• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1402-1408
• /
• 2013

Document managements are very important in internal communication for good performance on projects. In case of small scale projects, the document management criteria often have very different from each of the cooperation departments and changes of document structure of work process are frequent over a project period. In this thesis, we propose a monitoring system of document management which is based on P2P(Peer-to-Peer). The proposed monitoring system of document management, which is based on P2P, makes up for time limits and a specific work process in small scale project groups. It can be managed focusing on work process and can monitor effectively the status of creations, sharing and distributions of documents. We can be installed at a low cost by using P2P in a small scale project.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.669-680
• /
• 2008

There are various studies about AOP(Aspect-Oriented Programming) which modularizes cross-cutting concerns like logging and security effectively. But, we need to utilize techniques which specify the information of aspects modularizing cross-cutting concerns and detailed join information between aspects and targets. We propose a specification technique for aspects which focuses on clarifying the join information between aspects and targets. The technique includes the activities of specifying aspects, defining priority, specifying join information, and specifying pointcuts. We describe the join matrix which represents relationships of aspects and targets and the pointcut specification which is made by analyzing the commonality of join points. The proposed specification technique supports detailed information of the aspects and the join information between aspects and targets so that we can use detailed information to implement aspects.

• Korean Institute of Interior Design Journal
• /
• v.15 no.1 s.54
• /
• pp.12-19
• /
• 2006

As an exhibition designer, clothing and furniture designer, and woman architect in Germany during the 1920s and'1930s Lilly Reich was an important pioneer of modern design and one of the most respected practitioners. In spite of that she has been until recently known primarily for the work she produced in association with the architect Ludwig Mies van der Rohe, because his fame has overshadowed her own contribution. For the first time only after her own works have been presented by MoMA in 1996, her artistic world could begin to be illuminated. This study discusses not only her collaboration with Mies van der Rohe, but also her own work as an individual artist. The aim of this study is concentrated on two aspects, which have been unexplored in the history of architecture and interior design. One of them is related to her effort, the essential elements and principles of the exhibition design disciplinarily to stand and through this the methodological basis of exhibition design to found. Another aspect is the contribution to the functionalist architecture by keeping in harmony the standardization and the individualism. This study is purposed to re-actualize the interior-architectural ideas of Lilly Reich into the present context through the consideration on the collaborations with Mies van der Rohe and her own works and to illuminate her complementary efforts to the functionalist architecture.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.43-48
• /
• 2000

중간 및 하부 대규권의 열적 상태에 대한 결과들의 상대적인 정확성을 평가하기 위하여 대기대순환 모델의 재분석(1980-93년) 그리고 세 종류의 위성관측 자료들(1980-97년)을 태평양, 한반도 부근에 대한 시.공간 분석으로 상호 비교하였다. 중간 대류권 온도를 반영하는 위성자료는 본 연구에서 유도된 Microwave Sounding Unit (MSU) 채널2 직하점 밝기온도(MSU2)와 Spencer and Christy(1992a)가 전체 주사자료를 사용하여 유도된 채널2 밝기 온도(SC2)이고, 하부 대류권 온도를 반영하는 위성자료는 Spencer and Christy(1992a)가 유도한 것이다(SC2R). 또한, 모델 자료는 ECMWF 재분석 온도이며, 위성관측 자료와의 비교를 위하여 재구성되었다. 한편, 각 위.경도 격자에서 위성관측과 모델 재분석의 월평균 값들의 상관도 전구적으로 조사하였다. 세 종류의 관측 자료들 간의 상관은 중.고위도에서 높았으나(r$\geq$0.9), 저위도 그리고 대류가 활발한 열대 서태평양 및 콩고강 부근에서 낮았다(r~0.65). 특히 SC2R에 대한 다른 자료의 상관이 상대적으로 낮았다. 이는 하부 대류권의 열적 상태를 반영하는 SC2R이 수적 및 지표방출의 영향으로 잡음을 크게 내포하기 때문인 것으로 추정되었다. 관측들과 모델 온도에 대한 월평균과 아노말리 값의 분석에서 시.공간 변동은 대체로 유사하였다. 관측 및 모델 자료는 열대 태평양 이외의 지역에 대한 월평균 값 모드1에서 연주기를 보였으나, 열대 태평양의 경우 모드2에서 보였다. 열대 태평양의 MSU2 모드1은 Walker 순환에 의한 동.서 대비를 보인 반면, 다른 위성관측과 모델 자료에서는 이러한 형태가 현저하지 않았다. 이 지역의 아노말리 값 모드2에서 위성관측들은 엘리뇨 기간에 적도를 중심으로 열대 동태평양 부근에서 아령모양의 대칭 형태를 보였으나 모델 결과에서는 이러한 특징이 약하였다. 관측과 모델 모두는 열대 태평양에 대한 아노말리 값의 모드 1,2에서 엘니뇨와 라니냐에 의한 경년변동을 뚜렷하게 보였다.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.547-557
• /
• 2014

