• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.19-31
• /
• 2021

Recently, the development of UAV application system using augmented reality (AR) has received much attention. In general, the design and implementation of UAV application system are verified with SILS techniques before actual flight experiments. However, existing SILS environment cannot be used to verify the application system based on AR and UAV because it does not include key features related to AR. To overcome this problem, we proposed an SILS platform that could be effectively used for the development of application systems based on AR and UAV. Simulation results on accuracy, efficiency, and scalability show that the proposed platform could be effectively utilized for the development of AR and UAV based-application systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.187-192
• /
• 2021

This study proposes a system for take-off in a forest or similar complex environment using an object detector. In the simulator, a raspberry pi is mounted on a quadcopter with a length of 550mm between motors on a diagonal line, and the experiment is conducted based on edge computing. As for the images to be used for learning, about 150 images of 640⁎480 size were obtained by selecting three points inside Kunsan University, and then converting them to black and white, and pre-processing the binarization by placing a boundary value of 127. After that, we trained the SSD_Inception model. In the simulation, as a result of the experiment of taking off the drone through the model trained with the verification image as an input, a trajectory similar to the takeoff was drawn using the label.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1124-1129
• /
• 2021

The application area based on UAV (Unmanned Aerial Vehicle) is continuously increasing as time passing by. In particular the UAVs which consist of more than four horizontal propellers and the functionality of VTOL (Vertical Take-Off and Landing) are utilized in diverse platforms and the application products due to their safety and aerodynamically simpler design and architectures. The most UAV missions are controlled by GCSs (Ground Control System). The GCSs are generally connected to the internet and get electrical map and environmental information such as temperature, humidity, wind speed, wind direction and so on. In this paper, we design a system for UAV system to have capability of approaching to a certain ship and monitoring her efficiently by using AIS (Auto Identification System) information. Furthermore we verify that adapting AIS on GCS side is more efficient through experiments.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.47-53
• /
• 2022

With the recent development of defense technology, various aircraft armaments/equipments are being developed. Among them, cruise guided weapons(missile) for launching aircraft can be installed on aircraft aftersecuring reliability and safety through varioustests. In order to avoid collision with aircraft, missile separated from aircraft must release restraint of wing at the specified time, control wing in the specified direction. In order to confirm this, a test system that can control MIL-STD-1760 according to safety separation procedure and verify release performance is required. test system needs a function to check circuit for release of restraints and a function to check driving performance by controlling MIL-STD-1760. In addition, test system should be simulate environment separated from aircraft. This paper presented a testsystemthat can verify circuit and driving performance mounted on missile according to the safety separation procedure, and it was confirmed that it was normally separated from aircraft through flight tests.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.91-98
• /
• 2022

Unmanned aircraft system traffic management (UTM) service for the safe operation of unmanned aerial vehicles (UAV) such as drones using commercial communication networks such as long-term evolution (LTE) and 5G in low-altitude areas of 150m or less is being studied in several countries. In this paper, whether it is possible to secure three-dimensional (3D) coverage for UTM service using the existing LTE cellular network for terrestrial usersis analyzed through simulations. The practicality in the real environment is confirmed by performing performance analysis in the actual topographical environment and the LTE base station layouts in Korea. According to the analysis results, as the altitude increases, the number of line-of-sight (LOS) interference base stations increases, resulting in a worse signal to interference plus noise ratio (SINR), but coverage is secured except for the limited areas within 150m. was confirmed to be possible. In addition, it is confirmed that a significant proportion of outage areas could be reduced by placing a small number of additional base stations for the outage area.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.162-166
• /
• 2023

This study is a pilot operation roadmap for the introduction of the co-pilot qualification (MPL) system, and the introduction of the MPL system in Korea is a new pilot education and qualification system based on competency. Therefore, it may be difficult to prepare for various matters such as securing initial regulations, securing training businesses or trainees, and establishing training infrastructure, so the roadmap necessary for pilot operation is very important for the successful introduction of the MPL system. In order to secure a training program and qualification system with proven MPL systems in the domestic aviation market, the government and aviation industry members will jointly participate to highlight the importance of a pilot operation roadmap for the domestic flight environment.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.40-48
• /
• 2022

Recent studies have reported about UAV-based disaster rescue system adopting AR technology. Performing a disaster rescue training in an environment similar to an actual disaster site results in high costs and risk of accidents. In this paper, we propose a simulation software using VR technology so that rescuer can safely and inexpensively train the operation of the disaster rescue system. Through the analysis of the existing system, we derived the requirements for virtualizing training, and developed the simulation software using Unreal Engine and Airsim API. Simulation results show that the proposed simulation software can effectively simulate the operation of the conventional disaster rescue system.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.257-262
• /
• 2023

Recently there are increasing number of claims that it is necessary to build a countermeasure in case of aggressive threats by small drones. During Russia-Ukraine war ignited by Russian invasion on February 2022, attacking drones have been being used widely to damage other country's national major facilities. On December 2022, 5 drones sent by North Korea made a flight around Seoul, South Korea about 7 hours, but it was not successful to search and track them. Furthermore, none of these were destroyed and shot down. Counter-drone system is essential system to search and identify unintended small drones and disable them. This paper is for proposing required functions for building a counter-drone system for national major facilities. We conducted focus group interviews with relevant government officials and analyzed their suggestions on how to augment protection capabilities to defend against small drone attacks.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.26-37
• /
• 2023

Urban air mobility (UAM) is being developed as part of the next-generation aircraft, which could be a viable solution to entrenched problems of urban traffic congestion and environmental pollution. A new airport platform called vertiport as a space where UAM can take off and land vertically is also being introduced. Noise regulations for UAM will be strict due to its operation in a highly populated urban area. Ground effects caused by vertiport can directly affect aerodynamic forces and noise characteristics of UAM. In this study, ground effects of vertiport on aerodynamic loads, vorticity field, and far-field noise were analyzed using Lattice-Boltzmann Method (LBM) simulation and Ffowcs Williams and Hawkings (FW-H) acoustic analogy with a permeable surface method.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.393-403
• /
• 2022

Various studies suggest that the initial operating form of UAM, which is being presented as a solution to the urban traffic problem, will be similar to VTOL aircraft among current aircraft. In a form similar to determining the direction of the runway where fixed-wing aircraft take off and land, the vertiport where take-off and landing of VTOL aircraft takes place determines the flight direction of departure and arrival in consideration of the direction of the wind. Unlike areas where airports are generally built, in the case of downtown areas, it is expected that the characteristics of wind may continuously change depending on the environment of changing terrain or obstacles such as the construction of new buildings. In this study, long-term actual observation data for reviewing the take-off and landing directions at the city center where the location of the vertiport is expected are compared using a wind speed map, and the characteristics of the ground wind and the possibility of change in the direction of the predominant wind depending on the observation period and observation location confirmed.