• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.95-103
• /
• 2021

While the existing pile foundation had the role of supporting the superstructure or reducing the earth pressure, recently there are cases where it is integrated with the superstructure to increase the lateral resistance. This study aims to evaluate a lateral resistance of block-type breakwaters with group piles by modelling experiments. The lateral resistance and bending moments of the piles by penetrated depths for the piles were measured. As a result, it was found that the lateral resistance increased as the depth of embedment of the group piles. In particular, the lateral resistance was 1.52 times greater in the case where the pile embedded up to the riprap layer than the case where the pile was embedded into the block. For the bending moment, the rear piles ware larger than the front piles, and the outside piles were larger than the inside piles. The location of the maximum bending moment in the ground was shown at the interface between the riprap layer and the natural ground.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.397-404
• /
• 2010

Laboratory tests of wave overtopping rates for a rubble mound breakwaters armoured Tetrapod were carried out, with varying design waves, crest berm widths and crest freeboards. The objective of this study is to investigate overtopping performance and to examine the characteristics of the widely used overtopping prediction models through the results of laboratory tests. Laboratory tests show that structure slope and wave periods have a considerable influence on overtopping rates, but the difference of overtopping rates related to crest berm widths is slight. Owen(1980)'s prediction considerably overestimates compared to the measured valued. Prediction of Van der Meer et al.(1998) underestimates only for steep slope($cot{\alpha}$=1.5). Besley(1999)'s and Pedersen(1996)'s predictions have a relatively good agreement with the measured results for slopes with a broader crest berm width. In general, best agreement between measured and predicted overtopping rates is observed using modified Pedersen(1996)'s formula for all test conditions.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.28-31
• /
• 2010

충청남도 서해안은 생태환경의 보고로서 갯벌, 사구, 해안습지 등 독특한 자연적 특성을 갖고 있는 지역이다. 그러나 다른 지역에 비해 대규모 간척 및 매립으로 인한 해양생태계 피해에 현저히 노출되어 있고, 최근 산업화 및 관광권화가 진행되고 있으며 해안선 침식 방지를 위한 연안정비사업으로 각종 연안 방호구조물이 건설되었다. 이 중 가장 많이 건설된 연안 호안구조물은 배후지역의 안정성 확보, 해안도로의 건설 등 다양한 목적으로 축조되었다. 그러나 성장위주의 경제정책으로 연안 호안구조물이 무분별하게 설치되어 파도와 호안 구조물의 접촉 시 호안구조물이 파랑을 견디지 못해 사면피복재가 산란되어 외관상 주변 환경을 해칠 뿐만아니라 2차 피해까지 야기 시킬 우려가 있다. 본 연구에서는 호안구조물의 리모델링을 통해 안정성을 증대시키기 위해 서해 연안지역의 4개 시 군 29개 지점을 대상으로 호안구조물 현황에 대해 조사하고 호안구조물의 리모델링을 통해 붕괴된 지역을 대상으로 파랑에 대해 안정한 사석재 소요질량을 호안구조물의 경사 별로 산정하여 비교하였다. 피복재 소요질량 산정을 위한 설계파고는 유의파고를 적용하였으며, 산정공식은 허드슨공식(Hudson, 1959)을 사용하였다. 추가적으로 사석 층의 두께와 단위면적당 수용해야할 사석재의 개수를 산정하여 호안구조물 설계 시 사석재의 배치를 용이하게 할 수 있도록 하였다. 본 연구에서 산정된 값들은 초기설계로서 파랑에 안정한 호안구조물의 설계 조건 중 일부분으로 호안구조물의 최종 설계 시 조파실험을 통하여 안정성을 검증 해야 할 것으로 판단된다.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.2
• /
• pp.49-56
• /
• 2022

This study conducted to obtain the lateral resistance of a wind power foundation reinforced with piles through an model experiment. In particular, the lateral resistance of the foundation was compared with the existing gravity-type wind power foundation by integrating the pile, the wind power generator foundation, and the rocky ground. In addition, changes in the lateral resistance and bending moment of the pile were analyzed by embeded depths of the pile. As a result, it was found that the lateral resistance increased with the depth of embedment of the piles. In particular, the pile's resistance increase ratio was 2.11 times greater in the case where the pile embedded up to the rock layer than the case where the pile was embedded into the riprap. It was found that the location of the maximum bending moment occurred at the interface between the wind turbine foundation and the riprap layer when the pile embeded to the rock layer. Through this, as the lateral resistance of the wind power foundation reinforced with piles is greater than that of the existing gravity-type wind power foundation, it is understood that it can be a more advantageous construction method in terms of safety.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2004.11a
• /
• pp.45-45
• /
• 2004

