• The Journal of the Acoustical Society of Korea
• /
• v.30 no.8
• /
• pp.474-481
• /
• 2011

Conventional beamforming is ineffective in producing directional information in system with sparse degree of the freedom such as DIFAR (DIrectional Frequency Analysis and Recording) sonobuoy and in the presence of high directional noise. In this paper, Adaptive beamforming techniques are applied to produce directional spectra from a small number of sensors in highly directional noise environment. Conventional method as well as minimum variance and eigenvectors as adaptive method are evaluated via numerical test and real data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.845-852
• /
• 2019

The main goal of Signal Intelligence (SIGNT) based on a satellite is to collect valid and accurate data without the topographical constraints, but, due to the characteristics of the satellite communication, the collected signals are greatly vulnerable to the influence of interference and jamming signals because their power are very low. Therefore, the high performance techniques of estimating the angle of arrivals (AOAs) of the collected signals and suppressing interference signals are required for collecting various signals on the ground employing the satellite. In addition, the high quality of the transmission beam-forming technique is required for accurately transmitting the collected information to a ground control center. In this paper, we present a beam-forming satellite system based on a circular array antenna, considering the above techniques, and evaluate and analysis the performance of the presented beam-forming system through the computer simulation. The circular array antenna structure is expected to effectively employ for the SIGINT system based on a satellite, because it is suitable to be installed in the satellite.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.420-423
• /
• 1998

최근 이동 통신이나 위성통신과 같은 많은 디지털 통신 시스템에서 시스템의 용량을 증가시키고 인접 채널간 간섭을 줄이기 위해 많은 연구가 진행되고 있으며, 그 중에서 어레이 빔 형성 기법에 대한 연구가 활발하게 진행되고 있다. 이에 본 논문에서는 원하는 신호의 입사방향을 모르더라도 정상 동작이 가능한 블라인드 빔 형성 기법 중에서 신호의 cyclostationarity를 이용한 방법을 사용하여 원하는 사용자 신호의 cyclic 주파수만큼 천이된 신호와 수신신호 사이의 상호상관 행렬을 구하고 이를 이용하여 계수벡터를 구하는 알고리즘을 제시한다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.637-646
• /
• 2022

Sub-arrays of arbitrary conformal array have different geometric shape through steering direction, thus the beam patterns of sub-arrays are always non-uniform. In this paper, we apply the beam pattern synthesis method using convex optimization into the conformal array, and shows the improvement of uniformity of beam performance. The simulation is performed with the conformal array of cut-sphere shape. As a result, the standard deviation of 3 dB beamwidth in elevation is greatly reduced but the directivity index is also reduced. To alleviate this trade-off, we propose a convex optimization using a shading function.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1271-1277
• /
• 2008

This paper proposes the code acquisition scheme on a MIMO channel for preamble search in a CDMA-MIMO uplink system. The multiple transmit/receive antennas are used for beamforming. The performance of a ML code acquisition technique based on transmit and receive beamforming is analyzed by considering rho detection probability. The acquisition performance and MAT for a MIMO code acquisition system are numerically evaluated. It is shown that multiple transmit antennas can give the code acquisition system a transmit beamforming gain and result in much better performance than a SIMO case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.861-869
• /
• 2011

In this paper, we propose coordinated scheduling and beamforming based on limited feedback to overcome the effects of inter-cell interference in multi-cell environment. The goal of this study is to improve a performance of cell-edge area significantly affected by the inter-cell interference and also to guarantee a performance of the entire system. Existing coordinated scheduling and beamforming based on the perfect channel state information generates an overhead for the channel state information feedback and exchange at the users and base stations, respectively. In this study, first we propose a novel codebook to obtain a null space of an interference channel efficiently which can be used to reduce the inter-cell interference. Using the proposed codebook, we propose coordinated scheduling and beamforming to improve the performance of cell-edge area and the entire system. Through the proportional fair scheduling, the performance of the proposed technique is shown as improvement of channel capacity for users located cell-edge area and entire system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.1-8
• /
• 2007

In this paper, the new beamforming is proposed for an orthogonal frequency division multiplexing(OFDM) system with multi-input multi-output(MIMO). Through the proposed Pre-FFT beamforming technique for MIMO-OFDM, the multibeams are formed toward each multi-transmitter antenna of the desired user. The proposed beamforming for MIMO-OFDM can reduce cochannel interference and get diversity gain in the multi-user environment. Therefore, the performance of MIMO-OFDM system is very improved. BER performance improvement of the proposed approach is investigated through computer simulation by applying it to MIMO-OFDM system in the multi-user environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.424-434
• /
• 2015

Adaptive beamforming algorithms have been widely used to remove interference and jamming in the phased array radar system. Advances in the field programmable gate array(FPGA) technology now make possible the real time processing of adaptive beamforming (ABF) algorithm. In this paper, the FPGA based real-time implementation method of adaptive beamforming system(beamformer) in the pre-processor module for active electronically scanned array(AESA) radar is proposed. A compact FPGA-based adaptive beamformer is developed using commercial off the shelf(COTS) FPGA board with communication via OpenVPX(Virtual Path Cross-connect) backplane. This beamformer comprises a number of high speed complex processing including QR decomposition & back substitution for matrix inversion and complex vector/matrix calculations. The implemented result shows that the adaptive beamforming patterns through FPGA correspond with results of simulation through Matlab. And also confirms the possibility of application in AESA radar due to the real time processing of ABF algorithm through FPGA.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.67-72
• /
• 2004

In this paper, we propose a downlink beamforming method which is considered common pilot channel for coherent detection and dedicated traffic channel for desired user in FDD/CDMA systems. The existing downlink beamforming system produces phase mismatch between traffic and pilot signals at desired mobile as well as interference to other mobiles. A new downlink beamforming method can solve above problem based on least squares method between reference function and beamforming function. A numerical analysis shows that the proposed downlink beamforming method matches well and gives low BER performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.448-458
• /
• 2013

In this paper, we present the performance and the experimental results of the adaptive beamformer in the radar system with the planar active array. The study of the adaptive beamformer has already been performed in several literatures, but it is difficult to find the results or examples those are implemented in the actual radar system. Here we employ the adaptive beamformer to the practical radar system with subarray architecture. The performance of beamformer will be demonstrated by modeling and simulation and finally the far-field experimental results.