• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.459-470
• /
• 2008

Types of slope failure related to cut slope stability are interpreted through case analyses, and also factors affecting structurally controlled instability investigated, which are developed by geologic structures along a national road No. 25 across the Cheongwon and Boeun-Guns, Chungbuk. Engineering properties such as orientation, persistence, roughness and uniaxial compressive strength of joints are analyzed by square-inventory method in three areas with well-preserved outcrops. The study area is located in Ogcheon folded bet, and are composed of quartz-schist and quartzite in the Midongsan Formation and phyllite in the Ungyori Formation. Flexural beds by folding, schistosity and cleavage besides joints are developed due to slight metamorphism. Various types of joints developed by folding are formed such as strike-parallel, strike-perpendicular, wedge and wrench joint sets by both initially regional and later superposed folding. Factors of slope instability are created by crossing the orientations of joint, cleavage, bedding and slope one another. In the case that the orientation of a slope is coincident with one of beds, factors causing large-scale failure including plane failure are increased greatly. Also in the region that orientations of the slope and bed are crossed each other at high angle, only local and minor failures are shown in the slope.

• Journal of the Korean Geographical Society
• /
• v.33 no.3
• /
• pp.365-376
• /
• 1998

The goal of this study is to find the geomorphic variables contolling gully development on hillslopes following deforestation. Two possible geomorphic processes, surface erosion and mass movement were reviewed to compare the characteristics and geomorphic variables involved. The research objective in this paper is to find the variables and the statistical model which can explain gully density in the study area. Gully density was selected as a response variable. For log gully density, the best subset regression was found to have the variables such as area, surface length, and surface width. Log area is the most significant predictor. Even with several outliers, the normal probability plot of the residuals from this regression looks straight. So, area, surface length, and surface width explain half of the variance in gully density.

• Journal of the Speleological Society of Korea
• /
• no.74
• /
• pp.67-71
• /
• 2006

The groundwater is very important in the watersource of mountain wetlands. The groundwater is out through the change of slop from gentle to steep. The watersource of the wetlands is supplied from the net of groundwater drainage. So, the slops surrounded the mountain wetlands is very important conditions. There is many the terminology of the mountain wetlands. But, it become to one, the mountain wetlands. There are two types:the slope mountain wetlands and the basin mountain wetlands.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.35-45
• /
• 2006

강원도 홍천일대의 지역은 경기육괴의 편마암이 주암종으로 이루어진 지역으로 대규모의 홍천단층이 지나고 있다. 과거 이 단층대 부근에서 건설된 도로건설시에 발생된 많은 절토사면의 붕괴를 통해 그 원인 파악 및 차후 고려해야 할 사항을 파악하는 것이 매우 중요한 과제 중에 하나이다. 본 논문은 붕괴를 토대로 붕괴의 원인 및 대책방안을 파악하고자 한다. 홍천일대의 사면붕괴를 유발시키는 원인으로는 크게 두 가지 지질구조적인 요인을 들 수 있는데 하나는 사면방향으로 발달하는 편마암내에 발달하는 엽리면을 따라 붕괴가 발생되는 사례가 있고 둘째는 단층파쇄대 및 단층대를 따라 붕괴가 발생되는 원인으로 대별할 수 있다. 두 번째의 요인은 비교적 규모가 큰 사면붕괴를 유발하게 되고 막대한 복구비용이 수반되는 결과를 초래하게 된다. 이러한 단층의 수반에 의해 발생되는 절토사면은 대책방안으로 사면경사완화 방안, 앵커 및 억지말뚝과 같은 보강방법에 의해 안정화를 시키는 사례가 주를 이루었으며 차후 이 일대의 건설공사시에는 단층대의 방향 및 규모에 대한 조사를 세밀히 이루어져야 할 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.47-55
• /
• 2002

The slope reinforcing method utilized in this paper reinforces the ground overall by means of filling borehole as well as permeating grout material into ground by injecting it through the grouting pipe. In order to reflect these characteristics to design, not only the ground reinforcing effect by the structural material itself but also the ground strength improvement effect by the grouting injection must be quantitively evaluated. But precedent research of it has been insufficient. Therefore, the slope reinforcing method was applied to the weathered rockmass slope situated in the highway in order to analyze reinforcing effect and the instrumentation of slope was performed. Through analysis of this field test, the slope reinforcing method was proved to be effective and back analysis method based on instrumentation values of slope was proposed to apply to reinforcing design. In this paper, the effectiveness of reinforcing method was certified through proposed back analysis.

