• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.188-194
• /
• 2023

This study aimed to derive the basic wood density, one of several carbon emission factors, for carbon accounting of bamboo forests in Korea. Bamboo is mainly distributed in Jeollanam-do and Gyeongsangnam-do provinces, and 101 sample trees were selected for each of the three species (Phyllostachys nigra var. henonis, P. bambusoides, and P. pubescens). The basic wood density derivation used the KS F 2098 method. The measurements showed that the basic wood density was 0.83 g/cm³ for P. nigra var. henonis, 0.81 g/cm³ for P. bambusoides, and 0.72 g/cm³ for P. pubescens. However, the bamboo distribution area in Korea is not very large, and P. pubescens grows in one area only. Therefore, the basic wood density that can be applied to bamboo was 0.79 g/cm³. Evaluation of the uncertainty of the extracted basic wood density showed a very low value of 1.61%, which confirmed the reliability of the basic wood density derived from this analysis. The basic wood density, biomass expansion factor, and root-to-shoot ratio were used to calculate the carbon storage capacity of one bamboo plant and expanded to calculate the capacity for a hectare of bamboo. Carbon storage and absorption of bamboo were calculated by applying a carbon-emission factor, such as the basic wood density. These study results are expected to contribute to the carbon-neutral policy and forest management direction in Korea.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.33-43
• /
• 2016

Drought tolerant species from 26 Korean native plants were selected using different physiological indicators. Arundinella hirta, Solanum carolinense and Carpesium divaricatum were withered after 8days of the stopping of irrigation. Plants except Kummerowia striata, Lespedeza cuneata and Ulmus parvifolia were withered in over 80% at 9-10days of the irrigation stopping. K. striata was withered after 10days, and L. cuneata and U. parvifolia were withered in over 90% after 11days of the stopping of irrigation. As stopping experiment of irrigation, A. hirta, S. carolinense, C. divaricatum, K. striata, L. cuneata and U. parvifolia were proved to be drought tolerant species. Among those plant species, transpiration rate of Cassia mimosoides var. nomame Makino was high as 0.042ml/㎠·4hr. However, unit transpiration rate of U. parvifolia and L. cuneata were 0.005 and 0.010ml/㎠·4hr, respectively. In testing of physiological indicators, leaf area and transpiration rate were different among plant species. Unit transpiration rate of U. parvifolia was lower compared with other plant species. L. cuneata, U. parvifolia, Kummerowia striata, Arundinella hirta and C. divaricatum were high in relative water content and low in relative water loss. As this results, L. cuneata and U. parvifolia. were identified as drought tolerant species.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.239-239
• /
• 2021

최근 기후변화로 인해 국지성 집중호우와 태풍의 발생빈도가 증가하고 있다. 특히 우리나라 국토는 전체면적 중 산지면적이 63%에 해당하여 산지에서 발생하는 산사태와 토석류에 취약한 실정이다. 이러한 피해를 사전에 예방·대비하기 위해 국내·외에서는 재해지도를 제작하여 관리하고 있지만 대부분의 재해지도는 격자형식으로 제작되어 있어 실무자들이 활용하기에는 다소 어려움이 있다. 따라서 본 연구에서는 산지재해에 취약한 강원도 강릉시 지방도를 대상으로 산림청에서 개발한 산사태위험지도와 토석류 위험지도를 중첩하여 복합재해지도를 제작하였다. 먼저 산사태위험지도에 유역의 개념을 도로에 적용하고서 지방도로를 200m 간격으로 분할하여 도로 중심으로 유역을 제작하였으며, 해당 유역에 산사태위험면적과 토석류위험면적 값을 이용하여 도로의 등급을 1등급(매우 위험) ~ 5등급(매우 안전)으로 분류하였다. 또한 복합재해지도 결과의 검증을 위해 SINMAP모형을 이용하여 오차율을 비교분석한 결과 15% 이내인 것으로로 나타났다. 본 연구는 복합재해에 대비 할 수 있는 유역의 개념을 적용한 재해지도를 제작하며 도로관리자의 숙련도에 상관없이 재해지도를 쉽게 이해하고 활용 할 수 있을 것으로 판단된다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.85-88
• /
• 2003

본조사지에서 평균축적이 200$m^3$/ha, 벌기령 80년 이면 연간 작업면적이 77ha에 이르고 5인1조의 5개조가 순수벌채작업에 필요하며. 연간 15.500㎥의 안정적인 목재가 공급될 수 있다. 또한 1회의 벌채 범위를 2ha미만으로 하고 벌기령을 80년으로 하게 되면 고유생태계를 보호하면서 안정적으로 노동력, 작업량, 용재제공의 확보가 가능하게 되고, 세계적으로 문제가 되고 있는 열대림경영의 모델림으로서 가능성이 제시되고 이는 도로 개설이 전재되어야한다.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.587-596
• /
• 2012

Verifying about eligibility of targeted site is necessary for execute Afforestation and Reforestation Clean Development Mechanism (A/R CDM) project which is followed by system of Kyoto protocol. The site have to be identified by which could not be in conformity with definition of forest. This study tried to propose a technology of classify for site selection of A/R CDM. We chose several parts of Yangpyeng as study area and applied LiDAR data and remotely sensed imagery for considering about tree height, degree of crown closure, and land area which 3 factors for identify forest. LiDAR data was used for offset the shortage of remotely sensed imagery that cannot perfectly determine the forest definition due to absence of 3-dimentional information, but can be obtained from LiDAR. Considering tree height, degree of crown closure, and land area simultaneously by moving window, classified fields to forest and non forest based on pixel size. As a result, 124.06 ha for suitable to doing plantation and approximately 357.02 ha are in negative. Technology that applied for analyzing will provide fundamental methodology not only site selection for A/R CDM, but will be utilized in other Kyoto protocol.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.233-239
• /
• 2014

