• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.57-66
• /
• 2007

Weaving is defined as the crossing of two or more traffic streams traveling in the same general direction along a significant length of highway without the aid of traffic control devices. Compared with other freeway sections, perturbation is easy to happen at weaving section. Because there are a lot of lane-changing maneuvers at the weaving section, traffic is subject to turbulence in excess of that normally presents on freeway basic section. This turbulence causes operational problems and its impact must be considered. The purpose of this paper is to perform a basic study on flow characteristics by lane, which can be achieved through analyzing breakdown phenomenon in the microscopic approach. The study made use of data derived from the aerial photography for the microscopic analysis. This research produced the 30-second interval data such as flows, speeds, and densities for the macroscopic analysis and derived the vehicular data to draw time-space diagram for the microscopic analysis. The paper analyzed the traffic characteristics using flows, speeds and densities variation and investigated the conditions of breakdown occurrence with the time-space diagrams. The breakdown phenomenon was identified at weaving section and the propagation from free flow to synchronized flow was observed in this study. In the future, the findings help develop the traffic operational algorithm to manage the traffic congestion under ubiquitous circumstance since the conditions of breakdown Phenomenon can be understood more.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.342-349
• /
• 2001

This study was carried out to classify and evaluate the land cover map using Landsat TM data in Pyeongtaeg City. DGPS data, aerial photography, topographical map were used for selection the training sets and accuracy assessment. The overall accuracy and Kappa coefficient of the land cover classification map(using supervised classification with 13 classes) with Landsat TM data(16 June. 1997) were respectively, 86.8%, 85.4%, but the user's accuracy of urban/village and vinyl-house was below 60%, and the producer's accuracy of read and vinyl-house below 70%. Maybe it was caused the spectral reflectance characteristics, heterogeneity and small distribution area on the artificial things such as urban/village, vinyl_house and road, etc. And then, the agricultural land cover classification system using remote sensing data in Korea was to classify level I and II. Level I consisted of 5 classes such as agricultural land, forest land, water, barren land, urban and built-up land.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.2
• /
• pp.65-78
• /
• 2013

The following experiment was designed to test the students' involvement in the interactive activities and objectives of the relevant chapters in the newly revised curriculum of 2007. The experiment was carried out with the purpose of understanding the level of participation of the Grade 9 students who have successfully completed the Grade 8 "Choice of Food and Diet" and "Table Manners and Dining Etiquette" courses with classified materials such as tables/diagrams/pictures, reading, and activity resources from Technology Home Economics textbooks. The chapters "Choice of Food and Diet" and "Food Preparation and Etiquette" generally emphasize the practical and experiential part of domestic life through using various activity resources; while the tables/diagrams/pictures and reading materials do not provide the students with first-hand experience, they support the students' learning by explaining the basic knowledge required for doing the activities and solving various problems. Within the main training courses, the objectives which the students achieved the highest marks were(in a descending order) "Table Manners and Dining Etiquette" (3.24), "Checking Nutrition Labels, Food Expiration Date, Country of Origin When Buying Food" (3.18), Additionally "Making Food" and "Planning a Healthy, Balanced Diet" hardly met the goals, the result of which shows clear relations to the well achieved objectives from the list of in-class activities that students directly participated in. Therefore, in order to increase the students' interest in the Food and Diet section of Technology Home Economics textbooks, it is recommended to encourage the students to actively engage in the class activities by developing various learning resources and teacher education/pedagogical materials, rather than following the conventional lecture-based teaching methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.161-168
• /
• 2010

This study aims to propose a method that shall rapidly acquire 3D information of the fast and frequently changing city areas by using the images taken by the UAV photogrammetric method, and to develop the process of the acquired data. For this study's proposed UAV photogrammetric method, low-cost UAV and non-metric digital camera were used. The elements of interior orientation were acquired through camera calibration. The artificial 3D model of the artificial structures was constructed using the image data photographed at the target area and the results of the ground control point survey. The digital surface model was created for areas that were changed due to a number of civil works. This study also analyzes the proposed method's application possibility by comparing a 1/1,000 scale digital map and the results of the ground control point survey. Through the above studies, the possibilities of constructing a 3D virtual city model renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.151-160
• /
• 1994

Recently, terrestrial photogrammetry has been applied effectively to data acquisition in GIS and to monitoring precise machinery for simulation test. Because 3-D coordinates of many object points can be quickly measured with constant accuracy and easy modeling by this method. In this study, the composition concerned with multi-camera system which simultaneously analyzes structure from multi-station using various cameras was developed. The errors of results were analyzed to investigate the accuracy of the system, error of unknown points and control points, convergent and strip adjustment for optimal network design also. As results of this study, the efficiency of multi-camera system developed here was proved through application to monitoring the entire area of the precise model ship. We could also acquire 3-dimensional coordinates with good accuracy by arranging pass points. Therefore, possibility of measurement of instantaneous deformation as well as precision analysis of structures can be suggested.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.23-32
• /
• 2016

