• 제목/요약/키워드: 사업장폐기물

검색결과 67건 처리시간 0.028초

물질흐름분석을 통한 사업장폐기물의 실제적인 재활용률과 최종처분율의 산정 및 분석 (Calculation and Analysis of Actual Recycling Rate and Final Disposal Rate of Industrial Waste by Material Flow Analysis)

  • 오길종;조윤아;김지연;김기헌
    • 한국폐기물자원순환학회지
    • /
    • 제35권8호
    • /
    • pp.785-798
    • /
    • 2018
  • Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

농촌지역의 건설폐기물 중간처리 사업장 주변 환경 영향 평가 및 개선방안 연구 (A Study on Environmental Impact Assessment and Improvement Measures Around Construction Waste Intermediate Processing Sites in Rural Areas)

  • 장경필;김병윤
    • 한국농촌건축학회논문집
    • /
    • 제26권2호
    • /
    • pp.65-72
    • /
    • 2024
  • In order to analyze the impact of fine dust generated from a construction waste intermediate processing site on the surrounding areas, diverse types of samples were collected from inside the site and surrounding areas. The impact analysis results of samples are as follows. (1) Compared to the air quality management standards by the Ministry of Environment, the concentration of fine dust within the site was 30 to 46% for PM10 and 14 to 42% for PM2.5, which was not much different from the general air quality level. (2) It was found that PM10 within the site may have a partial effect on the air quality, but when the blocking facilities in the site, wheel washing facilities at vehicle entry and exit route, and sprinkler during working were maintained, the impact on the nearby area was not high. (3) In the case of PM2.5, its concentration was influenced more by the exhaust fumes from work vehicles than fine dust generated during construction waste processing. Since the PM2.5 concentrations in the site and surrounding area were not much different from the general air quality, there was little correlation with the work impact of construction waste intermediate processing sites. (4) Pb, an indicator of heavy metal components, was within 50ng/m3 in all three sites, which was 10% of the domestic management standard and equivalent to the general air quality level. The complaints from residents in nearby areas were filed using indicators based on visual and experiential information in their daily lives, so even if the survey results of environmental impact by the construction intermediate waste processing site are lower than the standard, nearby residents can feel it better than such numerical information. Therefore, specific activities to reduce find dusts should be continuously continued.

사업장계 폐목재의 흐름 분석을 통한 처리비용영향 검토 (Assesment of the industrial Wood Waste Disposal Cost through Analysis of the Treatment Flow)

  • 김제남;김수진;배재근
    • 유기물자원화
    • /
    • 제20권3호
    • /
    • pp.34-40
    • /
    • 2012
  • 본 연구는 사업장 폐기물 중 폐목재에 대한 발생량, 처리량, 운반경로 및 이산화탄소배출량, 타지역으로의 처리를 위한 운반비용 등의 흐름에 대하여 조사를 하였으며 분석된 결과를 가지고 지역에 적합한 폐목재 처리망에 대하여 검토를 하였다. 폐목재에 흐름에 대한 분석한 결과, 전체 지역 중 일부분은 지역내에서 효율적으로 처리가 이루어질 수 있음에도 불구하고 먼 지역까지 이송되어 처리되는 부적절한 처리 경로를 보이는 것으로 조사 되었다. 폐목재 흐름경로를 최적화 할 수 있는 가장 합리적인 방법은 폐목재 재활용업체들이 분포되어 있는 지역을 중심으로 하여 업체의 집단화 형식으로 조성하여, 폐기물 발생원의 근거리에 있는 재활용업체에서의 우선처리원칙이 필요하며, 필요에 따라 인근 지역의 폐기물을 동시에 처리 할 수 있는 광역처리체계 도입이 타당하다.