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.160-165
• /
• 2001

In this study, the effects on hydraulic characteristics are discussed as the permeable underlayer width of the rubble mound structure changes. A series of hydraulic experiments were performed and wave run-up, reflection and set-up were investigated. Results indicated that wave run-down was affected by the water out from the permeable underlayer during down-rush. As the width increased, relative wave run-up decreased.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.155-163
• /
• 2023

A two-dimensional numerical analysis was performed on the depth of pile embedment, the magnitude of the residual water level, and the condition of the presence or absence of cap concrete to understand the behavior of the block-type quay wall with piles. The results showed the control effect of the lateral displacement of the quay wall depending on the embedment of the pile. When the piles were not embedded, the lateral displacement of the quay wall increased proportionally as the residual water level difference increased. In contrast, when the piles were embedded into the ground, the control of the lateral displacement of the quay wall was greatly exerted even if the residual water level difference increased. There was little difference in the lateral displacement of the block-type quay wall regardless of the presence or absence of cap concrete. Under the condition where the piles were embedded down to the rubble mound layer, the piles exhibited the rotational behavior seen in the short piles. As the embedment depth of the piles increased, the piles showed the same bending behavior as the intermediate piles. Thus, the piles significantly contribute to the control of lateral displacement in the block-type quay wall with piles.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.290-293
• /
• 2003

경사형 방파제(rubble-mound breakwater) 설계시 제체의 장갑층으로 포설하는 블록의 규모 산정이 가장 중요한 항목인데, 경사제에서 파의 작용을 직접 받는 표층을 형성하는 개체의 중량 산정에 관하여는 오래 전부터 여러 공학자의 의해 연구되어 왔다. 대표적인 산정식들로서 barren식, Hudson식 Van der Meer식 등이 있으며, 최근 유동훈 등(2001)과 Yoo, et al.(2001)은 형태가 단순하면서도 정밀도가 높은 새로운 산정식을 개발하였다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.451-451
• /
• 2018

박층류 자연정화공법은 수로의 폭을 넓히고 수심을 낮추어 박층류를 조성하고, 이를 이용하여 하천을 정화하는 공법이다. 박층류가 조성되면 낮은 수심에서 상대적으로 느린 유속 조건이 형성되며 이 때 박층부에 침전된 오염물질은 자갈층 표면에 형성된 생물막에 의해 산화 분해되어 제거된다. 박층류에 의한 오염물질 제거는 생물막의 형성, 생물 산화를 위한 용존산소량 등이 중요한 인자로 작용하며, 박층부를 조성하기 위해서는 수심 10 cm, 유속 30~50 cm/s 의 조건이 적절하다. 본 연구에서는 박층류에 의한 자연정화 성능을 평가하기 위하여 용인시 오산천 일부 구간 고수부지에 사석자갈을 이용한 박층류 자연정화공법이 적용된 차집수로를 설치하고, 오산천으로 유입되는 농수로의 물을 공급하여 오염물질의 농도 변화를 측정하였다. 측정된 항목은 T-N, T-P, COD, DO 등이며, 측정 결과 박층류 자연정화 수로를 유출부에서의 오염물질의 농도가 유입부에서보다 저감되는 것을 확인 할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.111-119
• /
• 1987

Scale effects of stability, run-up, run-down and reflection of layered coastal structures are investigated through the experiments with 7 kinds of hydraulic scale models. The occurrence mechanism and the control method of scale effects are also discussed. As a result, it is found that the similarity of permeability of inner layers plays an important role in the occurrence of scale effects, which has been neglected in the most of conventional model tests. To assure the best scale effects for permeable coastal structures, control of Reynolds numbers of the porous media flow in each layer is recommended. It is also found that Reynolds numbers in revetment, filter, and core layer must be greater than $2{\times}10^4$, $3{\times}10^3$, and $1{\times}10^3$, respectively.