• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.389-397
• /
• 2019

As the usage of e-cigarettes and its effects on health harms receive attentions, the debate over regulating e-cigarette industry's' social media marketing has been heated. While the industry has aggressively employed social media marketing such as YouTube, little research has examined what kinds of e-cigarette information is delivered to Korean viewers through YouTube. This study investigated the presence of product-related information and health harm information in the videos, and the characteristics of YouTube creators. The proportion of female creators was smaller than male creators, but more than female smoking rates. The results showed that product-related information such as taste, design and convenience was mentioned more than half the videos, but health ham was mentioned less. Videos which mentioned convenience and design tended to not mention health harm. These results could be used to support the current regulation approach over e-cigarette YouTube marketing.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.61.1-61.1
• /
• 2011

NGC5929는 북동방향으로 0.5' 떨어진 NGC5930의 기조력 영향을 받는 활동성은하이다. 우리는 NGC5930이 NGC5929와의 상호작용에 따라 NGC5929의 활동성을 어떻게 유발하는지 수치실험을 알아보고자 한다. NGC5929의 적경, 적위는 (15h 26m, $41^{\circ}$40')이고, 크기는 $1'.14{\times}$ 0'.89이다. 지구로부터 거리는 36.5Mpc(적색편이는 $0.00836{\pm}0.00007km/s$)이다. 관측 자료에서 보인 NGC5929는 원반 모양의 은하 오른쪽 위쪽의 가스는 접근성, 왼쪽 아래 부분은 멀어지는 운동학적 특성이 보인다. 호스트 은하 원반이 기울어져 장축 방향이 $PA=85^{\circ}$, 단축이 $PA=45^{\circ}$ 은하의 구조임을 알 수 있다. 이 연구를 위해 우리는 하와이 CFHT 3.6m의 OASIS로 관측한 NGC5929의 중심부를 MR1, MR2로 관측한 영상을 참고하여, 이 영상에서 보이는 활동성 즉, 15*12 arcsec의 OASIS field 영역의 관측 자료에 나타난 $H{\beta}$영상이나, [O III]에 나타난 제트 형태와 방출방향에 대해 조사하였다. CFHT OASIS의 분석으로 우리는 continuum, [O III], $H{\beta}$ 선을 통한 영상을 조사하였고, 특히 [O III]영상에서 에서 강한 활동은하의 성격이 보인다. 이 방출선의 특성이 별의 UV, 행성상 성운 주변, 블랙홀 주위, 충격파 중 어느 영향이 가장 강한지 조사하였고, [O III]이미지에서 보인 제트의 형성조건에 동반은하 NGC5930의 영향이 어떠한 역할을 하였는지 조사하고, $H{\beta}$영상에 나타난 starburs지역도 살펴보고자 한다. 우리는 관측 자료에서 보인 활동성의 근원을 알기 위해 Gadget, Magalie를 사용하여 두 은하의 운동학적 및 은하의 구조에 대해 조사하려고 한다.

• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.149-158
• /
• 2022

For this study, a total of 297 TV advertisements and digital video advertisements were selected as analysis targets among domestic corporate advertisements executed for two years from 2020 to 2021. As a result of the content analysis, it was found that CSR public service advertisements, CSV advertisements, and ESG advertisements in 2020, when the corona pandemic began in earnest and ESG of companies emerged as a business management topic, showed a markedly higher execution frequency than in 2021. As a result of examining the distribution of corporate advertisement types by media, it was found that companies were executing various corporate advertisements through digital media rather than traditional media such as TV. As a result of examining the advertising appeal strategies according to the types of corporate advertisements, it was found that the emotional appeal strategy was most frequently used among the rational appeal, emotional appeal, and mixed appeal as a whole in corporate advertising. As a result of analyzing the advertisement model types according to the classification of corporate advertisements, it was found that corporate advertisements use a general model differently from brand advertisements. Lastly, as a result of examining the distribution of advertisement model types according to media types, it was found that the celebrity model is more frequently used in TV advertisements for digital advertisements.