매립처분 오니류의 에너지회수이용 가능량 산정에 관한 연구 (A Study on Estimation of Recycling Potential by Thermal Recovery of Landfilled Sludge)

  • 문희성;김규연;손지환;전태완;신선경
    • 유기물자원화
    • /
    • 제25권4호
    • /
    • pp.5-13
    • /
    • 2017
  • 우리나라는 매립지로 반입되는 폐기물의 억제를 위해 다양한 정책을 추진하고 있다. 매립지로 처분되는 유기성 폐기물 중 하 폐수처리오니가 다량 포함되어 있다. 연료로 사용가능한 일정 발열량 이상의 오니를 발생원에서 분리 건조 가공 등 공정을 통해 에너지를 회수 할 수 있다. 본 연구에서는 한국의 오니 현황 및 특성을 조사하여 에너지를 회수 할 수 있는 오니의 종류와 양을 산정하고자 여러 오니류의 배출특성을 조사하였다. 2015 년 발생 폐기물의 9.2 %, 사업장배출시설계폐기물의 15.2 %가 매립으로 처분되었다. 조사결과, 유 무기성하수처리오니의 고위발열량 평균값은 3,021 kcal/kg, 유 무기성폐수처리오니의 평균 고위발열량은 2,472 kcal/kg이다. 본 연구에서는 오니의 특성과 에너지회수 대상에 대한 고찰을 통해 6 MJ/kg 이상의 오니를 연료로 회수이용 할 수 있을 것으로 판단되었으며, 오니매립처분량의 약 40%를 줄일 수 있을 것으로 추산되었다.

건설폐기물(建設廢棄物) 재활용(再活用) 과정에 대한 경제성(經濟性) 평가(評價) 연구(硏究) (A Study on the Economic Estimation of the Recycling of Construction Waste)

  • 박원우;이상덕;민보라;박이란;김의경;백미화;김동수
    • 자원리싸이클링
    • /
    • 제17권2호
    • /
    • pp.55-62
    • /
    • 2008
  • 산업화 과정에서는 항상 폐기물이 발생하며 그 양은 점차 증가하고 있다. 2003년 생활 및 사업장 폐기물은 전년대비 9.5%의 증가추이를 보인 반면, 건설 폐기물은 전년대비 21.0%의 높은 증가 추이를 보였다. 현재 전체폐기물 중 건설 폐기물은 50%에 육박하며, 그 중에서도 폐콘크리트와 폐아스콘이 73%를 차지하고 있다. 이에 더하여 지금까지 풍부한 천연자원으로만 여겨졌던 골재의 양이 점차 줄어들고 있어, 건설 폐기물 재활용의 필요성은 더욱 강조되고 있다. 재생골재의 활용은 막대한 건설폐기물의 처리를 용이하게 함과 동시에 골재채취로 인한 환경파괴는 물론 부족한 신규골재를 대체할 수 있는 효과를 가진다. 본 연구는 건설 폐기물중 배출량이 상대적으로 많은 폐아스콘을 중심으로 재활용 경제성 분석을 위해 비용/편익 모형을 사용하였으며, 신규골재와 재생골재간의 비용 비교만을 수행하였다. 이 식을 이용하여 2003년과 2004년을 기준으로 한, 수도권 지역 내 아스콘에 대한 재활용 경제성을 평가해 본 결과, 2003년의 0.0694보다 2004년이 0.0805로 더 높게 나타났다. 두 자료만으로 결론을 내릴 수 없으나, 이는 건설부문에서 아스콘의 재활용 가치가 높아짐을 반증하고 있다고 사료된다.

환경책임보험 배출 물질 정산의 표준화 필요성 및 산출방법 표준화 (Necessity of Standardization and Standardized Method for Substances Accounting of Environmental Liability Insurance)

