• Journal of the Korean Geographical Society
• /
• v.45 no.3
• /
• pp.375-389
• /
• 2010

In order to investigate the rates and factors of slow mass movement on a subalpine slope of Mount Halla, two painted stone lines were monitored in a bare patch at 1,710 m a.s.l. The mean movement of surface gravels is 58.2 cm, equivalent to 0.24 cm/day. However, the rates of movement vary with seasons. Compared with 0.05 cm/day of a non-frozen season, a frozen season shows 0.3 cm/day. It implies that the movement of surface gravels could be largely controlled by periglacial processes during a frozen season. In particular, frost creep including needle ice creep plays a main role in the movement of gravels under the thermal and soil conditions which are favorable for needle ice development. Since line II is located at a steeper slope than line I, the movement of line II was always larger than that of line I. However, slope gradient is not the most dominant factor contributing the movement of gravels, which can be interrupted by downslope big gravels and vegetation patches. The size and specific weight of gravels also can influence the movement of gravels. Porous and light scoriae result in relatively quick movement of gravels on the subalpine slope of Mount Halla.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.353-363
• /
• 2012

The geology of Ulleung-Do is dominated by volcanic rocks with low strength and trachytic rocks with high strength but containing vertical joints that yield easily. Consequently, rockfalls along roadcuts are a major geological hazard, with the potential to affect the ring road of Ulleung-Do. In this study, we performed three types of rockfall hazard-risk assessment on the 3-km-long section of the ring road expected to have the highest possibility of rockfall. We used a rockfall ranking sheet in a roadside landslide hazard map, the Slope Stability Inspection Manual for National Highways (Japan), and a rockfall hazard rating system for inspection from the Japan Highway Public Corporation. We also employed the evaluation criteria of 'RHRS' developed by the Federal Highway Administration (FHA). An analysis of roadcuts at 27 sites with regard to geographic and geological conditions resulted in the identification of three classes of rockfall hazard (high, medium, and low). Of note, over 74% of slopes were assessed as high- and medium-class. Finally, a rockfall hazard map of the northeast region of Ulleung-Do was produced based on the evaluation results.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.47-56
• /
• 2005

With the need of efficient site use retaining walls have frequently used. Of them dry cast modular block wall(MBW), in which geogrid and concrete block are used is getting popular because of its simplicity and economical efficiency of construction. However, since this method is based on the theory of earth pressure, sands with good quality should be used. In contrast, reinforced soil slope(RSS) that the slope is less than $70^{\circ}$ can use wider range of soil than MBW. A hybrid reinforced geo-structure might be a good alternative in view of overcoming difficulty obtaining soils with good quality as well as maximizing the efficiency of site use. This method is composed of reinforced block wall and reinforced soil slope. In this method, reinforced block wall is constructed up to a certain height vertically at ground boundary first. Reinforced soil slope is then constructed on the block wall subsequently. This paper introduces several technical points that should be taken into account in design and construction.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.487-498
• /
• 2004

There is an increasing trend of construction works in mountainous areas by the urban development in Busan that is mainly composed of mountains. The study area, Hwangryeong Mt., is one of developing sites in the urban area, too. Landslides and cut-slope failures that occur large damages of human beings and the properties are influenced by soil characteristics as well as rock properties. This study analyzed geotechnical characteristics of soil dependent on geology at Hwangryeong Mt. where a large slope failure had been occurred in 1999. Geology of the study area is composed of the Cretaceous sedimentary rocks and volcanic rocks. Soil layer of the slopes can be grouped into sand mixed with clay and silt. The cohesion is plotted between $0.001\;and\;0.066kg/cm^2$. The friction angles are distributed in the ranges between $32^{\circ}\;and\;39^{\circ}$, meaning soil bearing a high friction angle. The permeability coefficients are plotted between $2.34\times10^{-4}cm/sec\;and\;2.58\times10^{-2}cm/sec$, indicating fine sand and loose silt with a medium grade of permeability. The sedimentary rocks area shows relatively higher permeability coefficients than those volcanic rocks area.

