• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.583-593
• /
• 2018

Lightning causes physical damage to aircraft, such as melting, burning and arcing, and magnetic field that occurs on the aircraft's outer body during the penetration of a lightning stroke causes voltage and current transients in the electronics and wiring within the aircraft. This effect will cause induced lightning strikes in the aircraft's internal airborne electronic systems, preventing safe flight. This paper introduces protection circuit design techniques, and the test results that meet the requirements for certification of criteria.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.32.4-33
• /
• 2011

관제시뮬레이터는 위성운용의 준비 및 위성운용 기간 동안의 운용절차의 검증, 지상관제 시스템의 시험, 운영자의 교육 및 훈련 등을 목적으로 활용될 수 있다. 시뮬레이터는 보통 운영체제, 미들웨어, 시뮬레이션 기반소프트웨어, 에뮬레이터 및 위성과 외부 환경의 모델링 부분으로 구성된다. 에뮬레이터는 위성의 비행소프트웨어의 이미지를 어떤 수정없이 실제적으로 실행할 수 있게 한다. 위성의 모델링 부분은 시뮬레이터의 운용목적에 맞는 각종 하드웨어와 기능들에 대해서 수학적 방정식 등을 이용하여 위성 및 외부환경을 실제적으로 모델링하는 부분으로 구성된다. 이외에 시뮬레이션의 제어 및 관리와 사용자 접속부분을 관리할 수 있는 모듈들이 추가적으로 구성된다. 시뮬레이션 기반소프트웨어는 이러한 시뮬레이션 구성요소(Component)들을 사용자 환경설정 파일에 기반하여 통합하여 구현 및 운용할 수 있는 환경을 제공한다. 구현되는 시뮬레이터의 틀(Framework)로써 모듈간 각종 데이터의 표준 입출력, 일반적인 모델 등을 제공한다. 운용되고 있는 세계 각국의 위성 시뮬레이터에서 SIMSAT, SIMWARE 등의 시뮬레이션 기반소프트웨어가 활용되고 있으며, 관제시뮬레이터가 개발될 경우 기반소프트웨어의 자체개발 또는 기존 상용제품 활용의 여부가 우선적으로 결정되어야 할 것이며, 또한 기존 상용제품 활용 시 각 기반소프트웨어의 특성을 분석하여 적절한 기반소프트웨어의 선택이 결정되어야 할 것이다. 이 논문에서는 시뮬레이션 기반소프트웨어의 기능 및 현재 활용되고 있는 상용제품의 특성에 대해서 분석비교를 기술한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.92-98
• /
• 2006

An 1 lbf of NASA standard monopropellant thruster, MRE-1, is used for KOMPSAT (Korea Multi-Purpose Satellite) which is launched in 2006 and provides reliable and cost-effective means for attitude and maneuvering control system. The monopropellant thruster obtains required thrust by thermal decomposition process of propellant through catalyst bed. During firing, the decomposition plays a role of a heat source that may occur an excessive radiation heat transfer to peripheral structures and electronics in relatively low temperature condition.Therefore, the radiation heat shield is needed to prevent the critical radiative heat exchange between thruster and satellite during firing. This paper summarizes an overall development process of radiation heat shield from the design engineering up to the manufacturing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.191-195
• /
• 2006

It is definitely required to control dispersion of the rocket engine performance in order to accomplish the mission of a launch vehicle successfully. A performance dispersion analysis was conducted for a gas generator cycle liquid rocket engine and the required pressure drops were estimated for engine tunning. As a result, the vacuum thrust dispersion of the engine was from +9.1% to -8.7% and the mixture ratio deviated from +9.7% to -9.6% from the nominal value due to the errors of components and the engine inlet condition of propellants. The required pressure drop in the LOx line to the combustor is higher than in the fuel line for same mixture ratio change.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.158-168
• /
• 2012

