• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.109-116
• /
• 2022

Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.185-196
• /
• 2022

In this study, carbon fiber and coated glass fiber are applied to warp and weft fiber in order to reduce the amount of carbon fiber used in carbon fiber fabrics, which are often used for reinforcement of building structures. A low-cost thermoplastic resin was coated on glass fibers to prepare a shape-stabilizing glass fiber. A unidirectional carbon fiber sheet was manufactured using the prepared coated glass fiber and carbon fiber. In order to identify whether it can be used for reinforcing architectural and civil structures, it was attached to a concrete specimen and its mechanical properties were analyzed. The optimum manufacturing conditions for the coated glass fiber were 0.3 mm in diameter of the coating nozzle, the coating temperature was 190 ℃, and the coating speed was 0.3 m/s. 14 mm was optimal for the weft spacing of the coated glass fiber. The flexural strength of the concrete reinforced with the manufactured unidirectional carbon fiber sheet was slightly lower than that of the concrete reinforced with carbon fiber fabric, but it was confirmed that the reinforcement effect was better when the amount of carbon fiber was considered.

• Textile Coloration and Finishing
• /
• v.35 no.1
• /
• pp.20-28
• /
• 2023

In this study, TPU resin for coating was prepared by varying the mixing ratio of antistatic TPU and recycled TPU to manufacture permanent antistatic materials. The coated yarn was prepared by coating on the nylon yarn, and then the thermal, rheological, mechanical properties and antistatic properties were analyzed. In addition, antistatic properties and durability were confirmed after manufacturing UD fabrics using coated yarns. The mixing ratio of antistatic TPU and recycled TPU was most appropriate at 4:6, and the antistatic property had a surface resistance of 2.20 × 10⁹ Ω and a static charge of 398 V. In the coating process, the coating speed was most appropriate at 0.21 m/s, and the surface resistance of the UD fabric manufactured with the coated yarn manufactured under this condition was 6.80 × 10⁹ Ω and the static charge was 484 V. The UD fabric had a surface resistance of 7.21 × 10⁹ Ω and a static charge of 517 V after washing 10 times, and it was confirmed that the permanent antistatic property was excellent.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.75-75
• /
• 2001