This paper presents a method for designing circular template used in similarity measurement for image registration. Circular template has translation and rotation invariant property, which results in correct matching of control points for image registration under the condition of translation and rotation between reference and sensed images. Circular template consisting of the pixels located on the multiple circumferences of the circles whose radii vary from zero to a certain distance, is converted to two-dimensional Discrete Polar Coordinate Matrix (DPCM), whose elements are the pixels of the circular template. For sensed image, the same type of circular template and DPCM are created by rotating the circular template repeatedly by a certain degree in the range between 0 and 360 degrees and then similarity is calculated using mutual information of the two DPCMs. The best match is determined when the mutual information for each rotation angle at each pixel in search area is maximum. The proposed algorithm was tested using KOMPSAT-2 images acquired at two different times and the results indicate high accurate matching performance under image rotation.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.4
• /
• pp.561-570
• /
• 2008

The primary object of the paper is to identify the compression forces and inelastic failure behavior using steel plate-concrete structures. The compression tests were carried out for the three types of B/tratios by 25, 33 and 50. The tests proved that the compressive strength of the SC structures can be estimated by the summation of strengths both of the steel plate and concrete. The buckling of the steel plates had been occurring at the plates between studs. The empirical estimation of compressive strength for unstiffened SC structures under compressive loadings was suggested. The buckling behavior was also compared with the results of the finite element analysis.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.147-158
• /
• 2011

The purpose of this research was to analyze the connections of the seismic-performance values for domestic-performance-based designs. Basic research on the performance design method has been increasing of late, along with performance-based organization investigations. These investigations concern the performance level state of steel structure buildings. According to the performance limit state, seismic-performance values should be presented as appropriate steel structure engineering amounts. The first step, based on the full-scale steel structure experiments, involves researching on the making of a basic document. The moment-rotation angle relationship results of the experiment on the moment-frame connection were used to assort the functional and undamaged limits, which were assumed to be less than the yield moment. Moreover, the repairable and safety limits, which were assumed to exist between the yield and maximum moments, were assorted by investigating the accumulated plastic deformation ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.156-156
• /
• 2013