• Clinical and Experimental Pediatrics
• /
• v.49 no.10
• /
• pp.1042-1049
• /
• 2006

Purpose : This study was conducted to survey the preliminary data on risk behaviors and to identify the factors that prevent risk-behaviors in late adolescence. Methods : Freshmen(n=1,297) beginning the first semester in Korea University, Seoul, Korea completed self-administered risk behavior questionnaires, comprising 5 domains : demographics, smoking, drinking, drug abuse and sexual behavior. Results : The rate of smoking experience was higher in people having friends who smoke and the predictors of transition to current smoking were male gender, urban residence, friends' smoking, and nicotine dependence. The rate of high risk drinking was higher among students who are male and who had experience of heavy episodic drinking. The study group showed a low prevalence of narcotic users, but two-thirds of students could get medicine easily without prescriptions. The prevalence of sexual experience was 6.5 percent, and the sexual education was not a predictor of contraceptive behavior. The prevalence of homosexuality was 1.6 percent, and the rate of mostly heterosexuality was higher in female students. Conclusion : The main targets of youth health education should be campaigns aimed at atcessation of reinforcing risk behaviors and the development of a surveillance system for the prevention of chronic disease. These results can be used to find risk factors of health-risk behaviors among late adolescents.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.754-759
• /
• 2015

Nowadays, short distance communication systems with low power energy (LPE) are developed for identification and monitoring of site identification of vessel crews and passengers (SIVCP). LPE communication modules, such as Bluetooth low energy (BLE) and Zigbee, are used for short distance communications with LPE. These modules enable 1:N communications and their popularity is growing since the modules can be mounted on movable objects, such as mobile devices and human body. When these modules are used, the important factor that affects their operation time and design are the capacity and size of battery. Therefore, they must be made as small as possible, and the battery should be selected to be slightly smaller than the module. In this study, we calculate the theoretical life of batteries used in SIVCP BLE modules using data sheet and discharge characteristic graph under the condition of a 1/250 transmission-ratio (TR). We thus calculate experimental life by measuring transmission current for the same TR, and low speed mode current for a 1/5000 TR and measure long-term experimental life using 1/25 TR for days. Through these experiments, we verify experimental methods for the prediction and extension of battery life that would enable us to select appropriate sizes of batteries based on vessel usage and passenger types. The selections of the module TR and battery size are important factors affecting the cost reduction of module design, the battery maintenance, and passenger convenience.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2008

Magnetotelluric (MT) methods are widely applied as an effective exploration technique to geothermal surveys. Two-dimensional (2-D) analysis is frequently used to investigate a complicated subsurface structure in a geothermal region. A 2-D finite-element method (FEM) is usually applied to the MT analysis, but we must pay attention to the accuracy of so-called auxiliary fields. Rodi (1976) proposed an algorithm of improving the accuracy of auxiliary fields, and named it as the MOM method. Because it introduces zeros into the diagonal elements of coefficient matrix of the FEM total equation, a pivoting procedure applied to the symmetrical band matrix makes the numerical solution far less efficient. The MOM method was devised mainly for the inversion analysis, in which partial derivatives of both electric and magnetic fields with respect to model parameters are required. In the case of forward modeling, however, we do not have to resort to the MOM method; there is no need of modifying the coefficient matrix, and the auxiliary fields can be elicited from the regular FEM solution. The computational efficiency of the MOM method, however, can be greatly improved through a sophisticated rearrangement of the total equation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.140-148
• /
• 2019

Large cast iron structures are used in casings and pipes in shipsand chemical plants. Broken parts in the casings and pipescan result in failures even when stresses are below the yield strength of the part's materials. Fatigue failure of a large cast iron structure is inevitable due to the design constraints and low reliability of the material strength. A small structure can be repaired by welding, but a large structure cannot because it cannot be preheated slowly and uniformly. This study shows that a large structure can be repaired by a cold joint method using a crack repair screw. Large cast iron structures were manufactured by GC 300, and their design stress is below 3.5 MPa. The tensile strength on notched specimens repaired by crack repair screws was 8.2 MPa. Therefore, the safety factors of structures repaired by crack repair screws have a value above 2.3 and are considered to be high values.