This study evaluates landslide susceptibility using statistical analysis by SVM (support vector machine) and the illite index of clay minerals extracted from ASTER(advanced spaceborne thermal emission and reflection radiometer) imagery which can be use to create mineralogical mapping. Landslide locations in the study area were identified from aerial photographs and field surveys. A GIS spatial database was compiled containing topographic maps (slope, aspect, curvature, distance to stream, and distance to road), maps of soil properties (thickness, material, topography, and drainage), maps of timber properties (diameter, age, and density), and an ASTER satellite imagery (illite index). The landslide susceptibility map was constructed through factor correlation using SVM to analyze the spatial database. Comparison of area under the curve values showed that using the illite index model provided landslide susceptibility maps that were 76.46% accurate, which compared favorably with 74.09% accuracy achieved without them.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.151-158
• /
• 1992

Topographic mapping from economic SPOT stereo imagery than aerial photographs has become possible. Many of authors have studied the possibility of base map revisions and the accuracy of results. They have concluded that the SPOT image is suitable for 1/50,000 to 1/100,000 topographic map. For topographic map, orthophoto and DTM generation from SPOT imagery, accurate exterior orientation parameters are needed. But since the geometric characteristic of SPOT image is dynamic linear array imagery, the conventional bundle adjustment for photogrammetry can not be directly applied. Reliability is the ability to detect gross error, which is called the internal reliability, and the effect of non-detectable gross error on the results of exterior orientation, which is called the external reliability. This paper shows how the reliability of SPOT imagery depends on the different coordinate systems, presentations of coordinate for flight direction, orders of exterior orientation parameters and distribution of control points, and thus analyses the theoretical reliability of the exterior orientation, which can provide a basis for the planning of SPOT projects.

• Journal of architectural history
• /
• v.21 no.3
• /
• pp.93-108
• /
• 2012

This study is one that estimates the architectural composition as well as the location of guest house of Haemi Eupseong on the basis of the analysis of modern and contemporary data related to Haemi Eupseong. It is significant that this study has presented an opinion that can become a practical basis for the historical research of the prototype of Haemi Eupseong of the late Chosun Dynasty through the analysis of modern and contemporary data that had been unsatisfactory among the fruition of studies conducted in relation to Haemi Eupseong. The outcomes achieved by this study are as follows. Firstly, it was verified that the guest house of Haemi Eupseong that has been restored is one that has different architectural composition than the prototype of the late Chosun Dynasty and is restored in a different location. Secondly, in respect of architectural composition of guest house found by the analysis of the picture, it was confirmed that the government office has one step higher than the double-wing house in the form of the roof. Thirdly, the location of the guest house of Haemi Eupseong of the late Chosun Dynasty is judged to be the periphery area where the current restored guest house is located, which is where the teachers' building of Haemi elementary school was located. Fourthly, the prospect of the guest house of Haemi Eupseong is decided to be similar direction to the current restored guest house with the greatest possibility of having the same direction with the arrangement of teachers' building of Haemi Eupseong elementary school.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.91-97
• /
• 2004

As for the former analogue method of photogrammetry, We have obtained final digital drawing by creating the stereo model from overlapped images through orientation process using plotting instrument and processing restitution procedure. However, digital photogrammetry batch processes such using small computer system thus We make an attempt automatization of the procedures. And without the production of stereo model, We could obtain 3D digital data through analysis method. Therefore, an objective of this study was to implement a surveying system that could 3D surveying positions using the digital image to reduce limitations of control point surveying and photographing conditions more efficiently to produce digital drawing. By the result, photogrammetry can practice and make out digital drawing to a computer by digital camera of a comparative low-cost. Small scale area can become practical use to drawing production etc. for facilities management because area can make out digital drawing economically than general surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.177-185
• /
• 1998

There is an increasing request for 3D data and outlines on building for urban planning and design. This paper describes an approach to extract building using Digital Surface Models(DSM) and stereo pairs of aerial images. DSM contain informations not only about the topographic surface like Digital Elevation Models(DEM), but also about buildings and other objects higher than the surrounding topographic surface, e.g. tees. We therefore describe our approach consisting of two step procedures. The first step of the approach is to generate DSM by stereo matching using Maximum Likelihood Estimation and Dynamic Programming. The proposed stereo matching is using the cost function for finding the disparity between the left and right image, and the Dynamic Programming for solving the stereo matching problem. The second step is to detect building outlines using the DSM and the edge informations extracted from a digital aerial image by Sobel Operator. The overlay analysis of the DSM and the edge information by Sobel Operator was efficient to detect building outlines.