• Journal of Korean Society of Forest Science
• /
• v.56 no.1
• /
• pp.111-115
• /
• 1982

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.67-76
• /
• 2019

With an increasing demand of timber production, the use of heavy machinery in forest management has significantly increased, causing the changes of soil physical properties and the decline of long-term site productivity. This study was conducted to evaluate the effects of logging slash (non-slash, slash $7.3kg/m^2$, and slash $11.5kg/m^2$) and machine passes(harvester 1 pass and forwarder 1 to 10 passes) on soil physical properties at 10 cm, 20 cm and 30 cm soil depths in harvester and forwarder operations and also to estimate the degree of soil surface disturbance. The results indicated that soil bulk density in the non-slash treatment site increased 10 %~29 % (25~139 % in soil penetration resistance) at all soil depths, compared with the slash treatment site(slash $11.5kg/m^2$). Therefore, the creation of a slash mat could be an effective way to minimize the changes of soil physical properties. In addition, 92 % of total soil compaction in slash treatment site was created within harvester 1 pass and forwarder 5 passes. In non-slash treatment site, 84 % of total soil compaction was created within first harvester and forwarder passes. The results showed that slash treatment was effective to reduce soil compaction caused by machine passes and also it is necessary to create designed forwarding trails for minimizing soil compaction area at timber harvesting sites.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.247-253
• /
• 2018

To replace the imported biomass and to effectively cope with growing RPS(Renewable Portfolio Standard) in power sector, the domestic forest biomass resources for wood pellets were estimated from the preceding research and annual growth rate of forest trees in this study. Assuming that 20% of the by-product from forest trees processing were used as raw material for wood pellet and the wood pellet production capacity was based on the average value derived from the above two methods, unused by-product and residues generated 1.99million tons in 2016, 2.28million tons in 2020 and 3.08million tons in 2030. If 20% of by-products(pebbles, sawdust, etc.) from roundwood processing were used as raw material for wood pellets, the wood pellet could be produced 2.74million tons/year in 2016, 2.95million tons/year in 2020, 3.98million tons/year in 2030. Therefore, total amounts of wood pellet would be increased to 2.74million tons/year in 2016, 3.14million tons/year in 2020, 4.23million tons/year in 2030 when it considered unused by-product and residues from wood processing as raw materials.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.217-232
• /
• 2021

This study calculated the productivity and cost of extraction and processing of logging residues by cut-to-length (CTL) and whole-tree (WT) harvesting methods. In addition, the comparative analysis of the characteristics of wood chip fuel to examine whether it was suitable for the fuel conditions of the energy facility. In the harvesting and processing system to produce the wood chips of logging residues the system productivity and cost of the CTL harvesting system were 1.6 Gwt/SMH and 89,865 won/Gwt, respectively. The productivity and cost of the WT harvesting system were 2.9 Gwt/SMH and 72,974 won/Gwt, respectively. The WT harvesting productivity increased 1.3times while harvesting cost decreased by 18.7% compared to the CTL harvesting system. The logging residues of wood chips were not suitable for CTL wood chips based on International Organization for Standardization (ISO 17225-4:2021) and South Korea standard (NIFoS, 2020), but the quality (A2, Second class) was improved through screening operation. The WT-unscreened wood chips conformed to NIFoS standard (second class) and did not conform to ISO but were improved through screening operation (Second class). In addition to the energy facility in plant A, all wood chips except CTL-unscreened wood chips were available through drying processing. The WT-unscreened wood chips were the lowest at 99,408 won/Gwt. Plants B, C, and D had higher moisture content than plant A, so WT-unscreened wood chips without drying processing were the lowest at 57,204 won/Gwt. Therefore, the production of logging residues should improve with operation methods that improve the quality of wood chips required for applying the variable biomass and energy facility.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2022

Stone has been used for various purposes, such as for building stones, megaliths, ornamental stones, hunting and grinding throughout history. The global stone production amounted to around 153 million tons in 2018 excluding quarry waste, up 0.8% on year. Of them, stone residues accounted for 71%. The worldwide stone trading decreased 1.5 million tons to 56.5 million tons in 2018. The average price of stone was 34.1 USD per square meter, down 2.5% from the previous year. It's down 7% when only considering trading between the world's top twelve exporters. But in the three leading countries, Italy, Greece and Brazil, the price saw a sharp increase. In 2018, stone imports and exports totaled 815 million square meters, raising over 20 billion USD of revenue. Imports were largely led by six countries: China, Italy, Turkey, India, Brazil, Spain and Portugal, from largest to smallest.) In terms of stone use per 1,000 population, it was 117 square meters in 2001, and it increased to 264 square meters in 2017 and 266 square meters in 2018. The volume more than doubled during the period, but it has been declining slightly in recent years. China, India, Saudi Arabia and Belgium were the only countries that the stone use per 1,000 population exceeded 1,000 square meters. The increase rate was steepest in China, India and the United States, from largest to smallest. The global stone production is likely to grow to 69.85 million tons by 2025, despite the global economic downturn.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.11a
• /
• pp.97-101
• /
• 1996

