• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.617-624
• /
• 2021

The accurate estimation of the number of signals included in the received signal is required for the AOA(: Angle-of-Arrival) estimation, the interference suppression, the signal reception, etc. AIC(: Akaike Information Criterion) and MDL(: Minimum Description Length) algorithms, which are known as the typical algorithms to estimate the signal number, estimate the number of signals according to the minimum of each criterion. As the number of antenna elements increased, the estimation performance is enhanced, but the computational complexity is increased because values of criteria for entire antenna elements should be calculated for finding their minimum. In order to improve this problem, in this paper, we propose AIC and MDL algorithms based on the beamspace, which efficiently estimate the number of signals while reducing the computational complexity by reducing the dimension of an array antenna through the beamspace processing. In addition, we provide computer simulation results based on various scenarios for evaluating and analysing the estimation performance of the proposed algorithms.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.308-314
• /
• 1997

We have studied the generation of an array of dark spatial solitons in a self-deforcusing medium. Unlike a single fundamental dark spatial soliton, we show numerically that the generation of an array of dark spatial solitons from a spatially sinusoidal input beam needs an adiabatic amplification of nonlinear refractive index with the beam propagation distance. In experiment, we establish a Mach-Zehnder interferometer for making the sinusoidal input beam and use a cylindrical lens for the adiabatic amplification. We observe that the dark soliton's dip-width becomes narrower and the background intensity distribution becomes flatter with increasing the nonlinearity.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.48-54
• /
• 2001

We investigate the generation of the dark spatial soliton and its role of wave guiding in Fe doped$LiNbO_3$ A cw Ar+ laser of 488 nm is used for the generation of the dark spatial soliton. The generation of the dark spatial soliton is observed even at the laser intensity as low as 10 mW/cm2. The self-defocusing effect is observed when the direction of the intensity variation is parallel to the optic axis, while it can't be seen when perpendicular to the axis. So, it is verified that the refractive index change is generated parallel to the optic axis. When 633 nm He-Ne laser beam is injected into the dark spatial soliton, the beam propagates just as in the diffraction free medium. So, it is verified that the dark spatial soliton can act as a waveguide.eguide.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.245.1-245.1
• /
• 2014

교차하는 전기장과 자기장으로 플라즈마를 방전하고, 이온 빔을 효과적으로 가속하는 원형 이온 빔 소스를 개발하였다. 방위각 방향으로 비대칭적인 중성 가스와 전자 빔의 공급으로 이온 빔 소스에서 불안정하고 불균일한 플라즈마가 방전되어, 이온 소스의 효율을 저하시킨다. 본 연구에서는 플라즈마 이미지를 이용하여 이온 소스 내부에서의 중성입자 밀도 분포를 측정하는 방법을 개발하였다. 자기장의 방향이 서로 다른 방전조건에서 얻어지는 한 쌍의 플라즈마 이미지로부터 티코노프 정형화 기법을 이용하여 방위각에 대한 중성입자의 밀도 분포를 재구성한다. 본 재구성 기법을 이용하여 얻어진 밀도 분포는 유체흐름 등가회로 모델을 바탕으로 한 수치해석을 이용하여 분석하였다. 중성입자 밀도의 공간분포는 인가 전압, 자기장의 세기 및 유량과 같은 방전조건의 변화에 크게 영향을 받지 않고, 가스 공급부의 내부 구조에 의해 결정되는 것을 확인하였다. 또한, 등가회로 모델을 이용하여 균일한 공간분포를 얻기 위한 공급부 설계를 수행하였다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.371-376
• /
• 2000

For multi-hologram recording especially in a dIsk-shaped storage medium. we had studied a simple cost-effective method to unplement the rotational, angular, and ,patial multiplexmg techniques together in order to enhance the area storage density. Holographic storage with both rotational and angular multIplexing was realized by controlling the rderence beam directly with a pair of wedge prisms. whlie the storage WIth spatIal multlplexmg by shIfting the storage medium. In thIS paper \ve show that lhe area storage density of our system is strongly dependent on f numbers of the lenses in the srgnal and reference anns, and also show that the area storage densrly becollles maximal when the f number of the lens in the signal arm is approximately twice as long for a given f number of the lens in the reference emn. e emn.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.956-966
• /
• 1997

Dynamic free-space optical interconnection system is experimented by a holographic crossbar with single-state switching architecture. For dynamic operation, electrically addressed liquid-crystal spatial light modulator and diffraction gratings are used in place of passive holograms of matrix-matrix crossbar. Diffraction gratings are consisted of regular cells which have different phase delays. This pixelated phase grating array displayed on SLM(Spatial Light modulator) deflects an input beam toward a wanted direction or splits an input beam into many beams and then steers them to desired positions. Through the experimental results, free-space optical interconnection is dynamically perfomed using a computer, SLM and phase diffraction gratings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.2
• /
• pp.77-85
• /
• 2014

Recently, utilization of MIMO(Multi-Input Multi-Output) system using array antennas is evaluated significantly according to the extension of high-capacity and high-speed communication services. However, MIMO system has disadvantages such as high-complexity and high-power-consumption, because RF(Radio Frequency) chain is required as antenna number, and several array antenna is used in conventional MIMO system. In order to solve these problems, research about beamspace MIMO system using ESPAR(Electronically Steerable Parasitic Array Radiator) antenna that has single RF chain by using one active antenna and several parasitic elements has been studied actively. Beamspace MIMO system using ESPAR antenna is possible to solve the problems of conventional MIMO system, because this system is composed by single RF chain. In this paper, in order to improve the system security, chaos communication algorithm that has characteristics such as non-periodic, non-predictability, easy implementation and initial condition is applied to QPSK (Quadrature Phase Shift Keying) modulated beamspace MIMO system. We design the chaos QPSK modulated beamspace MIMO system, and evaluate SER performance of this system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.3B
• /
• pp.280-287
• /
• 2001

본 논문에서는 기존의 LCD MW를 이용한 각 다중화 시스템에서 인접한 수직방향 MW 사이의 crosstalk를 제거하기 위하여 MW의 뒷단에 수직방향으로 주기적으로 서로 다른 초점 길이를 갖는 이중초점 렌즈를 삽입하여 인접한 MW의 기준빔이 서로 다른 공간에 기록되게 함으로써 기준빔의 전자적 제어뿐만 아니라 고밀도의 정보저장 및 복원이 가능한 새로운 공간-각 다중화 기법을 제안하고 이에 대한 광학 실험을 통해 구현가능성을 제시하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.208-217
• /
• 2013

When a beamforming can be processed separately in horizontal and vertical directions with the planar arrays used in sonar systems, there are several merits such as that practically reduce the required computations and volumes. However, the common planar arrays used in sonar systems are generally non-separable, so the beamforming with separable weighting results in the differences between the desired beam characteristics and the resultant beam characteristics. In this paper, we propose a new separable weighting method which can achieve the wanted beam characteristics by using the separable weights in horizontal and vertical directions for the non-separable planar arrays. In order to achieve the wanted beam characteristics, the proposed method minimizes the differences between the desired weights and the resultant weights based on the number of effective sensors in horizontal and vertical directions of the planar arrays.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.