• Conservation Science in Museum
• /
• v.26
• /
• pp.25-34
• /
• 2021

3D printing technology has been actively applied for the restoration of cultural properties. However, its application to the restoration of glass cultural properties has not yet been reported and thus requires further study. In this study, 3D printing technology was used to restore a defective part of a glass sarira bottle that forms an element of a series of sarira reliquaries commissioned by Yi Seonggye (known as King Taejo after founding the Joseon Dynasty) that was excavated from Geumgangsan Mountain (designated as Treasure No. 1925) and is currently housed at the National Museum of Korea. The defective area was reproduced using 3D printing and the printed reproduction was reproduced again using an epoxy resin. This latter piece was used as the restoration component rather than the 3D printed element. After the completion of the conservation treatment, the materials used for the 3D printing were compared with transparent materials used to restore ceramics to evaluate their usability and stability. A total of five specimens were produced, including from photocurable resin made by a stereo lithography apparatus (SLA), epoxy resin, acrylic resin, and more. They were exposed to UV for 96 hours to test for yellowing. Of the two specimens made of photocurable resins and exposed to UV, one was sprayed with a UV blocking agent but the other was exposed as-is. The UV exposure test showed that the specimen made by the SLA and sprayed with a UV blocking agent and the specimen made of epoxy resin were stable in terms of yellowing with a change in the b-value was less than 1. They are thus considered to be suitable materials for the restoration of glass cultural properties. Such glass cultural properties are often diverse in shape and their restoration can be difficult as they generally consist of a range of complex parts that hamper restoration. In this regard, diverse materials should be considered when selecting materials for the restoration of glass cultural properties.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.151-160
• /
• 2003

The application of more complex radiotherapy techniques using multileaf collimation (MLC), such as 3D conformal radiation therapy and intensity-modulated radiation therapy (IMRT), has increased the significance of verifying leaf position and motion. Due to thier reliability and empirical robustness, quality assurance (QA) of MLC. However easy use and the ability to provide digital data of electronic portal imaging devices (EPIDs) have attracted attention to portal films as an alternatives to films for routine qualify assurance, despite concerns about their clinical feasibility, efficacy, and the cost to benefit ratio. In this study, we developed method for daily QA of MLC using electronic portal images (EPIs). EPID availability for routine QA was verified by comparing of the portal films, which were simultaneously obtained when radiation was delivered and known prescription input to MLC controller. Specially designed two-test patterns of dynamic MLC were applied for image acquisition. Quantitative off-line analysis using an edge detection algorithm enhanced the verification procedure as well as on-line qualitative visual assessment. In conclusion, the availability of EPI was enough for daily QA of MLC leaf position with the accuracy of portal films.

• Journal of the Korean Society for Library and Information Science
• /
• v.43 no.2
• /
• pp.5-28
• /
• 2009

The purpose of this study is to investigate the use of the electronic information resources of humanities scholars in Korea and propose the planning of academic library and information services to serve their needs. To collect data, a postal survey was conducted during the period of November 2007 through January 2008. Out of 799 humanities scholars sampled from 25 universities, 132 responded with a completion rate of 16%. The major findings of this study are as follows: Firstly, the majority of humanities scholars distribute their time equally between research and education, and conduct independent research. Secondly, they use, to a certain degree, electronic information resources largely in text format, and depend upon the electronic collection of their academic libraries. Thirdly, with the exception of a couple of sources of electronic journal resources, the electronic resources that these humanities scholars regularly use vary so widely that none could be considered to be a common resource. Fourthly, they value the convenience of accessing and using electronic resources, but worry about the quality and scope of the contents. It is suggested that academic libraries (1) become the gateway for the electronic information that is available both inside and outside the library, (2) provide integrated search feature for and a 'single sign on' access to electronic resources, and (3) plan customized user education for specific subject fields in the humanities.