산림부산물인 수피에 의한 카드뮴 이온의 선택적 흡착 현상을 이용하여 인공폐수로부터 카드뮴이온의 제거를 시도하였다. 카드뮴 이온 선택성이 우수한 소나무와 상수리 나무의 수피를 이용한 효율적인 연속식 대량 수처리 시스템의 개발을 위한 기초 실험으로 카드뮴 이온흡착 등온선을 조사하였고, batch stirred reactor, airlift reactor, packed bed column 등 여러 접촉시스템에서의 카드뮴 이온의 제거 효율을 검토하였다. 카드뮴 흡착등온선은 두 수피 모두 Langmuir 형식으로 나타났으며 소나무 수피의 최대흡착용량은 약 7 mg/g, 상수리나무 수피의 경우에는 약 8 mg/g 정도로 나타났다. Batch stirred reactor를 이용한 시스템에서 초기농도 13 ppm의 카드뮴용액 100 $m\ell$ 을 수피 10 g 과 접촉시킨 결과 30분 이내에 95% 이상 제거되는 효율성을 보여주었다. Airlift reactor를 이용한 시스템에서는 수피 30 g 을 포기농도 10 ppm 카드뮴 용액 1 liter와 접촉시킨 결과 15분 이내에 93 % 이상 제거되었으며 4 cycle 반복 운전에서도 거의 같은 성능을 유지하였고 그 이상의 cycle에서는 점점 성능이 떨어짐을 보여주었다. Packed bed column을 이용한 시스템에서는 20 g의 수피를 충전시켰을 경우 초기농도 20 ppm에서 effluent 2.5 liter 까지는 95% 정도의 제거효율을 보여주었다.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.198-205
• /
• 2015

The aim of this study was to provide the basic design parameters for developing logging residue compression machines by investigating compressive deformation characteristics of different types of logging residues. To achieve these objectives, Pinus rigida, Pinus koraensis and Quercus mongolica were selected as specimens, and compression-deformation tests by UTM(universial testing machine) were conducted. The experimental dataset were used to set up the model based on the compression-deformation ratio in the form of exponential function. The results showed that stress coefficient in terms of mechanical properties of logging residues was decreased, whereas strain coefficient tended to be increased as the number of compression increased at target density of $350kg/m^3$ and $400kg/m^3$. The model presented that the required stress was decreased as the number of compression increased, and the stress growth rate was swelled compared to the change of the deformation rate. Therefore, it showed that proper initial compression force was a significant variable in order to achieve the target density of logging residue.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.1
• /
• pp.24-29
• /
• 2019

Background: Camellia sinensis L.(CS) is a perennial evergreen species of plant whose leaves are used to produce tea. In this plant species, the parts used are the leaves, sub-branch parts are thrown out. Methods and Results: Ethanol extract of sub-branch parts was used for isolation of major compounds by column chromatography. Structures were identified as caffeine (1), (-)-epicatechin (2) and (-)-epicatechin gallate (3) by interpretation of spectroscopic analysis, including $^1H$- and $^{13}C$-NMR. High-performance liquid chromatography (HPLC) method was used to compare the quantitative level of marker compounds in various extraction solvents of sub-branch parts of CS. The content of caffeine, (-)-epicatechin, and (-)-epicatechin gallate in 30% ethanol extract showed higher value with $3.28{\pm}0.57mg/g$, $5.53{\pm}0.88mg/g$, and $1.29{\pm}0.24mg/g$, respectively. Conclusions: These results indicated that not only leaves parts but also sub-branch, could be a good source for the functional material and pharmaceutical industry.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.21-22
• /
• 2019

In order to prevent global warming according to fossil fuel use, countries around the world are making efforts through the Kyoto Protocol and the Paris Climate Change Convention. In addition, in order to prepare for high oil prices, researches such as the development of various renewable energy are being conducted. At present, the domestic production rate of energy sources in Korea is low at 18.1%, and power plants using forest biomass are being constructed to meet the domestic situation where 63% of the land is a forest. In 2015, the global production of wood pellets, a raw material for wood-based biomass power generation, was 28 million tons, up 7.7% from 2014, and has increased tenfold over the last decade. This is a result of increased demand for biomass. Korea is also increasing every year. However, biomass fly ash, an industrial by-product generated by biomass energy generation, is now being disposed of entirely, and there is little research to utilize it. Therefore, this paper will use biomass fly ash, an industrial by-product, which is currently being discarded due to a lack of separate treatment methods, as an admixture concept to contribute to solving environmental problems, developing new admixtures, improving quality, and seeking recycling plans.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.103-110
• /
• 2010

Farming activity was the second cause of forest fire following the carelessness. In this study, 74 forest fires caused by farming activity and waste burning in 2009 was investigated for analyzing ignition patterns. The main cause to bring about forest fire was the farming waste burning as 25 cases, burning of farming waste matter after product and household waste burning were the second causes as 19 cases. Landcovers which transfer flame from ignition point to forest were fallow field graveyard, field fruit farm, field levee fallow field. The average distance between ignition point and forest sleeve was 19 m, and the maximum distance was 130 m. The probability of forest fire ignition was high in the 100 m buffer zone from the forest sleeve that is the prohibition rule of fire use for forest fire prevention at the forest fire season.