• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.899-907
• /
• 2022

According to the Unmanned aircraft system Traffic Management (UTM), drones are permitted to fly up to 150m above ground, which is located in the atmospheric boundary layer where there is considerable wind fluctuation due to turbulence. Although it is difficult to predict when turbulence will occur drone aviation safety could be enhanced by having a better understanding of the characteristics of vertical profile of wind in the flight area. We used wind lidar (WIndMast 350M) to observe vertical profiles of wind at the test site for aviation meteorological observation equipment located near Incheon International Airport in July and September, 2022. In this study, we utilized the observed wind profile data to propose a technique for obtaining information that could help improve the drone aviation safety. The Fourier transform analysis is used to evaluate the temporal characteristics of the horizontal wind speed at various vertical levels up to 350m. We also examined the relative contribution of the variance of wind having scales of less than an hour, a crucial scale for drone flight, to the variance of wind having all scales at each vertical altitude for days with and without precipitation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.383-388
• /
• 2021

Air-breathing engines used in aircraft have a performance limit as the altitude increases, and this determines the service and absolute ceiling altitude. The method of maintaining altitude and speed in a fixed-wing aircraft in level flight using classical control method is generally using thrust for speed increase/deceleration and pitch attitude for altitude increase/decrease. If this method is used near the service ceiling altitude, increasing the pitch to reduce the altitude error results in a speed reduction. Therefore, it is necessary to use a control method that maintains the speed first using the pitch attitude. Especially in the case of unmanned aerial vehicles, these two methods should be automatically available at the right time. In this paper, we propose a method of switching the speed and altitude maintenance algorithm near service ceiling altitude.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.69-77
• /
• 2002

To acquire the dynamic response and design the controller of the airship, the longitudinal motion of the airship with respect to the vertical gust, which is the nonlinear system, was studied. The effects of the apparent mass and moment of the airship delay the dynamic response and the settling time, which are slower than those of conventional airplanes. The current object of the airship is designed to cruise at 500~1000m altitude. At that height, the atmospheric conditions are generally unstable by wind gust. In this paper, it has been studied for the case of vertical gust, since the apparent mass effects are dominant in has been studied for the case of vertical gust, since the apparent mass effects are dominant in that plane. In addition to the study of the dynamic responses of the airship, the controller was designed using the PID-controller. When the gust was applied, airship responses were recovered of equilibrium states. However, it takes too ling time for recovery and the speed of airship is reduced. So, the aim in this paper was to fasten the recovery speed and to get back the cruising velocity. The control parameters were determined from the stability mode analysis, and the control inputs were the thrust and the elevator deflection angle.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.649-652
• /
• 2012

회전익항공기의 연료셀 내부는 연료보관 및 연료를 엔진으로 공급하기 위한 배관과 구성품들이 배치되어 있다. 특히, 기동헬기는 전장에서 사용되는 헬기로써, 수 km 고도에서 비행하는 고정익기보다 비행고도가 낮기 때문에 피탄될 가능성이 높다. 따라서, 항공기의 생존성을 극대화하기 위해서는 피탄시 유체내부 상승압력에 의한 내부 LRU 가 받는 영향성을 검토하여 설계되어야 함은 주지의 사실이다. 그러나, 내탄시험은 연료셀 자체의 제작비용 및 준비기간이 상당히 소요되고, 실탄사용에 따른 시험수행의 제약 때문에 수치모사를 통한 관련 데이터의 확보가 필요하다. 이를 위해 본 연구에서는 유체-구조 수치모사 프로그램인 Autodyn을 이용하여 회전익항공기 연료셀의 내탄 수치모사를 수행하여, 피탄 후 연료셀 내부에서의 탄 거동을 분석하고 유체내부의 압력과 연료 셀 자체의 등가응력을 평가하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.264-273
• /
• 2010

In this work, autonomous formation flight tests of multiple UAVs are experimentally studied. After a guidance and control system for a UAV is designed and tested, PID formation controller for follower UAV is tested using longitudinal and lateral distance feedback. It is shown that more stable and efficient formation guidance system is obtained by using position and attitude of the leader aircraft, which is exploited to calculate virtual waypoint for follower. In order to improve transient response during turn, part of roll command of the leader is added to the guidance command. Finally, autonomous formation flight test results of 3 UAVs are shown by using the best guidance algorithm suggested.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.75-82
• /
• 2017

