• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.193-196
• /
• 2003

시공간 빔포밍 기술은 기존의 배열 안테나가 공간만의 처리를 해온 것에 대하여 이를 시간 영역으로까지 확장하여 특정한 방향에서 특정한 시간에 도착하는 다중경로는 증폭하고 다른 다중경로는 제거하는 것을 의미한다. 본 논문은 배열 안테나를 가진 DS-CDMA에서 시스템 파라미터 부정합이 존재할 때, 시공간 빔 형성기의 성능에 대하여 연구하였다. 시뮬레이션 결과, 부정합이 존재할 때 전통적인 빔포머가 상대적으로 강인함을 보였지만 원근 문제는 해결할 수 없었으며, 실제의 추정 결과를 적용했을 때는 MUSIC 시공간 빔포머가 가장 우수한 성능을 보였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.49-59
• /
• 2005

An adaptive hybrid beamformer is proposed to improve the reception performance of the advanced television system committee (ATSC) digital television (DTV) in a mobile environment. Dynamic multipaths and Doppler shifts severely degrade the reception performance of the ATSC DTV receiver. Accordingly, a hybrid beamformer, called a Capon and least mean square (CLMS) beamformer, is presented that uses direction of arrival (DOA) information and the least mean square (LMS) beamforming algorithm. The proposed CLMS algerian efficiently removes dynamic multipaths and compensates for the phase distortion caused by Doppler shifts in mobile receivers. After the CLMS beamformer is operated, the subsequent use of an equalizer removes any residual multipath effects, thereby significantly improving the performance of DTV receivers. The performances of the proposed CLMS, Capon, and LMS beamformersare compared based on computer simulations. In addition, the overall performance of the CLMS beamformer followed by an equalizer is also considered.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.3-8
• /
• 2013

Conventional MMSE beamforming scheme shows better performance than ZF or MF beamforming, but it does not aim increase of sum rate. This paper proposes sum rate maximizing scheme by representing sum rate as a function of weighted MSE. Proposed scheme increases sum rate iteratively by updating weights and beam whose initial form is conventional MMSE beam. Simulation result shows sum rate of proposed scheme is higher than those of conventional schemes and increases as the number of users increases.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.141-144
• /
• 2004

수중 음향 탐지 시스템에서 빔 형성 기법은 오랫동안 많은 연구자들에 의해 연구되어 왔다. 빔 형성 기법은 탐지성능에 직결되기 때문에 최적의 빔 설계는 중요한 문제가 된다. 그리고 최적의 빔 형성기를 구현하기 위해서는 개별 센서에 대한 가중회로의 구성이 필수적이며, 가중회로를 구성하기 위해서는 개별 센서에 대한 등가회로 모델링과 정합회로 설계가 필수적이다. 이전의 연구에서는 센서 등가회로 모델링 Tool과 정합회로 디자인 Tool 각각의 구성과 사용방법에 대해서 소개하였다. 본 논문에서는 이 두 가지 Tool을 모두 이용하여 센서 등가회로 및 정합회로를 모델링하였고, 이를 바탕으로 실제 가중회로를 구현하였다. 실험을 위해 물-공기의 상사효과를 가정하였으며, 공기 중에서 스피커 어레이를 이용하여 빔 형성을 하였다. 또한, 이론치와 실험치를 비교하여 BeamCAD, 센서 등가회로 모델링 Tool 그리고 정합회로 디자인 Tool로 이루어진 소나 센서 디자인 Tool의 타당성을 검증하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.123-129
• /
• 2018

Recently, as required wireless communication traffic increase, millimeter wave mobile technologies that can secure broadband spectrum are gaining attention. However, the path loss is high in the millimeter wave channel. Massive MIMO system is being researched in which can complement the path loss by beamforming by equiped large-scale antenna at the base station. While legacy beamforming techniques have analog and digital methods, practical difficulties exist for application to massive MIMO systems in terms of system complexity and cost. Therefore, this paper studies a hybrid beamforming scheme for massive MIMO system in the millimeter wave band. Also this paper considers spatial multiplexing scheme to serve multi-users with multiple received antennas. Gains of the beamforming and the spatial multiplexing schemes are evaluated by analyzing the spectral efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.318-324
• /
• 2011