• The Journal of Engineering Geology
• /
• v.21 no.4
• /
• pp.281-293
• /
• 2011

We investigated the causes and characteristics of a landslide at Hwangryeong Mountain, Busan, based on aerial photos, annual precipitation data, rock fracture patterns, and geomorphic features using GIS Software, and a statistical analysis of tilted trees. The analyzed slope shows evidence of a previous slope failure event and the possibility of future failures. Although the NW-SE trending slope was relatively stable until 1975, a large-scale slope failure occurred between 1975 and 1985 due to complex factors, including favorably oriented geologic structures, human activity, and heavy rain. This indicates that a detailed study of geologic structures, slope stability, and rainfall characteristics is important for slope cuttings that could be a major factor and cause of urban landsliding events. The statistic analysis of tilted trees shows a slow progressive creeping type of mass wasting with rock falls oblique to the dip of the slope, with the slope having moved towards the west since 1985. A concentration of tree tilting has developed on the northwestern part of the slope, which could reach critical levels in the future. The analysis of deformed trees is a useful tool for understanding landslides and for predicting and preventing future landslide events.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.234-246
• /
• 2007

The role of macropore in the hydrological processes is important at the hillslope scale. Developments and distribution of macropores have not been investigated in conjunction with the characteristics of the hillslope such as topography, soil property, and soil moisture. In this study, macropore properties, such as macropore flow and saturation hydraulic conductivity were measured at a hillslope located in Gwangneung Research Forest, Pochun-gun, Gyeonggi-do, South Korea. An intensive field survey provided a refined Digital Elevation Model (DEM) for surface and subsurface topography. Spatial distributions of upslope area and topographic index were obtained through the digital terrain analysis. The total number of monitoring points was 22, and the selected points were distributed along the transect of the digital contour map. Vertical fluxes through macropores were measured using a tension infiltrometer at the depth of 0.1 m from the surface. Spatial and temporal distributions of soil moisture were obtained using an on-line measurement system, TRASE, installed in the study area. Soil moisture for the aforementioned points was measured at 0.1 and 0.3m depths below the surface. The results from tension infiltrometer experiments present that the macropore flows ranged between 21 and 94%, and the measured macroporosities varied from 1.4 to 47%. Macropore flows and macroporosities tended to increase as the measurement location moved to downslope. The ability for water conduction through macropores becomes increasingly developed as the location approaches the outlet of the hillslope.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.713-719
• /
• 2001

The aim of this study is to check the application criteria of the conventional techniques and clarify the effects of breaker depth, seabed conditions on the stability in relation to the effects of uncertainty of storm duration and directional irregular waves. The typical damage modes were divided by the direct wave force on the armor unit and by the local scouring around the toe of a breakwater head by the model experiments. The destruction modes are defined, and some criteria on the damage modes and scouring/deposition at the toe of a breakwater head in relating the wave-bottom-structural conditions can be checked using the multi-directonal irregular wave generator system. According to the results, it is emphasized that the 3-D effects on the stability should be analyzed in the design of multi-purpose/function coastal structures in consideration of the evaluation of spatial variation of damage modes and hydraulic characteristics as well as the wave distribution along the structures.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.310-322
• /
• 2000

The objectives of this study were to classify the types of vegetation in Pinus densiflora for. erecta stands. The study sites were located at Sokwang-Ri, Mt. Chungok(1,276m), Uljin, Mt. Kumma(1,017m) and Mt. Eungbong(1,267m). Two hundred thirty releves were classified and explained by phytosociological analysis(the method of ZM schools), and the results were summarized as follows. Pinus densiflora for. erecta stands were classified into Vaccinium koreanum community, Rhododendron micranthum community, Quercus dentata community, Acer pseudosieboldianum community, and Typical community. Quercus dentata community was divided into Festuca ovina group, Robinia pseudoacacia group, and Typical group, and Acer pseudosieboldianum community was divided into Hydrangea serrata for. acuminata group, Disporum smilacinum group, Magnolia sieboldii group, Carpinus laxiflora group, and Typical group, and Typical community was divided into Melampyrum roseum group and Typical group. And some groups were divided into 7 subgroups. Therefore, Pinus densiflora for. erecta stands had total of 16 vegetation units, out of those units, Vaccinium koreanum community distributed all over the studied areas. While Rhododendron micranthum community distributed mainly at Sokwang-Ri and Mt. Chungok. Therefore it was considered to be useful indicator in determining the range of afforestation and natural distribution of Pius densiflora for. erecta stands. The classified vegetation units were investigated by using of coincidence method. The results indicated that Quercus dentata community distributed mainly below 100 meters at the sea level, while other communities distributed above 350 meters at the sea level. According to the correlations between vegetation units and topography, Vaccinium koreanum and Rhododendron micranthum communities distributed mainly above middle slope areas, Quercus dentata community distributed mainly from lower slope to upper slope areas, Acer pseudosieboldianum community distributed mainly between valley and lower slope areas, and Typical community distributed mainly above upper slope areas. According to the correlations between vegetation units and 5 study areas, Quercus dentata community was distributed in the region of Uljin, and other communities were evenly distributed over other studied areas. According to the correlations between the units and aspects, all communities occurred all aspects, but most of the communities tended to be more distributed at south slopes than at north slopes, which meant that the relic stands of Pinus densiflora for. erecta were remained largely as patch phase status at south slopes.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.85-97
• /
• 2019

