• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.173-179
• /
• 1999

The defects on the metal surface. such as the ended circular pressed hole. the penetrated circular drilled hole, and the linear hollow lanes have been investigated by means of the microwave. In this experiment, frequency was set at 9.2GHz with 3kHz modulation, and the methods of reflection, transmission, fixed carrier frequency, and mod-demodulated technique have been used for investigating defects. The magnitudes of the microwave signals have been changed at the ended circular pressed hole and the penetrated circular drilled hole. The defect sizes that were estimated from the reflected microwave signals had the dimensions enlarged by twice the original size of the penetrated circular drilled hole and 2.5 times the original size of the ended circular pressed hole. The magnitudes of the reflected microwave signals from the linear hollow lane have increased with expansion of the width of the notch. In the linear hollow lane with the depth of 2.4mm, the reflected microwave signals versus the defect widths had a maximum value at the defect width of 50mm, and in the linear hollow lanes with the depths of 1.2mm and 0.45mm, the reflected microwave signals versus the defects widths had the maximum values each at the defect depths of 55mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.336-339
• /
• 2013

Location-Based services that collect location information for moving object and utilize in real life are being used in many aspects by the development of wireless network technology. Accordingly, new index structures are required to efficiently retrieve the consecutive location of moving objects. This paper addresses algorithms that make index structure by using Douglas-Peucker Algorithm and process range query efficiently on moving objects trajectories. Our algorithms are going to make smaller size of index structure and process more efficiently.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.78-86
• /
• 2014

In this paper, a novel intensity-based fiber optic vibration sensor using a mass-spring structure, which consists of four serpentine flexure springs and a rectangular aperture within a proof mass, is proposed and its feasibility test is given by the simulation and experiment. An optical collimator is used to broaden the beam which is modulated by the displacement of the rectangular aperture within the proof mass. The proposed fiber optic vibration sensor has been analyzed and designed in terms of the optical and mechanical parts. A mechanical structure has been designed using theoretical analysis, mathematical modeling, and 3D FEM (Finite Element Method) simulation. The relative aperture displacement according to the base vibration is given using FEM simulation, while the output beam power according to the relative displacement is measured by experiment. The simulated sensor sensitivity of $15.731{\mu}W/G$ and detection range of ${\pm}6.087G$ are given. By using reference signal, the output signal with 0.75% relative error shows a good stability. The proposed vibration sensor structure has the advantages of a simple structure, low cost, and multi-point sensing characteristic. It also has the potential to be made by MEMS (Micro-Electro-Mechanical System) technology.

• Journal of the Korean earth science society
• /
• v.34 no.3
• /
• pp.189-194
• /
• 2013

In this study, the patterns of barotropic vortices and their structural rotation were investigated through laboratory experiments. Both stable and unstable barotropic vortices were formed in a rotating water tank with a rotating circular plate depending on the diameter, direction, and speed of rotating circular plate. The patterns of stable vortices turned out to be tripolar, triangular, rectangular, and monopolar vortex. These vortex patterns were affected by the gap between the circular plate and the wall of the water tank. Many unstable vortices were formed by anticyclonically and highly rotating circular plate. These results were caused by the centrifugal instability. The structural angular velocity of the tripolar vortex increased with the tangential velocity of the circular plate. The anticyclonic tripolar vortex had higher structural angular velocity than the cyclonic vortex. The tripolar vortex in the water tank was very similar with the real oceanic tripolar vortex from the view point of the Rossby number and the structural rotation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.71-81
• /
• 2014

In this paper, the performance variations of tri-gate FinFET are analyzed for different fin shapes and source/drain epitaxy types using a 3D device simulator(Sentaurus). If the fin shape changes from a rectangular shape to a triangular shape, the threshold voltage increases due to a non-uniform potential distribution, the off-current decreases by 72.23%, and the gate capacitance decreases by 16.01%. In order to analyze the device performance change from the structural change of the source/drain epitaxy, we compared the grown on the fin (grown-on-fin) structure and grown after the fin etch (etched-fin) structure. 3-stage ring oscillator was simulated using Sentaurus mixed-mode, and the energy-delay products are derived for the different fin and source/drain shapes. The FinFET device with triangular-shaped fin with etched-fin source/drain type shows the minimum the ring oscillator delay and energy-delay product.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.195-200
• /
• 1998

Purpose: When an elongated x-ray field is used for treating a patient, the equivalent- field method is commonly used for the output calculation. This study is intended for investigating potential factors such as, beam quality, field elongation ratio, and depth of measurement, which might effect on the applicability of the equivalent square technique for output calculation. The derivation of a 'rule of thumb' for the application criteria of the equivalent-field method is also aimed. Materials and Methods: Three x-ray beams, 4-, 6- and 10-MV, were employed for this study. Width of the rectangular field was ranged from 5-40 cm and the elongation ratio (length/width) 1:0 to 10:0. An elongation effect was measured in a water phantom at three different depths, dmax, 5-cm, and 10-cm. For an elongated field and its equivalent square field, the output factor was measured and the difference in the output factor were examined between two fields. Results and Discussions: As the elongation ratio increases, a larger discrepancy in outputs is observed between the elongated rectangular field and its corresponding equivalent square field. Output was measured larger for an elongated field than for its corresponding equivalent square field and the maximal difference over 10 % was found. The difference was found larger for the smaller field with the same elongation ratio. The effect of the beam quality and the depth of measurement on the output difference was minimal. Conclusion: Based on the study, there is criteria for the application of the method for output calculation. For the combination of long axis and elongation ratio whose relationship satisfies Elongation ratio < (0.48) (Long axis) - 0.5, the equivalent-field method is valid for output calculation within 2 % for the field whose long axis < 25-cm. For other combinations, instead of using the equivalent-field method, direct output measurement is recommended. This criteria can be applied for 4-10 MV x-ray beams up to 10-cm depth.