In this paper, three coordinated random beamforming (CRBF) schemes are analyzed in a two-cell symmetric interference channel. A simple partial coordination of RBF with base station selection (BSS) is shown to achieve the same average sum rate performance of CRBF with joint encoding (JE). To improve the sum rate performance further, we also propose a transmission mode selection (TMS) between the BSS and JE which is shown to have additional sum rate gain for the large number of users. Simulation results verify the eectiveness of the proposed CRBF schemes and accuracy of the proposed analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1677-1688
• /
• 1998

In this paper, we analyze the performance of a DS-CDMA system employing adaptive adaptive array antenna technology at base-station. For the analysis the receiving architecture of a multiple team adaptive base-station array antenna is proposed as a major system omponent, and signal to interference and noise ratio(SINR) on the proposed architecture is developed. We show that the perfomance enhancement of the CDMA system is represented as great reduction of interfreence by employing an array antenna capable of resolving the angular distribution of the mobile users as seen at the ase-station. The energy associated with each mobile or a group of mobiles is thus confined within the addressed volume, greatly reducing the amount of co-channel interference experienced from and by neighboring co-channel cells. In order to ascertain the benefits of such an antenna, a theoretical approach, which eis based on the conventional and proposed antenna systems in a typical mobile radio environment, is adopted. Finally computer simulation results show the insight into how the adaptive array antenna operates when used in conjunction with DS-CDMA and illustrate the potential benefits in the SINR point of view.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.303-311
• /
• 2011

In this paper, we propose the adaptive multibeamforming algorithm to remove the same subcarrier interference and multipath signals in the MIMO(Multi-Input Multi-Out)-OFDMA (Orthogonal Frequency Division Multiplexing Access)system allocated the same subcarrier partially in order to improve spectrum efficiency. In addition to removing the interference, we can get diversity gain and combat the detriment of the performance according to time delay by the proposed approach. BER performance improvement and combating the delay spread detrimental effects of the proposed approach is investigated through computer simulation by applying it to MIMO-OFDMA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.86-92
• /
• 2011

This paper details the downlink performance analysis of an multiple antennas system that combines adaptive beamforming and spatial multiplexing (SM) Multiple Input Multiple Output (MIMO). The combination of MIMO signal processing with adaptive beamforming is applied to WiBro, the South Korean Orthogonal Frequency Division Multiple Access (OFDMA) system that follows the IEEE 802.16e standard. Performance analysis is based on the results of experiments and simulations obtained from a fixed-point simulation testbed. Simulations demonstrate that the MIMO Beamforming OFDMA system improves the required signal to noise ratio (SNR) over the conventional MIMO OFDMA system by 3 dB (QPSK) / 2.5 dB (16-QAM) for the frame error rate (FER) of 1% in the WiBro signal environments. From the implementation of the fixed-point simulation testbed and its experimental results, we verify the feasibility of the MIMO Beamforming technology for realizing a practical WiBro base station.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.449-456
• /
• 2018

Herein, several multibeam forming methods that can be applied to microwave wireless power transmission are presented. Because the conventional multibeam forming methods do not consider an active element pattern(AEP), an intended beam shape will contain a steering angle error when applied to an actual system. To solve this problem, a method of considering the average of the AEP and a method of considering all the AEPs by the modified Fourier series method have been proposed. We confirmed that the proposed method reduces the error with the intended beam shape in the multibeam formation. In addition, for the side lobe level(SLL) and null control, a method of multibeam forming by applying the superposition principle to the Dolph-Tschebyscheff method is proposed. We also confirmed that SLL control can be simultaneously achieved with the multibeam formation.