  • 박명남;김창완;신동일
    • 한국가스학회지
    • /
    • 제22권5호
    • /
    • pp.1-17
    • /
    • 2018
  • 태안반도 원유 유출사고, 구미 불산누출사고 등 2000년 전후로 하여 환경관련 사건과 사고가 빈번히 발생하고 있다. 이러한 환경오염사고를 계기로 선제적 대응 방안이 필요하다는 사회적 공감대가 형성되어 2014년 환경오염피해 배상책임 및 구제에 관한 법률이 제정되고, 2016년 1월부터 시행되고 있다. 이에 따라 도입된 환경책임보험제도는 국내 보험산업계에서 환경위험을 관리하는 새로운 보험모델의 표준화 정립을 통해 관리될 필요가 있다. 지금까지 보험산업에서 표준화에 대한 노력은 다양한 위험 유형의 보장성 보험모델들의 출현에 따라 진행되어 왔다. 이에 따라 본 연구에서는 지식 기반 서비스 중의 하나인 보험 영역에서 기업에 의해 발생 가능한 대기, 수질, 화학, 폐기물, 해양, 토양 등의 환경오염 발생에 대해 6가지 보장 매체에 관한 검증 자료를 의미적 상호운용이 가능한 온톨로지를 통해 표현하였으며, 사업장의 인허가를 토대로 보험 가입 매체 간의 관계를 추론하여 보험모델을 설계하고 제시하였다. 각 사업장 담당자에 의한 물질량 정산 과정과 검증자를 통한 정산결과의 편차를 줄이기 위해, 추상적인 개념을 흐름도로 객관화, 구체화 하였으며, 해마다 많은 비용과 소모되는 자원을 줄이기 위해 온톨로지 기반의 의사결정지원 시스템의 향후 구축 방안을 제시하고 일부 구현 하였다. 이를 통해 물질량 검증 기준을 표준화함으로써 오류를 최소화하고, 검증에 소요되는 시간과 자원을 감소시킬 수 있을 것으로 기대된다.

발전회를 이용한 광산환경 복원사례 연구 (A Case Study of Mine Environmental Restoration using Coal Ash)

  • 유종찬;지상우;안지환;김춘식;신희영
    • 자원리싸이클링
    • /
    • 제26권2호
    • /
    • pp.80-88
    • /
    • 2017
  • 전 세계적으로 매년 증가하는 발전회의 매립을 위한 부지는 현저히 부족한 실정이며, 이를 재활용 하는 방안에 관한 연구는 지금까지 활발히 진행 중이다. 또한, 휴 폐광산의 갱구, 폐석 더미, 지하공동에서 발생하는 다양한 광해는 심각한 인명피해 및 환경오염을 일으킨다. 따라서 본 연구에서는 국내 석탄, 금속, 석회석 광산에서 발생하는 AMD (Acid Mine Drainage), 지반침하 등의 광해방지에서 발전회의 활용 가능성에 대한 연구를 수행하였다. 발전회는 그 물리화학적인 특성에 따라 AMD 중화, 노천광산에서의 차폐재, 지하광산의 채움재 및 토양 개량제로써 활용할 수 있으며, 미국, 호주, 일본, 캐나다 등의 국외에서는 관련 지침을 마련하여 현장 적용사례가 충분히 확보된 상태이다. 하지만 국내의 경우 현장 적용을 위한 몇몇 연구들은 수행돼 왔지만, 현재 발전회를 사업장폐기물로 분류하고 있기 때문에 현장 적용사례가 미흡하며, 이와 관련된 연구도 부족한 실정이다. 따라서 국내에서도 국외의 관련 선행 적용사례들을 참고하여 광해방지사업에서 발전회의 활용을 위한 구체적인 기준 및 관리체계가 필요할 것이다.

휘발성 유기화합물 제거를 위한 폐 촉매의 이용 (Utilization of Spent Catalysts for the Removal of VOCs)

  • 김상채;심왕근
    • 공업화학
    • /
    • 제18권4호
    • /
    • pp.303-313
    • /
    • 2007
  • 화학 산업과 관련된 많은 사업장에서 다양한 종류의 촉매를 사용하고 있으며 이들 촉매의 활성이 감소하면 산업 폐기물로서 폐기하고 있다. 또한 자동차에서 발생하는 폐 촉매의 양도 꾸준히 증가하고 있다. 활성이 감소되어 폐기된 촉매는 촉매가 지니고 있는 물리화학적 특성, 관련 환경 규제 및 경제적 효과를 고려하여 재생, 재이용, 또는 폐기될 수 있다. 폐기된 촉매는 휘발성 유기화합물(VOCs) 제거에 효과적인 것으로 알려진 귀금속이나 금속산화물을 포함하고 있으므로 적절한 처리과정을 거치면 VOCs 제거에 이용할 수 있다. 따라서 본 총설에서는 폐 촉매의 발생 및 사용 현황을 요약 정리하였으며, 특히 재생된 폐 촉매상에서 VOCs 촉매산화반응을 조사하여 그 결과를 소개하였다.