유리화 동결법은 동결중 ice crystal의 형성이 이루어지지 않으므로 난자의 동결보존을 위한 유용한 동결방법이다. 이전의 연구에서 마우스의 난자를 ethylene glycol과 electron microscope grid를 이용한 유리화 동결법으로 동결 융해한 결과 기존의 slow freezing 방법에서보다 높은 생존율과 배발달율이 나타남을 관찰하였다. 그러나 동물과 인간 난자를 이용한 연구를 통하여 난자의 경우 동결 융해후 염색체에 부착되어 있는 미세소관인 방추사가 온도의 변화에 매우 민감하여 염색체 이상성이 증가되는 것이 보고되었다. 이에 본 연구에서는 성숙난자를 유리화동결법에 의해 동결 융해후 난자의 염색체와 방추사의 이상성이 증가되는지 알아보고자 본 실험을 수행하였다. ICR mouse의 성숙란을 채취하여 연구목적에 따라 fresh한 대조군과 동결음해 시킨 실험군으로 분류하였다. 동결방법은 난자를 1.5 M ethylene glycol (EG)에 2분 30초간 노출 시킨후 5.5 M EG와 1M sucrose가 첨가된 동결액에 20초간 노출시킨 후 Grid에 난자를 부착시킨 후 직접 액체질소에 침지하여 동결하였다. 동결후 난자는 5단계로 융해를 실시한 후 생존된 난자는 tubulin 항체를 이용한 immunostaining 방법으로 방추사의 이상성을 관찰하였고, 염색체는 난자를 고정 후 10% Giemza로 염색 후 염색체의 수적인 이상성을 관찰하였다. 염색체 분석결과 염색체 이상 빈도는 대조군의 경우 19.6%, 동결융해군은 32.8%로 관찰되었다. 또 방추사의 이상빈도는 대조군의 경우 20.2%, 동결 융해군은 32.3%로 관찰되어 동결 융해후의 난자에서 염색체와 방추사의 이상 빈도가 증가됨이 관찰되었다.찰되었다. 배아이식후 대조군과 실험군에서 각각 2 마리가 임신이되어 정상적인 산자를 분만하였다. 따라서 항동해제에 taxol의 첨가는 동결 융해후의 난자의 배발달율을 증진시킬 수 있었다..8%로 나타나 난할율 및 배반포 발생율에 있어서 융합조건에 따라 큰 차이는 없었으나 1.9㎸/cm, 30$\mu\textrm{s}$ 2회의 조건이 다른 조건들에 비하여 유의적으로 낮았다. 따라서, 체세포와 수핵란 세포질간의 융합율과 배반포 발생에 미치는 영향은 전압보다는 시간에 더 크게 받음을 알 수 있었으며, 이와 같은 결과에서 융합시 시간을 오래 주는 것보다 전압을 높이는 것이 수핵난자의 세포질에 상해를 줄이고 이후 배반포 발생에 유리할 것으로 사료되었다.면에서도 더욱 더 활발할 것으로 기대된다. 배란후 72시간째에 초음파진단기를 이용하여 난소의 난포발달을 조사한 결과 , 대조구와 bFF처리구에 비해 AI처리구에서 발달난포가 유의적으로 많은 것을 확인하였다. 이상과 같은 결과로, Anti-inhibin serum은 한우 자체에서 분비하는 Inhibin을 특이하게 억제하여 Inhibin에 의해 억제되는 FSH분비가 촉진됨으로써 난포발달과 estrogen의 농도가 촉진되는 것으로 사료되어 anti-inhibin serum이 한우의 과배란유기 효과가 있는 것으로 사료된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며

• Journal of Acupuncture Research
• /
• v.24 no.2
• /
• pp.1-14
• /
• 2007

목적 : 이 연구는 Vipera lebetina turanica의 사독약침파(蛇毒藥鍼波)(Snake venom toxin, SVT)이 in vitro에서 $NF-{\kappa}B$의 활성억제와 apoptosis 관련 단백질의 발현 조절을 통하여 세포자멸사(Apoptosis)를 유도하는지 in vivo에서 또한 전립선 암세포주인 PC-3 세포의 성장을 억제하는지 살펴보고자 하였다. 방법 : SVT를 처리한 후 PC-3의 성장억제를 관찰하기 위해 WST-1 assay, CCK-8 assay를 시행하였고，Apoptosis evaluation에는 DAPI, TUNEL staining assay를 시행하였으며，Apoptosis regulatory proteins의 변화 관찰에는 western blot analysis를 시행하였고，apoptosis와 연관된 $NF-{\kappa}B$의 활성 변화를 관찰하기 위해 EMSA시행하였으며，SVT의 핵내이동을 관찰하기 위해 Immunofluorescence Staining, Confocal immunocytochemistry를 시행하였으며，전립암세포의 종양형성에는 흉선을 제거한 쥐에 Tumorigenecity study를 시행하였다. 결과 : PC-3 세포에 SVT를 처리한 후，전립선 암세포의 성장，Apoptosis의 유발，Apoptosis관련 단백질의 발현，$NF-{\kappa}B$의 활성，SVT의 PC-3세포 핵내 이동여부 및 흉선제거 후 PC-3 세포를 이식한 쥐의 종양형성과정에 미치는 영향을 관찰하여 다음과 같은 결과를 얻었다. 1. PC-3 세포에서 SVT를 처리한 후 세포성장이 억제되고，세포자멸사가 유도되며，조절인자인 p53, caspase-3, -9는 증가되었고，Bcl-2는 감소되었다. 2. PC-3 세포에서 SVT를 처리한 후 $NF-{\kappa}B$의 활성이 유의하게 감소되었다. 3. DAPI로 염색된 상태에서 SVT가 PC-3 세포의 핵내로 이통되는 것이 관찰되었다. 4. 흉선제거 후 전립선 암세포주를 이식한 쥐에서 SVT를 피내로 주입한 결과 전립선암의 크기와 무게가 유의하게 감소하였다. 결론 : 이상의 결과는 SVT가 $NF-{\kappa}B$의 활성 억제를 통하여 인간 전립선암세포주인 PC-3의 세포자멸사를 유발함으로써 증식억제 효과가 있음을 입증한 것이며，이를 재확인한 생체 연구에서의 긍정적인 결과는 향후 SVT의 전립선암의 예방과 치료에 대한 효과적인 치료제 개발에 초석이 될 것으로 기대된다.