대기압 저온 플라즈마는 간단한 구조 및 제작, 쉬운 조작성, 낮은 온도 특성, 높은 화학적 반응성과 같은 많은 장점에도 불구하고, 플라즈마의 에너지가 낮아 다양한 산업적 응용에 제약을 받아왔다. 이러한 단점을 극복하기 위해서 대기압에서 저온 플라즈마의 에너지를 높이는 여러 시도가 있었으며, 그 중 가까이 인접해 있는 둘 이상의 플라즈마 젯들의 결합 현상(plasma jet-to-jet coupling)을 이용하여 플라즈마 강도를 높이려는 시도가 보고되었다. 본 연구에서는 플라즈마를 발생시키는 유리관을 서로 모아 벌집모양의 배열을 갖는 플라즈마 젯 어레이 장치를 만들어 플라즈마 젯 사이에 상호결합을 유도하여 강한 플라즈마 발광을 발생시켰다. 플라즈마 젯 어레이 장치 중 가운데 위치한 플라즈마 젯은 대기압 플라즈마 젯의 형태를 구현하는 역할을 하고, 가운데를 둘러싼 주변의 여러 플라즈마 젯들은 중앙의 플라즈마 젯에 많은 하전입자를 제공하여 플라즈마 젯의 발광강도를 높이는 역할을 하는 것을 확인했다. 헬륨기체를 사용한 이 플라즈마 젯은 $100^{\circ}C$ 이하의 온도임에도 불구하고 ITO 유리의 유리면을 식각할 만큼 높은 에너지를 가졌다. 이러한 대기압 저온플라즈마 장치에서 플라즈마의 강도를 더 높이기 위해서는 플라즈마 젯 간 결합이 더 많이 일어나는 것이 중요하므로, 이를 위해 주변의 플라즈마 젯의 개수를 높이는 시도를 하였다. 플라즈마 젯 어레이 소자의 중심에 위치한 유리관의 크기를 크게 하고, 주변부의 유리관의 크기를 상대적으로 작게 하여 벌집형태의 배열보다 더 많은 유리관을 주변부에 위치시킨 후 플라즈마를 발생시키고 전기 광학적 특성을 측정하였다. 그 결과, 실험조건에 따라 가운데 플라즈마 젯에서 3배에서 5배 이상 높은 플라즈마의 발광강도를 얻었으며, 플라즈마 젯도 더 안정적으로 발생하였다. 주변부의 유리관의 개수가 증가하면 더 많은 양의 하전 입자들이 플라즈마 결합 과정에 참여하게 되고 결과적으로 더 큰 플라즈마의 발광강도를 나타내는 것이다. 본 실험은 하전입자의 상호작용에 의해 발생하는 서로 인접한 플라즈마 젯 간의 결합이 대기압 저온 플라즈마 젯의 플라즈마 발광강도를 높이는 좋은 방법임을 보였다. 이러한 플라즈마 젯 간의 결합은 대기압 저온 플라즈마의 에너지를 높일 수 있는 쉽고 간단한 방법이며, 이 방법을 이용하여 대기압 저온 플라즈마를 표면처리, 표면개질은 물론, 식각 및 증착, 나아가서는 의료/바이오 분석 기술 등 다양한 학문적, 산업적 응용에도 적용할 수 있을 것으로 기대한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.169-174
• /
• 2011

Acoustic emission (AE) signals were detected and analyzed in real time during the polymerization shrinkage of composite resin restoration in an artificial dental ring with a class I cavity. Most AE hit events were observed in the initial curing period of the 1st region with high contraction rate. The range of the $2^{nd}$ region for the stainless steel specimen was shorter than that for the PMMA specimen but longer than that for the human dentin specimen. AE hit events showed a blast-type signal having an amplitude in the range of 25.45 dB and a frequency band of 100.200 kHz or 240.300 kHz. These values of amplitude and frequency indicated the fracture of resin or of the adhesive layer.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.212-219
• /
• 2016

The sprayable waterproofing membrane is installed between shotcrete to provide crack bridging and hence prevent flow of liquid water as a waterproofing system. Because of its material characteristics, the sprayable membrane can be constructed at more complex structure than sheet membrane. The main component of the sprayable waterproofing membrane is a polymer-based material, therefore, moisture can migrate through sprayable waterproofing membrane materials by capillary and vapor diffusion mechanisms. The moisture transport mechanisms can have an influence on the degree of saturation and may influence the pore pressure and risk of freeze-thaw damage on concrete linings and membrane. In this study, long-term hygrothermal behavior was simulated with considering moisture transport and long-term effects on saturation of tunnel linings. From the simulation, due to water absorption and vapor transport properties of sprayable membrane, change of relative humidity and water content in tunnel lining can be evaluated.