• Land and Housing Review
• /
• v.7 no.4
• /
• pp.291-297
• /
• 2016

Recently, foreign construction companies through the BIM-design have the effect of improving productivity and quality construction. On the other hand, domestic BIM-design is a little depressed because of lack of additional costs and professional personnel problem. The construction industry of recession, as reasons of construction market is downsizing. First must, enabling the design in public institutions, mainly BIM.. Design for BIM the construction sector, as well as an early stage actively introducing and spreading of the performance of him and domestic BIM technology should be able to promote the development. Public institutions in accordance with this study presented measures that can stimulate the BIM design on LH. To that end, the public agency's design were analyzed, and suggested the Improvement and Application of the four aspects for Modular Coordination BIM Design. Also, gradually formulate a "road map for public institutions applied design bim" in order to carry out the plans put forward and presented the expected effect of him. The proposed work was public institutions will be used as a pilot project in Korea Land Housing Corporation.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.91-98
• /
• 2009

One role of waterproofing work is to block external moisture and water. Defects in waterproofing work in building construction brings on huge repair costs for related construction work as well as for the waterproofing layer itself. However, we don't have a quantitative probabilistic management method for waterproofing work to successfully anticipate and prevent defects. From an analysis of the literature and prior research, defects in the waterproofing work in the underground parts of buildings occur frequently. We selected Fluid-Applied Membrane waterproofing work as representing waterproofing work in the underground parts of a building, and researched the general types and causes of defects. In this study, we developed the Relative-FMEA (Failure Mode and Effect Analysis) approach that merges the Matrix method and FMEA. From a survey of experts, we deduced the most important management factors for Fluid-Applied Membrane waterproofing work for the underground parts of buildings.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.2 s.24
• /
• pp.139-149
• /
• 2005

The major purpose of construction project management is to meet defined targets(scope or quality) on schedule and budget. Korean construction industry is suuering from lower productivity as compared to other industry sectors. 'Management software' of the construction industry has not been developed as fast as hardware in the aftermath of compressed economic development following the Korean War. Therefore, this study is intended to compare project execution at planning phase and at completion phase and identifying the risk factor of construction projects. Construction projects are more extensive and long-winding than any other projects and stake holders of complex interests are often involved. In this study, we identified and analyzed risk factor for domestic building construction projects and outputs of this study will be conducive to the improvement of construction management processes in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.108-115
• /
• 2018

Time is considered as an important factor to understand the diffusion behavior of single generation technology. However, multiple generation technology required additional factors in addition to time to understand the diffusion behavior. This study defined the diffusion path of multiple generation technology based on dimensions of 'time, price, and performance' after extracting price and technical performance factors and traced the diffusion path of semiconductor industry based on defined dimensions. The case study of semiconductor industry indicated that the diffusion path is determined maximizing the integrated area of price and performance. This study has theoretical implications in that it analyzed the diffusion behavior of multiple generation technology based on multiple dimensions and can forecast the diffusion behavior at matured as well as early stage technology. Also, this study has practical implications for R&D and marketing managers to understand time-to-market, exit time, and economical as well as technical requirements.

• Tunnel and Underground Space
• /
• v.25 no.3
• /
• pp.221-230
• /
• 2015

This study examined and analyzed several mine management software programs developed in domestic and oversea countries. In the oversea countries, many companies have developed and commercialized mine management softwares such as Dispatch, $Cat^{(R)}$ $MineStar^{TM}$ and FARA. These softwares provide many functionalities including real-time machine tracking, machine assignment optimization, productivity management, equipment health monitoring and remote control. For the domestic cases, this study reviewed two software programs (i.e., GEMISIMS, Truck-Shovel fleet optimization) developed by several researchers because there is no mine management software currently commercialized in Korea. In addition, this paper reports the two cases at the Jwaneng mine in Botswana and at the Robinson mine in United States where mine management software programs are used to support mine operations.

• Tunnel and Underground Space
• /
• v.15 no.5 s.58
• /
• pp.359-368
• /
• 2005

In case the overburden of a tunnel is too low to adopt NATM, cut and cover method generally can be chosen as alternative. However, in tunneling some area with very low or no overburden between two mountains, the cut and cover method requires additional construction of a couple of tunnel portals and the maintenance of portal slopes until backfilling is completed. As a solution for this problem, increasing the tunnel overburden by raising the ground level can be effective. This paper presents the case study for tunneling at C240 site in Taiwan High Speed Railway(THSR) in which soil-cement filling method was used for pre-banking before tunnel excavation. Cement content of filling material was $2\~4\%$ and thickness of filling a round was $130\~250\;mm$. The stability evaluation for the soil-cement slope and concrete lining of low cover tunnel was conducted by numerical analysis.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.163-174
• /
• 1999

This paper presents a case history of remedial action adopted for contaminated groundwater in a landfill. The objectives of the projects are : (1) to effectively confine contaminated groundwater with an economically reasonable means, (2) to prevent further contamination of soil by collecting and treat the contaminant. and (3) to assure the environmental safety of the landfill during its operating period. Reported are the process from site investigation, through design and construction of an appropriate remedial action, to the monitoring of the selected confinement system. In view of the results of site investigation, deep soil mixing cutoff wall using the DMW(deep soil mixing cutoff wall) method and specially produced HEC soil stabilizer were used for the construction of deep soil mixing cutoff wall. For rock foundation with sever fractures, chemical grout curtain with urethane was installed. The monitoring results to date indicate that the selected vertical barrier performed satisfactorily.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.217-223
• /
• 2020

As construction work on soft ground increases, many researchers have studied to secure the stability of trafficability with interest in construction safety accidents due to reinforcement work. Although the stability of soft ground is evaluated based on the allowable bearing capacity of theoretical equations proposed in the literature such as Yamanouchi and Meyerhof formulas, further numerical verification also requires comparison of the stress increase (Δσ_z) and deformation of the distributed contact pressure on the soft ground. In this study, the deformation of the soft ground is compared with the increasing the seam tensile strength of geotextile using the finite element analysis program, and the stress increase is investigated by variation of the distributed contact pressure by appling input data of case study.

• Journal of Engineering Education Research
• /
• v.14 no.4
• /
• pp.20-28
• /
• 2011

Writing education for the students who major in natural sciences and engineering is concentrated on just writing in liberal education. So, this article study the condition and practical solution of writing education with a focus on natural sciences and engineering. This article researches the condition of writing in these majors of Seoul National University, Massachusetts Institute of Technology and Stanford University. As a result, students keenly feel the necessity of writing in this major, but SNU does not offer such courses and few teachers that could teach it. To solve this, we propose that writing teachers of liberal education give feedback on the reports of the capstone research subject 3 or 4 times, which corresponds to 1 credit. This solution would be applicable to most universities in practice, though it is not final method.

• Journal of Engineering Education Research
• /
• v.13 no.6
• /
• pp.171-179
• /
• 2010

In this paper, we describe a case study of a new lab. project that improves efficiency for education and interest on learning in image processing and pattern recognition related subjects by using LEGO Mindstorms. In addition we verify the validity with analysis of the practical application. LEGO Mindstorms is already used in many educational institution of several countries since about 10 years ago and various case studies have been published. The use of LEGO Mindstorms is generally positive but the negative comments about this exist. The main cause of negative opinion is from unpredictability. The unpredictability from mainly analog characteristics of robot can degrade the effective learning. The describing lab. project suppresses occurrence of unpredictability by minimizing dependence on robots. Students can concentrate on learning the related algorithms by minimizing the learning content and further consideration.