• Journal of Elementary Mathematics Education in Korea
• /
• v.20 no.3
• /
• pp.393-406
• /
• 2016

In the sixth grade mathematics, drawing of development figures of the triangular prism and the quadrangular prism is recommended in terms of the creativity. In this sense, the teacher has the need to check in advance all the possible development figures of the triangular prism and the quadrangular prism before teaching on them. However, previous studies that currently give all the possible development figures of the triangular prism and the quadrangular prism are hard to find. For this reason, in this paper, as a study of teaching materials for the professional development of elementary school teachers, the method of finding all the possible development figures of the triangular prism and all the possible development figures of the quadrangular prism without omissions and overlaps and the number of each of development figures which can be obtained by that method are discussed. Here lengths of the three sides of base planes of the triangular prism are different each other and lengths of the four sides of base planes of the quadrangular prism are different each other. This discussion is needed in terms of a study of teaching materials in order to prepare for predictable questions to ask the number of the possible development figures of the triangular prism and the number of the possible development figures of the quadrangular prism in classes. In addition, through this discussion, this paper presents the development figures of the triangular prism and the development figures of the quadrangular prism without omissions and overlaps. And teachers can take advantage of them for determining the correctness of the development figures drew by students and guiding students to draw the development figures creatively in actual classes.

• The KIPS Transactions:PartA
• /
• v.15A no.3
• /
• pp.141-149
• /
• 2008

In this research we present a novel method which combines and visualizes the design model and the FDM-based simulation result of solidification. Moreover we employ VR displays and visualize stereoscopic images to provide an effective analysis environment. First we reconstruct the solidification simulation result to a rectangular mesh model using a conventional simulation software. Then each point color of the reconstructed model represents a temperature value of its position. Next we map the two models by finding the nearest point of the reconstructed model for each point of the design model and then assign the point color of the design model as that of the reconstructed model. Before this mapping we apply mesh subdivision because the design model is composed of minimum number of points and that makes the point distribution of the design model not uniform compared with the reconstructed model. In this process the original shape is preserved in the manner that points are added to the mesh edge which length is longer than a predefined threshold value. The implemented system visualizes the solidification simulation data on the design model, which allows the user to understand the object geometry precisely. The immersive and realistic working environment constructed with use of VR display can support the user to discover the defect occurrence faster and more effectively.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.233-233
• /
• 2011

This study describes the characteristics of accretion and scour around artificial reefs in Korea. The survey for accretion and scour was made at a dice reef set consisting of 137 dice reefs. The volume of a dice reef unit is 8 $m^3$. The reef set was placed on the muddy sand at 21.6 m in November of 1999. Equipment used in the survey includes Side Scan Sonar, Multi Beam Echo Sounder, Sub-Bottom Profiler and water current meter. According to the results, the artificial reefs are heaped up at two to three times (4 m) the height of the dice reef. The maximum current around the artificial reefs was 81.5 cm/sec at the ebb tide and 72.7 cm/sec at the flood tide. Scour around artificial reefs occurs upstream to the flow while accretion is formed at wake zone in the downstream. The height of accretion ranges from 2.4 to 3.0 m. The crest of the accretion is formed at the distance of about 10 m from the edge of the reef. The slope of accretion is formed steeply at the vicinity of the reef which is at right angles to the direction of main current, and grows gently lower with the increased distance from the reef. Scour is continuously caused by upwelling from the reef set and by side currents that flow parallel to side of the accretion. Also, scour takes place on the deposited sediment rather than on the remaining bottom sediments. This means that, once fully formed, the depth of scour gully on both sides to the direction of main current hardly changes.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.13-22
• /
• 1998

To know the features of Amyloodinium sp. parasitized in Black seabream, Acanthopagrus schlegeli, morphology and reproduction type of the parasite were investigated. Infection mode and histopathology of the parasites were also studied. In the developmental and morphological observation, the parasite passed through parasitic and non-parasitic phases with three developmental stages termed trophont, tomont, and dinospore. The trophont, 30-$80{\mu}m$ ovoidal or pyriform, for the vegetative stage had a spherical nucleus with $1.5{\mu}m$ in diameter, many food vacuoles and starch grains in cytoplasm. The tomont, 80-$90{\mu}m$ spherical, for the reproductive stage resorbed a stalk, secreted a cyst wall and reproduced within it. A dinospore, small 10-$15{\mu}m$ biflagellated, for the infestation stage had a stigma. The parasite was propagated for 15 days by serial passage in Korean rockfish (Sebastes schlegeli) at $25{\pm}1^{\circ}C$. Trophonts began to detach from the fish about 3 days after infection and was completed within 5 days at $25{\pm}1^{\circ}C$. It took from 3 to 5 days to reproduce at the same temperature. Reinfected fish showed that parasites penetrated under the epithelia of gill filament and gill lamellae causing hyperplasia and degeneration at infected area.