This paper deals with TVC nozzle stroke verification test and corresponding analysis techniques related to kick motor TVC system of KSLV-I second stage. It is shown that the relationship between TVC stroke and potentiometer voltage is revealed via the open-loop stroke verification test, and other major operational parameters including nozzle alignment error, actuation error, neutral position, radius of nozzle rotation, location of nozzle rotation center, angle conversion coefficients, etc. are analyzed via the closed-loop stroke verification test. The TVC stroke verification test results for the first and second flight model of KSLV-I show that all TVC operational parameters of KSLV-I second stage were normally setup for the first and second flight tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.109-117
• /
• 2006

Hot firing performance test of hydrazine decomposition catalyst used for monopropellant thruster of satellite and launch vehicle was performed on the ground. A test equipment for hot firing performance measurement of catalyst test was developed in collaboration with Hanwha Corp., and the catalyst firing performance were tested with the equipment. After a reaction delay time, a catalyst activity and a granule stability were measured for 2 times, satisfactory results were obtained such as 25msec, 2%, $704^{\circ}C$ for each test items on the average. In addition, the current development status of domestic prototype catalyst and its decomposition performance test results are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.77-86
• /
• 2003

Dynamic response of baffled fuel-storage tank in turnaround motion is simulated using the ALE finite element method. Fuel-storage tank undergoes abrupt impact load caused by inertia force of internal fuel in turnaround motion. Also, large dynamic force and moment caused by this load influence structural stability and control system. In this paper, ring-type baffles are adopted to suppress the dynamic influence. Through the parametric analysis with respect to the baffle number and location, the effects of baffle on the dynamic response of baffled fuel-storage tank is analyzed. The ALE finite element method is adopted for the accurate and effective simulation of the hydrodynamic interaction between fluid and structure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1071-1078
• /
• 2018

In this paper, we implemented community driving system for auto-vehicles as a preceding research of drone's community flight. We used ultrasonic sensors in order to measure the distance between vehicles, and designed each vehicles to maintain specific distance to each other, by making the following vehicle to stop moving when the distance is closed to less than 20cm, to start moving when the distance increases to more than 30cm. We have also designed vehicle to accelerate until the distance is closed to 30cm when they are apart for more than 40cm due to contingencies during driving.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.310-313
• /
• 2008

Magnetohydrodynamics (MHD) devices have received considerable attention in recent years as a means to either improve the propulsive characteristics of hypersonic cruise missiles or as a means to generate power at low cost in drag and weight aboard scramjet powered vehicles. Based on more complete physical models than previously used, it is here argued that the use of MHD is not valuable in improving the performance of hypersonic propulsion systems through prevention of boundary layer separation or power bypass. This is due to the inevitable high amount of Joule heating accompanying MHD flow control having considerable undesired adverse effects on the engine performance. On the other hand, preliminary estimates indicate that MHD is likely to succeed in generating high amounts of power with little additional drag to feed megawatt-class energy weapons on-board scramjet engines.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.97-105
• /
• 2019

With the possibility of wireless control of the aircraft by Nicola Tesla, Unmanned Aerial Vehicle(UAV) was mainly used for military and defense purposes with the rapid development through World War I and II. As civilian applications of unmanned aerial vehicles have expanded, they have been used with various services, and attempts have been made to control various environmental changes and risk factors of unmanned aerial vehicles. However, GPS spoofing, Jamming attack and security accidents are occurring due to the communication in the unmaned aerial vehicle system or the security vulnerability of the unmanned aerial vehicle itself. In order to secure introduction of Unmanned aerial vehicle, South Korea has established Unmanned Aerial Vehicle verification system called Airworthiness Certification. However, the existing cerfication system is more focused on test flight, design and structure's safety and reliability. In this paper, we propose a unmanned aerial vehicle system model and propose security functional requirements on unmanned aerial vehicle system in the corresponding system model for secure-introduction of Unmanned Aerial Vehicle. We suggest the development direction of verification technology. From this proposal, future development directions of evaluation and verification technology of Unmanned Aerial Vehicle will be presented.