• Korean Journal of Social Welfare
• /
• v.54
• /
• pp.99-121
• /
• 2003

The purpose of this study is to explore the process that youths get involved in delinquent behavior after runaway. The experiences of runaway youths are studied interpretively, so that interactive features between situations and the youths are revealed. In this way, it is expected that directions in social services to prevent and intervene with delinquent behaviors of runaway youths can be suggested. Eleven youths who have experienced running-away participated in the in-depth interviews. Their narratives are interpreted through the procedures of interpretive interactionism by Denzin(1989). Five phases of the delinquency process have been discovered: Using personal resources, getting help from new relationships, exploring alternatives to survive, learning delinquent way of living, and living independently through delinquency. Interpreted contextually, it has been founded that delinquency is a behavior to survive and a developmental process on the street, taking place in a situation of blocked communication, nevertheless within people's networks. Thus, it is suggested that the problem of runaways are not to be treated narrowly as responsibilities of the youths themselves or their families, but to be approached from the viewpoint of providing social service systems that work as a safety network and offer alternatives for the youths to survive, to resolve their troubles, and to keep healthy lives.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.51-57
• /
• 1999

Temperature and velocity controlling of air at inlet position of Ramjet combustor is important under Ramjet engine grounding-test condition since temperature of inlet air increases due to compression process by supersonic flow at inlet position of Ramjet combustor. In this study, Vitiated Air Heater methodology was used to control temperature of air that is inducted into Ramjet combustor. Temperature and velocity of air at Vitiated air heater exit, which is inducted into Ramjet combustor, were measured to evaluate Vitiated air heater system developed in this study. It is shown that temperature and velocity of inducted air can be well controlled using Vitiated air heater system developed in this study, and we could make a Vitiated Air which is almost same with real air.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.383-388
• /
• 2021

Air-breathing engines used in aircraft have a performance limit as the altitude increases, and this determines the service and absolute ceiling altitude. The method of maintaining altitude and speed in a fixed-wing aircraft in level flight using classical control method is generally using thrust for speed increase/deceleration and pitch attitude for altitude increase/decrease. If this method is used near the service ceiling altitude, increasing the pitch to reduce the altitude error results in a speed reduction. Therefore, it is necessary to use a control method that maintains the speed first using the pitch attitude. Especially in the case of unmanned aerial vehicles, these two methods should be automatically available at the right time. In this paper, we propose a method of switching the speed and altitude maintenance algorithm near service ceiling altitude.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.62-68
• /
• 2012

In this paper, we propose an efficient transmission scheme for flight data. It is important to reduce amount of flight data transmitted effectively for timely transmission in airplane that the safety is very importantly recognized. Thus, this paper shows the improved technique transmitting after compressing flight data by the lossless compression technique. Because the proposed method improves the transmission speed of the flight data effectively. The processing of flight data and handling can be easily performed in the time to be restricted. The simulation results show that the proposed scheme achieves 25% data transfer gain compared to the ARINC 429 based transmission method.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.141-148
• /
• 2011

LEO satellites have many heaters for thermal control, such as bus module heaters, payload heaters and battery internal heaters. Some of these heaters are controlled by thermisters, and others can be controlled by flight software. These heaters are divided into various types of group according to the location, telemetry variables, flight software logic, power distribution, etc. Thus, it is difficult to find out which heaters are included in a certain group and modify heater control logic for a new/other software developers. This document describes about the general/special control logic for satellite heaters and groups/arrays for heaters.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.266-267
• /
• 2017

A numerical investigation of the stage separation behavior of two-body vehicle focusing on its flow characteristics were carried out. For this simulation, separation of a booster from vehicle was modeled by a chimera grid system and calculated by using commercial code, CFD-FASTRAN$^{TM}$. Consideration of a spring force, gravity and relative acceleration of a booster was the essential factor that simulates the realistic situation. In this study, It was validated that the booster separation time decreases with increase in flight mach number and angle of attack. In view of the results so far achieved, it was expected that the dynamics modeling and boundary condition set up applied in this study will be helpful in a estimation of a safe stage separation and event sequence of flight test.

• Journal of Platform Technology
• /
• v.10 no.4
• /
• pp.62-69
• /
• 2022

Flight control systems installed on unmanned aircraft require thorough verification from the design stage. This verification is made through the integrated flight control test environment. Typically, a debugger is used to monitor the internal state of a flight control computer in real time. Emulator with a real-time memory monitor and trace is relatively expensive. The JTAG Emulator is unable to operate in real time and has limitations that cannot be caught up with the processing speed of latest high-speed processors. In this paper, we describe the results of the development of internal monitoring software for drone flight control computer processors based on NUTTX/PIXHAWK. The results of this study show that the functions provided compared to commercial debugger are limited, but it can be sufficiently used to verify the flight control system using this system under limited budget.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.584-585
• /
• 2017

본 연구는 드론 운송시스템에서 드론에 적재되어 있는 화물의 무게에 따른 비행가능거리의 변화를 운송 경로 문제에 적용시킨다. 드론에 적재된 무게에 따른 비행속도와 비행가능거리를 실험을 통해 사전에 수집하고, 이를 고려한 적합도 함수를 유전 알고리즘에 적용한다. 실험 결과 드론의 평균비행가능거리만을 이용한 것 보다 총소요시간을 단축시켜 효율적인 드론 운송시스템의 적용이 가능할 것이다.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.7-16
• /
• 2005

Rejected Takeoff Accidents are not common. but if occurred, it leads to big disaster From the year of 1959, when Jet Transport service opened, to the year of 2000, Rejected Takeoff accidents/incidents occurred total of 94 cases. All cases led to overrun, and major cause is to initiate stopping maneuvers over $V_1$, takeoff decision speed, according to National Transport Safety Board of America. Similar results are represented in Aviation Safety Reporting System of National Aeronautics and Space Administration. So I believe that it is worth studying if Airplane Flight Manual, which is the reference Performance criteria, is appropriate to operations of line pilots. The definition of $V_1$ has been revised a couple of times and Rejected Takeoff Certification Standards for Transport Airplanes was changed in 1998. It shows that up to now there are some portions unreasonable. This study focused on gathering the pilot's tendency for current Rejected Takeoff Procedures of K airlines and analyze the factors they concern. I chose B777 airplane and actually measured the recognition and reaction time of the rejected takeoff transitions through Simulators. And compared the results with the data of flight test and Airplane Flight Manual.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.359-367
• /
• 2018

The vortex ring state that occurs during the descending flight of a rotorcraft generates a circulating flow like a donut near the rotating surface, and it often causes a rotorcraft fall due to loss of thrust. In this paper, we have physically identified the flow field in the vortex ring state of the quadcopter, one of the types of unmanned aerial vehicles. The descending flight of the quadcopter was simulated in a 1m subsonic wind tunnel of the Korea Aerospace Research Institute(KARI) and the Particle Image Velocimetry(PIV) was used for the flow field measurement. The induced velocity in the hovering state is estimated by using the momentum theory and the test was carried out in the range of descent rate at which the vortex ring condition could be caused. The development and the direction of the vortex ring were confirmed by the measurement of the flow field according to not only the descent rate but also propeller separation distance. In addition, the results of the study show the vortex ring state can be predicted sufficiently by measuring the flow velocity around the quadcopter.