전자산업 사업장에서 발생되는 폐기물 취급 작업 근무자의 근골격계 증상 평가 사례 (Evaluation of Musculoskeletal Symptoms of Workers Treating Electronics Industry Waste at a Recycling Sorting Plant)

  • 임정민;김기연
    • 한국산업보건학회지
    • /
    • 제34권2호
    • /
    • pp.107-114
    • /
    • 2024
  • Objectives: This study was performed to evaluate the musculoskeletal symptoms of workers treating electronics industry waste at a recycling sorting plant by case survey. Methods: The musculoskeletal symptoms were investigated by conducting a survey targeting workers treating waste from the electronics industry. Through utilizing the ergonomic evaluation techniques such as RULA, REBA, and OWAS, the four tasks were divided into three detailed processes (sorting, movement, loading) and the work of workers was evaluated for a total of 12 processes. Results: As a result of the questionnaire survey on musculoskeletal symptom, 40% of workers answered that they had musculoskeletal disease symptoms, and the symptom sites were hands(30%), legs(20%), arms(10%), and shoulders(5%). Based on the results obtained from analysis through ergonomic evaluation techniques such as RULA, REBA, and OWAS, 75% of them were found to need improvement or follow-up immediately or immediately after the second stage or higher. As compared to REBA and OWAS, the RULA, which evaluates the upper limb in detail, has a higher score, and in the process of sorting and loading relatively light wastes such as paper and plastic, the waist is raised by repeating the work of bowing and stretching. Conclusions: The heavy wastes such as 200L drums were evaluated as having a low load on the elbows and wrists because body action was relatively lower than moving paper and plastic. In addition, the overall load score was evaluated lower in the moving work compared to the sorting or loading process.

국내 사업장 폐기물 중 유기오염물질의 배출특성 연구 - 금속과 플라스틱 제조공정 및 폐수처리시설 중심으로 - (Characteristics of organic pollutants in discharged industrial waste in Korea - Focuse on metallic and plastic manufacturing processes and wastewater treatment plants -)

  • 연진모;강영렬;김우일;신선경;정성경;조윤아;김나;김민선
    • 분석과학
    • /
    • 제25권6호
    • /
    • pp.421-428
    • /
    • 2012
  • 본 연구는 국내에서 배출되는 금속과 플라스틱 및 폐수처리시설 폐기물 중 유기오염물질류인 PCDD/PCDFs, PAHs, PCBs의 배출 특성을 파악하고자 수행하였다. PCDD/PCDFs의 농도는 비산재가 7.37~432.20 ng-TEQ/kg, 소각재는 0.51~855.01 ng-TEQ/kg, 분진의 0.37~385.81 ng-TEQ/kg 범위로 나타났으며 외국의 분석결과에 비해 다이옥신의 함량농도가 낮은 것으로 조사되었다. PAHs의 농도는 공정오니의 평균 함량농도가 0.0075~2.9225 mg/kg, 폐수처리오니는 0.0035~1.6716 mg/kg 범위로 나타나 해양환경관리법의 규제기준을 모두 만족하였으며, 공정오니 및 폐수슬러지의 PAHs 농도는 외국의 경우와 비교하여 다소 낮은 것으로 조사되었다. 또한, 해양환경보전법에서 관리하고 있는 PCBs 7 종을 분석한 결과(제 1기준 0.15 mg/kg 비교) 검출농도는 0.0~0.65 mg/kg으로 나타났으며, 일부 기계유 및 작동유에서 PCB-52, PCB-101, PCB-138, PCB-153 및 PCB-180 개별이성체가 초과되었다.