대한토목학회논문집 (KSCE Journal of Civil and Environmental Engineering Research)

  • 제40권2호
  • /
  • Pages.217-223
  • /
  • 2020
  • /
  • 1015-6348(pISSN)
  • /
  • 2799-9629(eISSN)
대한토목학회 (Korean Society of Civil Engeneers)
권호 표지
DOI QR코드

DOI QR Code

Geotextile이 포설된 연약지반 지지력 평가를 위한 수치해석 비교분석

Numerical Analysis for Evaluation of Bearing Capacity on Soft Ground with Geotextile

  • 채유미 (동신대학교 토목환경공학과) ;
  • 김재홍 (동신대학교 토목환경공학과)
  • 투고 : 2019.11.05
  • 심사 : 2020.03.03
  • 발행 : 2020.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

연약지반에서의 공사들이 증가되면서 안전사고에 대한 관심도가 많아지고 보강공사에 따른 장비진입의 안정성을 확보하고자 많은 연구들이 진행되고 있다. Yamanouchi와 Meyerhof 수식과 같이 기존 문헌에서 제안하고 있는 이론적인 방정식들은 허용지지력을 계산하여 단순한 연약 지반 안정성을 평가하고 있으므로, 추가적인 수치해석 검증을 통해 연약지반 위의 접지압에 대한 응력증가분과 변형에 관한 이론방정식 검증이 필요하다. 본 연구에서는 유한요소해석 프로그램을 이용하여 토목섬유의 봉합인장강도의 증가에 따른 연약지반의 변형을 비교하였고, 접지압의 하중 크기에 따라 지중내 응력증가분의 상승을 현장에서 적용한 사례를 토대로 비교하였고, 이 적용사례를 토대로 접지압의 하중 변화에 따른 지중내 응력증가특성을 규명하였다.

As construction work on soft ground increases, many researchers have studied to secure the stability of trafficability with interest in construction safety accidents due to reinforcement work. Although the stability of soft ground is evaluated based on the allowable bearing capacity of theoretical equations proposed in the literature such as Yamanouchi and Meyerhof formulas, further numerical verification also requires comparison of the stress increase (Δσz) and deformation of the distributed contact pressure on the soft ground. In this study, the deformation of the soft ground is compared with the increasing the seam tensile strength of geotextile using the finite element analysis program, and the stress increase is investigated by variation of the distributed contact pressure by appling input data of case study.

키워드

참고문헌

  1. Busan Regional Maritime Affairs and Port Office (2013). Busan newport report (West container port hinterland construction) (in Korean).
  2. Chae, Y. M., Kim, J. H., Kim, M. J. and Kim, T. W. (2019). "Bearing capacity of soft soil by increasing seam tensile strength of geotextile." Fall Geotechnical Engineering Conference, 2019, pp. 163-164.
  3. Jeon, H. Y., Yuu, J. J. and Chang, Y. C. (2008), "Seaming behaviors interpretation of geotextile tube." Fall Geotechnical Engineering Conference, 2008, pp. 1593-1603.
  4. Kim, S. H., Chae, Y. M. and Kim, J. H. (2019). "Modification of bearing capacity formula considering seam tensile strength of geotextile in soft ground." Journal of the Korean Geotechnical Society, Vol. 35, No. 12, pp. 59-67 (in Korean).
  5. Meyerhof, G. G. (1974). "Ultimate bearing capacity of footings on sand layer overlying clay." Canadian Geotechnical Journal, Vol. 11, No. 2, pp. 224-229.
  6. Ministry of Ocean and Fisheries (MOF) (2012). Habor and fishing port design standard (in Korean).
  7. Plaxis (2019). Plaxis 2D user's manual, Bentley Systems, Inc.
  8. Yamanouchi, T. (1985). "Recent development in the used synthetic geofabrics and geogrids." Symposium on Recent Developments in Ground improvement Techniques, Bangkok, pp. 205-224.
  9. Korea Agency for Infrastructure Technology Advancement (KAIA) (2018). Development of sealing technology and efficient installation method for increasing joint strength of geotextile in soft ground, R&D Report, 18RDRP-B076564-05, South Korea (in Korean).