It can be observed that steep slopes ($65^{\circ}$ to $80^{\circ}$) consist of rock masses were kept stable for a long time. In rock-mass slopes with similar ground condition, steeper slopes than 1 : 0.5 ($63^{\circ}$) may be applied if the discontinuities of rock-mass slope are distributed in a direction favorable to the stability of the slope. In making a decision the angle of the slope, if the preliminary rock mass conditions applicable to steep slope are quantitatively setup, they may be used as guidance in design practice. In this study, the above rock mass was defined as a good continuum rock mass and the quantitative setup criterion range was proposed using RMR, SMR and GSI classifications for the purpose of providing engineering standard for good continuum rock mass conditions. The methods of study are as follows. The stable slope at steep slopes ($65^{\circ}$ to $80^{\circ}$) for each rock type was selected as the study area, and RMR, SMR and GSI were classified to reflect the face mapping results. The results were reviewed by applying the calculated shear strength to the stable analysis of the current state of rock mass slope using the Hoek-Brown failure criterion. It is intended to verify the validity of the preliminary criterion as a rock mass condition that remains stable on a steep slope. Based on the analysis and review by the above research method, it was analyzed that a good continuum rock mass slope can be set to Basic RMR ${\geq}50$ (45 in sedimentary rock), GSI and SMR ${\geq}45$. The safety factor of the LEM is between Fs = 14.08 and 67.50 (average 32.9), and the displacement of the FEM is 0.13 to 0.64 mm (average 0.27 mm). This can be seen as a result of quantitative representation and verification of the stability of a good continuum rock mass slope that has been maintained stable for a long period of time with steep slopes ($65^{\circ}$ to $80^{\circ}$). The setup guideline for a good continuum rock mass slope will be able to establish a more detailed setup standard when the data are accumulated, and it is also a further study project. If stable even on steep slopes of 1 : 0.1 to 0.3, the upper limit of steep slopes is 1 : 0.3 with reference to the overseas design standards and report, thus giving the benefit of ensuring economic and eco-friendlyness. Also, the development of excavation technology and plantation technology and various eco-friendly slope design techniques will help overcome psychological anxiety and rapid weathering and relaxation due to steep slope construction.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.543-552
• /
• 2015

This study examines the processes of rock weathering and tafoni formation targeting tafoni at Mt. Cheonsaeng, Gumi-si, Gyeongsangbuk-do. In the study area, a frequency of tafoni is high in conglomerate and conglomeratic sandstone among regional sedimentary rocks, which means that an initial stage of the formation begins a breakaway of gravel from bedrock and also exfoliation from rock surface. Geomorphologically tafoni have intensively been developed at the southfacing slope with exposed rocks, which means that its formation was favorably controlled by environmental conditions including strong influences of mechanical weathering in winter and chemical weathering in summer times. The results of measuring water content at a tafoni-bearing rock surface using GIS interpolation analysis indicate that moisture rate in/around tafoni is higher than the periphery. Thus, it is considered that moisture distribution at a rock surface plays a role in its formation. Analysis of percipitation and secondary minerals induced by chemical weathering is in progress.