Recently, as the roles and utilization fields of UAV become more diverse, demand for high - level mission has been increasing. To solve this issue, researches on the operation of multiple small UAVs and related systems have been actively carried out. The multiple small UAVs based application system has a problem that the task complexity of control personnel increases because the control personnel must continuously control and manage several small UAVs. Hence, it is necessary to develop a software platform that can perform efficient control in order to employ a multiple small UAVs based application system successfully. In this paper, we propose an effective ground control software platform for application systems using multiple small UAVs. We first analyze the requirements for the software platform, and design and implement software based on the analysis. Simulation using the X-plane flight simulator shows that multiple flight data are effectively displayed and that the image data transmitted from many small UAVs are simultaneously displayed in real time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.527-534
• /
• 2018

The endurance of the multi-copter is one of the important variables that determine the mission performance. Therefore, accurate endurance should be defined as essential for performing effective missions. In this paper, we present the results of the study on the flight performance of the aircraft, especially the hovering of the drone(multi-copter). Unlike conventional aircraft, which consider aerodynamic performance by the fuselage, the multi-copter is mostly determined by the propulsion system. Therefore, the research method classifies the various parts constituting the drone system into functions, analyzes the performance of the unit parts and obtains the experimental data by sorting out the specifications and functions at the component level and mathematical formulation, The results of this study are as follows. In addition, the 5kg class quad copter was used to predict and verify the voltage change with endurance through analysis of in situ flight. By predicting endurance under various conditions, it can help design/build the right Multi-copter for mission.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.251-260
• /
• 2020

Unlike manned aerial vehicles, because an unmanned aerial vehicle (UAV) has a limitation which allows only remote test during flights, it is very important to maintain the high reliability of the vehicle through pre- and post-flight tests. To this end, this paper designed an air vehicle test equipment (AVTE) for UAV which meets the derived hardware and software requirements. Based on this design, the AVTE was implemented in accordance with the actual test scenario. The implemented AVTE has the advantage of reducing the time and cost required for the test of UAV by allowing the operator to perform automatic or manual tests for necessary parts in various situations such as before and after starting engine and pre- and post-flight tests. Furthermore, this study is expected to help with the design and implementation of AVTE for other UAVs.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.169-172
• /
• 2009

본 논문은 SOM을 이용하여 비행슈팅게임을 하는 게이머의 긴장과 이완상태를 학습한다. 학습된 SOM을 이용해 게이머의 새로운 심박데이터가 입력되었을 때 긴장과 이완 상태에서 플레이하는 게이머의 인식을 제안한다. 게이머들은 비행슈팅게임을 플레이하면서 게임 환경들의 패턴들에 익숙해진다. 게이머들은 반복하면서 지루해지면서 자연스럽게 긴장감도 떨어지게 된다. 만약 긴장이완 정도를 알 수 있다면 게이머의 상태에 맞게 게임환경을 조절하여 긴장감을 유지할 수 있을 것이다. 본 연구에서는 비행슈팅게임을 하는 게이머의 심박신호를 이용하여 게이머의 긴장이완상태를 신경망 SOM으로 분류한다. SOM은 주어진 입력패턴에 정확한 답을 정해주지 않고 자기 스스로 학습하여 해답을 찾는 신경망중의 하나이다. 따라서 게이머의 심박신호는 SOM 학습을 통해 게이머의 긴장과 이완상태들을 군집화 할 수 있다. 비행슈팅게임을 20회 반복 플레이하여 SOM으로 게이머의 심박신호를 입력해 본 결과 긴장이완상태를 인식 할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.588-593
• /
• 2011

In this study, the performance analysis method for ramjet engine system with atmospheric air disturbance was proposed. Flight path was determined to satisfy dynamic pressure constant at each flight altitude. The atmospheric air disturbance incoming into a engine intake was simulated by the model Tank proposed. The performance parameters was investigated at each flight condition with air disturbance. Engine operation stability was evaluated as analysis of the normal shock position.