• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.413-420
• /
• 2008

Wave force is an important factor which gives a direct affect to stability of the rubble mound breakwater. Particularly wave force has been considered as the main cause of displacement for replaced rubble mound breakwater which permits a little displacement to some degree. But the effect on displacement by wave force has not been considered and reflected in design. Therefore in this study, we compared numerical analysis displacement with field measured displacement so that the effect of wave force on displacement can be reflected in design. Result of the numerical analysis displacement was well consistent with field measured displacement data.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.86.1-86.1
• /
• 2009

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.108-111
• /
• 2012

최근에 태풍 매미 등 이상 기후로 인한 기상이변이 빈번히 발생함에 따라 그에 대한 대처방안을 모색하기 위해 2005년 해양수산부에서는 지역 및 해역별 특성을 분석하여 종전 설계기준을 강화하였다. 하지만, 기존에 설계된 항만 구조물의 마루높이 및 피복재 중량 등이 새로 개정된 설계기준에 미치지 못하는 등 안전성에 대한 문제가 발생하고 있으며, 이러한 문제점을 개선하기 위해 기존 방파제를 보강하는 여러 방식이 제안되고 있다. 그 중 부유식방파제는 해수의 소통을 방해하지 않는 친환경적인 구조물로써, 연약지반에 시공이 가능하고 시공 시 오탁이 적게 발생하여 시공이 편하다는 장점을 가지고 있다. 또한 구조물의 해체 및 보강시 건설폐기물을 발생시키지 않는 친환경적인 구조물이기 때문에 새로운 방식의 대체 외곽항만구조물로 관심을 받고 있다. 이에, 본 연구에서는 사석경사제 전면에 부유식구조물을 설치하여 방파제 보강하는 방안을 제시하고자, 부유식구조물을 통과한 파랑이 사석경사제와 만나 발생하는 처오름높이를 분석하였다. 본 수치모의에서는 유체의 점성 및 난류특성을 포함하고 있는 Navier-Stokes 방정식을 그대로 해석하는 2차원 수치파동수조(CADMAS-SURF)를 이용하여 수치 모의을 수행하였다. 부유식구조물은 불투수성구조물로 수면에 고정시키는 방식을 적용하여 사석경사제의 전면에 설치하였으며, 고정된 부유식구조물의 흘수심을 변화시켜 사석경사제에서의 처오름높이를 산정하였다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.13-27
• /
• 2018

To study how stable the rubble mound breakwaters are, one can look to the research of wave induced seepage flow through the pores of the rubble mound. Seepage flow is generally generated by the difference between the water level around the breakwater during a typhoon. The existing stability analysis method of the rubble mound is the static analysis which simply considers the force equilibrium taking into account the horizontal force acting on the concrete block induced by a wave (calculated by Goda equation) and the vertical force induced by the weight inclusive of the concrete block, quarry run, filter, and armor layer above the slipping plane. However, this static method does not consider the wave-induced seepage flow in the rubble mound. Such seepage may decrease the stability of the rubble mound. The stability of a rubble mound breakwater under the action of seepage was studied based on the results of CFD software (OpenFOAM) and Limit Equilibrium Method (GeoStudio). The numerical analysis result showed that the seepage flow decreased the stability of the rubble mound breakwaters. The results of the numerical analyses also revealed the stability of the rubble mound was varied with time. Especially, the most critical state happened at the condition of overtopping the concrete block, acting strong uplift pressure raising along side and underneath the concrete block, and generating high pore pressure inside rubble mound due to seepage flow. Therefore, it may be necessary to conduct a dynamic analysis considering the effect of wave-induce seepage flow together with the static analysis.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.187-197
• /
• 2007

Experimental study for a submerged structure was conducted to protect coastal structures and shorelines. The rectangular submerged structure known as the most efficient shape among various submerged structures in the literature was fabricated at the nose of a rubble mound breakwater. The reflection coefficients and the run-up heights along the slope of a breakwater were measured for different significant wave heights and periods. It is found in this study that the reflection coefficient is affected more relatively by the significant wave period than the significant wave height and the run-up heights are reduced approximately 28% in terms of ${^{RU}}_{2%}$ and 26% in terms of ${^{RU}}_{33%}$, respectively, by the installation of a submerged structure inducing the interception and breaking of waves.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.947-954
• /
• 2005

In this study, laboratory measurements are presented for run-up heights and overtopping of water waves on slopes of rubble-mound breakwaters armored with tetrapods. The effects of wave steepness, surf similarity and wave period on the run-up height and overtopping are investigated in detail. A measurements. A very reasonable agreement is observed. A slopes of breakwaters become milder, run-up heights become smaller. The overtopping rate also is considerably rate also is considerably affected by wave steepness and period.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.81-83
• /
• 2018

국내 항만 공공시장이 침체된 상황에서 이라크 바스라주 남부지역내 컨테이너 전용부두와 일반화물부두를 조성하는 대형사업이 계획되었다. 그리스 주도의 다국적 기업인 아키로돈이 공사중인 동측방파제와 병행하여 대우건설은 15.85km 사석경사식의 서측방파제 공사를 2014년 2월부터 2018년 5월 현재까지 수행 중에 있으며 그 주된 설계, 시공현황을 요약하였다. 아울러, 시공 중 재료수급, 해양조건, 사업지 지반여건을 고려한 설계 최적화 과정도 소개하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.4
• /
• pp.249-258
• /
• 2003

In this study, the stability of armor blocks of rubble-mound breakwaters is investigated based on the 2-dimensional hydraulic model test with irregular waves. Amor blocks were used the three types; rock, cube and tetrapod. And Hudson formula and van der Meer formula which are used for calculating the weight of armor blocks are considered. Hudson formula was developed from regular wave tests, while van der Meer formula was developed from irregular wave tests. The purpose of this paper is to compare and test two selected stability formulas using the experimental data.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.290-293
• /
• 2003

경사형 방파제(rubble-mound breakwater) 설계시 제체의 장갑층으로 포설하는 블록의 규모 산정이 가장 중요한 항목인데, 경사제에서 파의 작용을 직접 받는 표층을 형성하는 개체의 중량 산정에 관하여는 오래 전부터 여러 공학자의 의해 연구되어 왔다. 대표적인 산정식들로서 barren식, Hudson식 Van der Meer식 등이 있으며, 최근 유동훈 등(2001)과 Yoo, et al.(2001)은 형태가 단순하면서도 정밀도가 높은 새로운 산정식을 개발하였다. (중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.4
• /
• pp.319-326
• /
• 2001

This paper reports on a recent investigation to determine criteria for the design of rubble-mound breakwaters. Existing theories and empirica] equations have been carefully reviewed and a new relation is proposed for the determination of optimum weight of armor unit of rubble-mound breakwater. A new parameter is introduced into the new semi-theoretical equation, which is closely related with the surface particle velocity of wave motion. The laboratory data reported by van der Meer(1987) were used for the determination of proper relations of empiricat parameters introduced into the new empirical equation.