• Proceedings of the KGS Conference
• /
• 2003.05a
• /
• pp.102-103
• /
• 2003

지형은 지표물질의 변위 혹은 변형, 물질의 화학적 구조가 변함에 따라 변화한다(좌등구 외, 1990 ). 이러한 지형 프로세스(geomorphological processes)는 물순환계와 밀접한 관계가 있으며, 지표공간을 이루는 대부분의 지형은 지상에 공급된 강우의 유출과정에서 형성된 것이라고 해도 과언이 아니다. 특히 곡저 또는 곡두는 유수의 배출통로인 동시에 유출특성에 기인한 각 종 지형프로세스에 의해서 형성되므로(은전 외, 1996). 사면에서 일어나는 지형 프로세스를 이해하기 위해서는 사면에서의 물의 유출과정에 대한 명확한 규명이 전제가 되어야 한다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.229-229
• /
• 2021

최근 이상기상으로 국지성 집중호우가 빈번하게 발생함에 따라 토사유출에 의해 피해가 증가하고 있다. 급경사 사면을 갖는 교란산지와 개발지의 경사면은 토양침식 위험에 노출되어 있다. 특히 지표유출수의 집중흐름에 의한 세류발달은 세류간침식에 비해 많은 토양침식과 토사유출을 발생시킨다. 이러한 급경사 사면에서의 세류발달에 대한 수리학적 메터니즘과 한계조건을 파악하고자 강우와 유입수 모의를 통한 토양침식 실험을 수행하였다. 강우와 유입수의 상호작용에 의한 세류발달의 특성과 토사유출량 증가를 파악하고자, 강우량의 증가와 유입수 유무에 따른 실험이 이루어졌다. 강우강도의 범위는 100~140mm/hr이고, 유입수는 170ml/s 이였다. 유입수량은 합리식으로 계산하였으며, 토양상자 상단에서 균등분사식으로 유입되었다. 세류발달의 수리학적 특성치를 취득하기 파악하기 위해, 염료주입 지표수 거동에 대한 동영상을 판독하였다. 세류발달은 유입수가 없는 경우 3분 이내 그리고 유입수가 있는 경우 30초 이내에 발생하였다. 토양상자내의 평균 유속범위는 7.83~29.27 cm/s 이였다. 실험에서 발달된 세류는 15분경과 후부터 평형상태를 유지하였다. 경사실험조건별로 세류 차수분석을 위해 각 세류의 최대길이, 폭, 넓이를 측정한 결과 세류의 차수는 강우만 있는 경우 1~2차로 발달하였으며, 유입수가 있을 때는 2~3차로 발달하였다. 지표유출이 증가하면서 세류발달의 개수는 줄었지만 규모는 더 크게 나타났다. 세류가 발달하는 시점의 한계유속은 10~20cm/s 범위인 것으로 파악되었다. 지표유출이 증가하면서 세류의 발달도 더 심화되지만, 동일한 강우에 일정시간동안 노출되면서 세류는 평형상태가 되어 더 이상 침식이 활발하게 진행되지는 않았다. 유입수가 있는 조건에서 수량은 약 2배가 증가하였지만, 토사유출량은 세류확장에 의해 약 4배가 증가하는 것으로 나타났다.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.129-143
• /
• 2017

The shallow sediments in the southwestern Ulleung Basin consist of mass flow deposits such as slide/slump and debris flow deposits (DFD), caused by slope failure. These sediments are proven to be important in studying geological disaster and stability of the seafloor. In this paper, we analysised the flow accumulation and slope failure susceptibility of the Ulleung Basin on the basis of multi-beam data, collected in this area. We also studied the distribution pattern and the seismic characteristics of the DFD in the uppermost layer of the Ulleung Basin on the basis of seismic data. The slope susceptibility was calculated as the frequency ratio of each factors including slope, aspect, curvature and stream power index (SPI), which causes the slope failure. These results indicate that the slope failure is frequently to occur in the southern and western continental slope of the Ulleung Basin. The sediment flow (mass flow) caused by the slope failure converges to the north and northwest of the Ulleung Basin. According to the seismic characteristics, the uppermost layer in study area can be divided into four sedimentary unit. These sedimentary units develop from the south and southwest to the north and northwest in association with slope susceptibility and flow accumulation.

• Journal of the Korean Geographical Society
• /
• v.39 no.1
• /
• pp.45-55
• /
• 2004

The paper describes the rainfall-runoff. soil moisture distribution and subsurface flow of 'U-shaped Goll' valley head slope to evaluate quantitatively the interaction between the water circulation system and geomorphic development. The findings are as follows: The fissure and the pipe entrance in front of 'U-shaped Goll' introduce a lot of direct runoff into either the soil pipe or the soil layer to accelerate the erosion of the soil layer, so that they are likely to contribute to the expansion and development of the soil pipe. Most of soil water is to be drained in pipe flow, while some of remaining soil water is to be fed into groundwater. Therefore, low rainfall intensity is thought to let both the groundwater level and the pipe flow react sensitively by the effects of the precedent rainfall even at events: As a result, the soil pipe is said to be an important factor having influence upon the material balance of 'U-shaped Goll' valley head slope. On the other hand, the groundwater shows greater specific flux at the top than at the bottom, and relatively larger specific flux is applied to the top to make 'U-shaped Goll' valley head slope go back to the top.

• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.670-681
• /
• 2006

The purpose of this study is to clarify the behavior of subsurface water flow during rainfall on the hillslope in the Dongguneung experimental basin. As a result of the study, the following conclusions were obtained. Under the total rainfall of 20mm, there were no groundwater level changes. However, it was found that total rainfall amount and rainfall intensity were important factors to change groundwater level in hilly slope. Also the rainfall duration and preexisted rainfall amount were important factors to change it on the head hollow. To analyze the modification of 'U-shaped Gol' landform, the pattern of return flow and through flow have to check during storm events. The microgeomorphic change of head hollow is based on the pattern of subsurface water flow.