This study was carried out to propose the criteria for the prediction of landslide occurrence through analysis the influence of each factor by using the quantification theory. The results obtained from this study are summarized as follows. From a stepwise regression analysis between the landslide area($m^2$) and environmental factors, the factors strongly affecting the landslide sediment($m^2$) were the Parents rock (igneous), cross slope(complex), coniferous forests (forest type) and slope gradient ($21{\sim}30^{\circ}$). According to the range, it was shown in order of Cross slope (0.2922), Parents rock (0.2691), Forest type (0.2631) and Slope gradient (0.2312). The range of prediction score of landslide occurrence has been distributed between score 0 and score 1.0556, the median value was score 0.5278. The prediction for class I was over 0.7818, for class II was 0.5279 to 0.7917, for class III 0.2694 to 0.5278 and for class IV was below 0.2693. The prediction on landslide occurrence appeared relatively high accuracy rate as 72% for class I and II. Therefore, this score table for landslide will be very useful for judgement of dangerous slope.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.437-445
• /
• 2013

This study was conducted to develop site index equations and to estimate productive areas of Quercus acutissima by ecoprovince in Korea using environmental factors. Using the large data set from both a digital forest site map and a climatic map, a total of 48 environmental factors including 19 climatic variables were regressed on site index to develop site index equations. Four to six environmental factors for Quercus acutissima by ecoprovince were selected as independent variables in the final site index equations. The result showed that the coefficients of determination for site index equations were ranged from 0.30 to 0.41, which seem to be relatively low but good enough for the estimation of forest stand productivity. The site index equations developed in this study were also verified by three evaluation statistics such as the estimation bias of model, precision of model, and mean square error of measurement. According to the evaluation statistics, it was found that the site index equations fitted well to the test data sets with relatively low bias and variation. As a result, it was concluded that the site index equations were well capable of estimating site quality. Based on the site index equations of Quercus acutissima by ecoprovince, the productive areas by ecoprovince were estimated by applying GIS technique to the digital forest site map and climate map. In addition, the distribution of productive areas by ecoprovince was illustrated by using GIS technique.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.337-345
• /
• 2004

The objective of this study was to monitor vegetation recovery process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored in 1997, 1999, 2001, and 2003. Vegetation development pattern during last ten years (1994-2003) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clear-cut, Styrax japonica and Lindera erythrocarpa as of sprout tree and Aralia elata as of seedling were dominant species in the sixth year after clear-cut, and Lindera erythrocarpa, Styrax japonica and Quercus serrata were dominant species from the eighth year to the tenth year after clear-cut. Species diversity index of harvested forest interior was decreased at the southwestern slope while it was increased in the northeastern slope till 6th year and decreased after the 8th year). According to DBH distribution pattern, No. of individuals of Quercus serrata, Styrax japonica and Lindera erythrocarpa showed high frequency in the southwestern slope, and Acer pseudosieboldianum, Styrax obassia, Magnolia sieboldii, Lindera erythrocarpa, and Aralia elata showed good growth in the northeastern slope. There was a difference between slopes in Basal area. It was decreased at the southwestern slopes during the 10th year continuously and it was increased the sixth year however, was decreased after the eighth year at the northeastern slope.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.65-81
• /
• 2019

This study analyzed the relationship of land cover type, urban temperature in Gimhae city, Gyeongsangnam-do, South Korea. Date were used for land cover map, MODIS LST, and detailed temperature data on the Korean Peninsula based on RCP between 2000 and 2010. The correlation between urban area and surface temperature was 0.417, 0.512 for agricultural area and -0.607 for forest area. The correlation between surface temperature and air temperature was 0.301. The relationship with air temperature was analyzed as 0.275 for urban area, agriculture area 0.226, forest area 0.350. Urban and agricultural areas showed increased surface and air temperature as the area increased, while forest areas showed opposite improvements. In structural equation models, urban and agricultural areas had direct effects on the rise of surface temperature, whle forest areas had direct effects on the reduction of air temperature. In the future, it is necessary to use measured temperature data near the surface to understand the relationship between surface temperature and temperature according to the changes in spatial characteristics, which will prepare measures for urban heat island mitigation at the level of urban and environmental planning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1715-1724
• /
• 2015

This study assessed the long term structure of forest age groups and the possibility of a domestic wood supply based on the wood industry buildup master plan. Wood is assumed to be supplied by main cutting, renewal, cutting damaged trees and thinning. The cohort equation was applied to identify the dynamic changes in forest area according to the age groups. The sixth age group, which composed of only 7.7% in 2010, is expected to comprise 73% of the total production land. The area distributions of the other age groups are expected to be between 5.3 - 5.6%. Consequently, the production volume from main cutting accounts for approximately 93 - 95% of the total production. The production volume from thinning, which depends on the area of the second and third age groups, will be decreased gradually. When the volume of domestic timber supply was compared with the timber demand from a previous study, the self-sufficiency of timber demand will be approximately 83% in 2050.