• Clinical and Experimental Pediatrics
• /
• v.46 no.10
• /
• pp.989-995
• /
• 2003

Purpose : Dexamethasone is frequently administered to prevent or treat chronic lung disease in human neonates who are also prone to hypoxic-ischemic(HI) insults. Recently, meta-analysis of the follow-up studies reveals a significantly increased odd ratio for the occurrence of cerebral palsy or an abnormal neurologic outcome, and there is conflicting evidence regarding the impact of dexamethasone exposure on HI brain injury. This study was conducted to explore the effect of post-HI dexamethasone administration on neuronal injury in neonatal rats. Methods : HI was produced in seven-day-old rats by right carotid artery ligation followed by two hours of 8% oxygen exposure. At the end of HI, the animals were injected intraperitoneally either with dexamethasone(0.5 mg/kg) or saline. Neuronal injury was assessed seven days after the HI by the area of infarction, TUNEL reactivity, Bcl-2 and Bax expression in brain. Results : Post-insult dexamethasone administration resulted in reduction of weight gain and a higher mortality rate during seven days after HI. Dexamethasone treatment revealed no effect on the size of brain infarction induced by HI. Bax protein expression increased in dexamethasone treated brain but Bcl-2 protein expression and TUNEL reactivity revealed no significant differences between dexamethasone treated and non treated brain. Increased Bax protein expression suggest upregulation of the apoptosis by dexamethasone. Conclusion : The result suggests the adverse role of Post-HI administration of dexamethasone in neonatal HI.

• Journal of Oral Medicine and Pain
• /
• v.36 no.1
• /
• pp.11-20
• /
• 2011

Valproic acid (VPA) is a well-known anticonvulsive agent and has been used in the treatment of epilepsy for almost 30 years. VPA emerged in 1997 as an antineoplastic agent. And it is known that antitmor activity of VPA is associated with its targeted at histone deacetylases. 17AAG, Inhibition of HSP90 leads to the proteasome degradation of the HSP90 client proteins, such as Akt, Raf/Ras, Erk, VEGF, cyclin D and p53, and causes potent antitumor activity. It is reported that 17AAG-induced HSP90 inhibition results in prevention of cell proliferation and induction of apoptosis in several types of cancer. This study was undertaken to investigate the synergistic apoptotic effect of co-treatment with the histone deacetylases inhibitor, VPA and the HSP90 inhibitor, 17AAG on human osteosarcoma (HOS) cells. Cell viability was evaluated by trypan-blue exclusion. Induction and augmentation of apoptosis were confirmed by Hoechst staining, flow cytometry (DNA hypoploidy and MMP change), Westen blot analysis and immunofluorescent staining. In this study, HOS cells co-treated with VPA and 17AAG showed several lines of apoptotic manifestation such as nuclear condensations, the reduction of MMP, the decrease of DNA content, the release of cytochrome c into cytosol, the translocation of AIF onto nuclei, and activation of caspase-3, caspase-7 and PARP whereas each single treated HOS cells did not. Although the single treatment of 1 mM VPA or 0.5 ${\mu}M$ 17AAG for 48 h did not induce apoptosis, the co-treatment with them induced prominently apoptosis. Therefore our data in this study provide the possibility that combination therapy with VPA and 17AAG could be considered as a novel therapeutic strategy for human osteosarcoma.

• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.1
• /
• pp.61-67
• /
• 2008

Objective: This study was attempted to look at the effect of dexamethasone on the luteolysis of corpus luteum in rats by immunohistochemical study. Methods: Counting with an optical microscope was conducted to make a comparison on difference in luteolysis and penetration of macrophage into three groups: control group of 30 female rats at 8 weeks of age, dexamethasone 0.1 mg administered group, and dexamethasone 1mg administered group. Results: As a result of TUNEL immunostaining, the percentage of luteolysis was significantly reduced in both dexamethasone 0.1 mg administered group and 1 mg administered group, and after ED1 immunostaining, macrophage invasion was reduced in dexamethasone 1 mg administered group. As a consequence of ED1 immunostaining, the immune response of macrophage was much decreased in dexamethasone 1 mg administered group than control group. Conclusion: Dexamethasone works on luteal cell, so it can suppress apoptosis. It can suppress luteolysis by suppression macrophage invasion into corpus luteum or suppress macrophage activation in corpus luteum.

• Journal of Veterinary Clinics
• /
• v.27 no.3
• /
• pp.240-245
• /
• 2010

Osteonecrosis of the femoral head is an idiopathic and progressive disease. It was reported that several animal models have been used for the research of osteonecrosis. However, no standardized animal model for the study of osteonecrosis has been developed to date. This study was conducted to compare the degree of osteonecrosis of three surgically induced osteonecrosis models in rats. Twenty Sprague-Dawley rats (24 weeks old, male) were divided into three experimental groups and a control group, five heads each. Three groups were surgically induced into osteonecrosis; the ligamentum teres were cut and the periosteum of the femoral neck was stripped (Group S), the steel wire was ligated to the neck of the femoral head (Group W), and the femoral neck was tied up with a wire in the same way as in the W group, and burned by attaching the electrode tip to the wire and then the wire was removed (Group B). After two weeks, rats were sacrificed and the femoral head and neck were collected. Histological findings were evaluated with H/E stains, Safranin-O and TUNEL for osteonecrotic lesions in the bones and cartilages of the femoral head. Osteonecrosis was induced successfully in all groups (Group S, W and B) in two weeks, a short period of time. Significant necrotic changes of the cartilage were detected only in Group B. In the modified cautery model in particular, the method of removing the wire after cautery was completed in the experimental model of osteonecrosis more efficiently than any other method.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.9-18
• /
• 2020

In this study, we conducted alkali hydrolysis on sea-island type PET ultramicrofiber tricot fabric and dyeing according to the various conditions with black disperse dye. Herein, we evaluated the weight loss rate and tensile strength according to the NaOH contents. The optimal alkali hydrolysis treatment conditions were set to 25 %omf NaOH with a treatment time of 60 min at 110 ℃, and average weight loss rate of the PET ultramicrofiber tricot fabric is about 23 %. The dyeing conditions were investigated with different dyeing temperatures(95-135 ℃), dyeing time(20-60 min), dye contents(2-10 %omf), dispersant contents(1-9 g/ℓ), pH buffer solution contents(1-9 g/ℓ), UV-absorbent contents(5-25 %omf) and reduction cleaning process conditions for black color. We obtained the optimum conditions of the dyeing with the dye contents of 8 %omf, the dispersant contents of 1 g/ℓ, the pH buffer solution contents of 1 g/ℓ, the UV-absorbent contents of 10 %omf, the dyeing temperature of 135 ℃ and the dyeing time of 40 min. The light colorfastness of dyed ultramicrofiber PET tricot fabric was good to excellent in the range of 4 to 5.