• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.4 no.1
• /
• pp.25-38
• /
• 1996

본 연구에서는 항공기 사고의 70%이상을 차지하는 이 ${\cdot}$ 착륙단계 중에서, 이륙 직후 저고도에서 동력이 상실되었을 경우에 이륙활주로 방향으로 Turning Back하는 것은 어떠한 안전 한계를 지니고 있는지를 알아보기 위하여, 우선 조종사에 대한 설문 조사를 실시하여 비행 경력별로 이륙 직후 동력 상실시의 비상 처치 경향과 위험에 처할 확률을 조사하였다. 그리고 실제 활공 성능이 우수한 M20J 항공기와 기동 성능이 우수한 FH20 항공기를 이용한 비행 시험을 통하여 이륙 직후 Turning Back to Runway조작 시의 고도 손실과 선회시 하강율을 실험 자료로 구하였다. 비행 시험 자료를 비교 적용함은 물론 선회 소요 시간과 고도 손실, 선회율과 활공 속도와의 관계 등의 항공 역학적 이론을 적용한 분석 근거에 기초하여 안전하게 Turning Back to Runway 조작을 시작할 수 있는 안전 고도 한계 및 선회율을 제시하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.981-988
• /
• 2021

This paper presents a decentralized guidance algorithm for swarm flight of fixed-wing UAVs (Unmanned Aerial Vehicles). Considering swarm flight missions, we assume four representative swarm tasks: gathering, loitering, waypoint/path following, and individual task. Those tasks require several distinct maneuvers such as path following, flocking, and collision avoidance. In order to deal with the required maneuvers, this paper proposes an integrated guidance algorithm based on vector field, augmented Cucker-Smale model, and potential field methods. Integrated guidance command is synthesized with heuristic weights designed for each guidance method. The proposed algorithm is verified through flight tests using up to 19 small fixed-wing UAVs.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.35-35
• /
• 1999

최근 미사일 및 차세대 비행체에는 초기 고기동이나 무수한 제어력의 특성을 지닌 TVC 시스템이 많이 사용되고 있다. 기존의 공력 조타에 의한 비행 자세 제어방법은 속도의 2승에 비례하는 제어력을 발생하지만, TVC(Thrust Vector Control)를 이용하면 추력 방향을 변경하여 제어력을 얻음으로써 방향 제어에 보다 월등한 성능을 발휘할 수 있기 때문이다. TVC를 이용한 방향제어는 저속도 경우와 공기가 희박한 고 고도에서도 충분한 제어력을 얻을 수 있다. 그러나 그 우수성에 비추어 국내에서는 아직 그 성능에 대해 충분한 자료가 없는 실정이다.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.66-75
• /
• 2003

A high intensity acoustic test facility has been constructed at Korea Aerospace Research Institute (KARI). Spacecrafts are tested in the facility to check the reliability on acoustic environment of launch vehicles. The reverberant chamber of the facility has a volume of 1,228 cubic meters and provides an acoustic environment of 152 dB over the frequency range of 25 Hz to 10,000 Hz. This paper describes how the basic parameters of the facility including a chamber and power generation system are designed. Moreover, design parameters including acoustic spectrum, acoustic modulator characteristics, reverberation time and isolation characteristics are experimentally verified during acceptance tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1222-1228
• /
• 2008

A small satellite, DubaiSat-1 FM(Flight Model), which is based on SI-200 standard bus platform and scheduled to be launched in 2008, is being developed by Satrec Initiative and EIAST(Emirates Institution for Advanced Science and Technology). The TCS(Thermal Control Subsystem) of DubaiSat-1 FM has been designed to mainly utilize passive thermal control in order to minimize power consumption, but the active control method using heaters has been applied to some critical parts. Also, thermal analysis has been performed for DubaiSat-1's mission orbit using a thermal analysis model. The thermal design is modified and optimized to satisfy the design temperature requirements for all parts according to the analysis result. The thermal control performance of DubaiSat-1 FM is verified by thermal vacuum space simulation, consisting of thermal cycling and thermal balance test. Also, to validate the thermal modeling of DubaiSat-1 FM, comparison of test results with analysis has been performed and model calibration has been completed.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.26-34
• /
• 2018

Structural static test and the performance test were conducted to determine whether the propeller developed for a multi-copter with the take-off weight of 25 kg satisfies the design requirement. The result of the structural test revealed that the propeller had a safety margin of 3 or more as the ultimate load and requirement load did not cause the specimen breakage. In the performance test, the propeller generated the hover thrust and maximum thrust of design requirement, and hover efficiency in the operating thrust range was greater than 0.73. Maximum hover efficiency increased by more than 3% compared to the reference propeller and electric power consumption decreased by more than 4% in the operating range. The propeller was found to be successfully developed based on the satisfaction rate of the structural strength requirement and the performance requirement.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.281-288
• /
• 2019

A Flight test is an important process that must be performed to maintain airworthiness in the aircraft lifecycle, including aircraft development and certification. Flight test can be conducted for the purpose of demonstrating or verifying compliance with the applicable standard. Results of the flight test air accident analysis confirm that it is caused by a combination of various factors as well as aircraft. The International Civil Aviation Organization recommends the establishment and implementation of a safety management system to prevent aircraft accidents, but it does not reflect the specificity of the flight test. As such, advanced countries are providing separate criteria to assist stakeholder in conducting flight test safety management. This study investigates and analyzes relevant regulations of advanced countries, in accordance with the construction of a national flight performance test site in Korea, and proposes government-level guidelines to help stakeholders develop their flight test operation manuals. The guidelines discuss topics such as organizational composition, safety and risk management, flight operation, personnel management, and administrative issues.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.560-562
• /
• 2017

This paper presents the development and test results of a test rig for confirming the hover performance of the coaxial propeller which is applied to the drone in order to carry out the mission that requires high payload such as the development of the courier drones. the performance of each propeller was measured by varying the thrust and torque according to the H/D ratio. the Thrust sensor and torque sensor were used to measure the thrust and torque generated when the propeller rotated, and a photo sensor was used to measure the rpm. it used the data acquisition system to acquire data from each sensor, and used the Labview softwaer to control data storage, monitoring and BLDC motor control. In the test, each propeller meansured the figure of mefit according to the chansge of the interval at the same rpm.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.188-196
• /
• 2007

A composite case was designed to satisfy the required condition of KSLV-I kick motor system. we performed the structure and combustion tests to insure the reliability of the case before the production of the flight model. The hydraulic, vacuum and non destruction testes as the structure test were carried out to confirm the strength of the components of the case and the characteristics of the thermal and structure were investigated through the ground combustion test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.5-5
• /
• 1999

3단형 과학로켓(KSR-III)의 기본형 및 응용형에 공통으로 사용되는 주엔진은 액체산소를 산화제로, 케로신을 연료로 사용하는 액체추진기관이다. 엔진 기본설계를 통하여 로켓 임무 요구사항에 부합되도록 엔진 각 부분의 기본제원을 설정하였고, 엔진의 형상을 결정하였다. 설계된 엔진의 성능검증 작업은 분사시험용 엔진, 축소형 엔진, 엔지니어링 모델 및 비행시험모델의 설계/제작/시험을 통하여 순차적으로 수행할 계획이다. 본 연구는 3단형 과학로켓 엔진의 기본설계 및 성능검증 계획에 관한 것이다.