles as above were added to urea formaldehyde resin, urea-melamine copolymer resin and water soluble phenol formaldehyde resin in the ratio of 10, 20, 30 and 50%. After plywoods were processed by the above extending ratios, shear strength of extended plywoods were analyzed and discussed. The results obtained at this study were summarised as follows; 1. In the case of urea formaldehyde resin, both dry and wet shear strength of plywoods extended by wheat flour were shown the highest value. 2. Dry shear strength of urea-melamine copolymer resin was better than that of urea formaldehyde resin on the whole, while plywoods extended by wheat flour were shown excellent results. 3. Among 10% and 20% extensions of urea-melamine copolymer resin, the best results were shown by poplar leaves powder, wheat powder and wood flour. They had no significant difference statistically. 4. In the case of water soluble phenol formaldehyde resin, although dry shear strength of pine leaves powder was higher than that of wheat flour in the ratio of 10%, there was no significant difference between them in the ratio of 10 and 20%. 5. Among 20, 30 and 50% extensions of water soluble phenol formaldehyde resin, wet shear strength of wood flour and bark powder was higher than that of wheat flour. Wet shear strength of wood flour in the ratio of 10% was shown the same tendency as above.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제22권1호
• /
• pp.59-68
• /
• 2002

Chemical composition, mineral compounds, cellular constituents, digestibility for dry matter, total digestible nutrients, and tannin constituents were investigated to evaluate feed value for oak and pine browses to use effectively browses as forest by products. The results of this study were as follows : Crude protein was 6.00∼7.89% for oak browse and 5.15∼6.06% for pine browse sampled through July to October, It gradually decreased in oak browse but not in pine browse as the growth of tree was progressed stages. Crude fat content of oak and pine browse were 1.90∼2.68% and 6.30∼6.33%. Crude fiber content was 33.3∼35.2% for oak browse and 33.7∼34.8% for pine browse and they tended to increase according to the growth stage of trees. Crude ash was 3.13∼2.78% for oak browse and 2.11 ∼1.93% for pine browse, respectively. Ca, Mg, Mn and Cu content were higher in oak browse than those in pine browse, but P, K, Na, Fe, and Zn content were similar each other. Mineral contents were decreased as the growth of tree was progressed(P<.05). Acid detergent fiber content of pine and oak browse were 47.7∼52.0% and 46.1∼48.1%, and they increased as the tree grew. Neutral detergent fiber content of pine and oak browse were 64.1∼67.9% and 65.0∼66.5%. NDF content was increased according to the tree growth in pine browse but it was the same in oak browse(P<.05). in vitro digestibility of dry matter was 51.7∼48.4% for pine browse that decreased according to the tree growth(p<.05) and 53.0∼5l.4% for oak browse. Total digestible nutrients of oak browse was 50.9∼52.4% and that of pine browse was 47.7∼51.1% which decreased as the tree grew. Oak browse showed the same relative feeding value(RFV) as pine browse, and it decreased as the growth of tree was progressed(P<.05). Tannin contents was 2.96% for oak browse, 6.27% for pine browse. Tannin contents decreased when browses were dried.