• Conservation Science in Museum
• /
• v.4
• /
• pp.57-61
• /
• 2003

From the stupa of Sujongsa-Temple, located in Yangpyeong, Gyeonggi-do province, was excavated a celadon jar with lid, a gilt-bronze nine-storied miniature pagoda and a silver-plate hexagonal miniature shrine, etc. Among them, the gilt-bronze miniature pagoda has been known as a gilt-bronze product since most of its surface has copper tint and the base part has bronze corrosion. Its formal title registered on the Cultural Properties Administration also begins with "a gilt-bronze". However, it was supposed to be a gold product in many aspects: the color and status of the surface, degree of the bronze corrosion creation and the metal thread joining the wind bell. So the necessity to prove its material by a scientific analysis was raised. We examined it with nondestructive method. The results were traces of open-working on many parts of the surface, but no traces of gilding. Moreover, as we perform an XRF analysis, the main component were gold and silver(16%) and some impurities such as copper and iron were found. Therefore, it could be inferred that this miniature pagoda is a gold product.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.429-437
• /
• 2006

Existing basic mechanical models which are methods characterizing viscoelastic materials were first reviewed to account for viscoelastic behavior of the asphalt pavement structure in this paper. A viscoelastic mechanical model considering a single load of vehicles subsequently was suggested and an equation that indicates the time-dependant behavior of asphalt pavements was derived from the proposed model. Non-destructive tests using falling weight deflectometer(FWD) were performed for a test section to estimate the application of the model. Both deflections and strains procured by the equation were compared to testing results according to loading history. By observing field measurements and theoretical evaluations, if two results are compared by the features of deflection according to time history, it could be concluded that the proposed model is expected to be suitable for prediction of the behavior of asphalt pavements because there is hardly difference between field data and calculated data.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.373-379
• /
• 2022

The radiation source used for non-destructive testing have permeability and cause a scattered radiation through collisions of surrounding materials, which causes changes in the surrounding spatial dose. Therefore, this study attempted to evaluate and analyze the distribution of spatial dose by source in the working environment during the non-destructive test using monte carlo simulation. In this study, Using FLUKA, a simulation code, simulates ⁶⁰Co, ¹⁹²Ir, and ⁷⁵Se source used in non-destructive testing, The reliability of the source term was secured by comparing the calculated dose rate with the data of the Health and Physics Association. After that, a non-destructive test in the radiation safety facility(RT-room) was designed to evaluate the spatial dose according to the distance from the source. As a result of the spatial dose evaluation, ⁷⁵Se source showed the lowest dose distribution in the frontal position and ⁶⁰Co source showed a dose rate of about 15 times higher than that of ⁷⁵Se and about 2 times higher than that of ¹⁹²Ir. In addition, the spatial dose according to the distance tends to decrease according to the distance inverse square law as the distance from the source increases. Exceptionally, ⁶⁰Co, ¹⁹²Ir, and ⁷⁵Se sources confirmed a slight increase within 2 m of position. Based on the results of this study, it is believed that it will be used as supplementary data for safety management of workers in radiation safety facilities during non-destructive testing using radioactive isotopes.

• Journal of Biosystems Engineering
• /
• v.24 no.6
• /
• pp.539-546
• /
• 1999

Some stress for a plant could be detected to a certain degree by plant physiological measuring technique of the state of the art. The capability of early detection of my measuring system depends on kind of plant and kind and level of stress. The objectives of this study were to evaluate the capability of several fast and intact type plant stress detection systems to detect nitrogen deficiency of cucumber in the field. A series of experiment was carried out with four kinds of intact type measuring devices - a chlorophyll content meter, a chlorophyll fluorescence measurement system, an infrared thermometer and an optical spectrometer. The experiments resulted that the chlorophyll content meter could detect the stress of N deficiency at a confidence level higher than 95% on 3rd day for the earliest case and the detection of high precision was possible from 7th day after the stress was applied. The chlorophyll fluorescence measurement system detected the stress at a confidence level higher than 95% on 3rd day for the earliest case but the detection was not as much precise as the chlorophyll content meter. Leaf temperature measurement noted very poor results to detect the stress. Using the spectrometer, sensitive wavelength regions to detect the stress were searched and found out as 562∼564 nm, 700∼724 nm and 1,886∼1,894 nm. With the spectrometer using any of wavelength within the sensitive wavelength region, detection of the stress at a confidence level higher than 95% was possible from 3rd or 4th day after the stress was applied.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.259-260
• /
• 2003

대기환경에 대한 정보의 파악은 환경연구의 기본이 된다. 유해원소 및 미량원소에 의한 환경오염과 그로 인한 인체건강에 대한 영향은 인간생활에 심각한 문제가 되므로 대기, 수질, 토양등의 환경시료 중의 농도를 정확히 측정하는 것은 매우 중요한 일이다. 중성자방사화분석법은 핵반응을 통해 생성시킨 방사성동위원소로부터 방출되는 방사선을 검색하여 절대적으로 성분원소를 정량하는 핵분석기술(Nuclear Analytical Techniques)중의 하나로서 소량의 시료로부터 미소량원소의 비파괴, 동시다원소분석이 가능하고 분석감도($10^{-3}$ - $10^{-7}$$\mu\textrm{g}$)가 탁월한 분석기술이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.219-220
• /
• 2002

대기환경에 대한 정보의 파악은 환경연구의 기본이 된다. 유해원소 및 미량원소에 의한 환경오염과 그로 인한 인체건강에 대한 영향은 인간생활에 심각한 문제가 되므로 대기, 수질, 토양 등의 환경시료 중의 농도를 정확히 측정하는 것은 매우 중요한 일이다. 중성자방사화분석법은 핵반응을 통해 생성시킨 방사성동위원소로부터 방출되는 방사선을 검색하여 절대적으로 성분원소를 정량하는 핵분석기술(Nuclear Analytical Techniques)중의 하나로서 소량의 시료로부터 미소량원소의 비파괴, 동시다원소분석이 가능하고 분석감도($10^{-3}$-$10^{-7}$$\mu\textrm{m}$)가 탁월한 분석기술이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.328-329
• /
• 2002

대기환경에 대한 정보의 파악은 환경연구의 기본이 된다. 유해원소 및 미량원소에 의한 환경오염과 그로 인한 인체건강에 대한 영향은 인간생활에 심각한 문제가 되므로 대기, 수질, 토양 등의 환경시료 중의 농도를 정확히 측정하는 것은 매우 중요한 일이다. 중성자방사화분석법은 핵반응을 통해 생성시킨 방사성동위원소로부터 방출되는 방사선론 검색하여 절대적으로 성분원소를 정량하는 핵분석기술(Nuclear Analytical Techniques)중의 하나로서 소량의 시료로부터 미소량원소의 비파괴, 동시다원소분석이 가능하고 분석감도가 탁월한 분석기술이다. (중략)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.418-428
• /
• 2003

Fiber fracture is one of the dominant failure phenomena affecting the total mechanical Performance of the composites. Fiber fracture locations were measured through the conventional optical microscope and the nondestructive acoustic emission (AE) technique and then were compared together as a function of the epoxy matrix modulus and the fiber surface treatment by the electrodeposition method (ED). Interfacial shear strength (IFSS) was measured using tensile fragmentation test in combination of AE method. ED treatment of the fiber surface enlarged the number of fiber fracture locations in comparison to the untreated case. The number of fiber fracture events measured by the AE method was less than optically obtained one. However, fiber fracture locations determined by AE detection corresponded with those by optical observation with small errors. The source location of fiber breaks by AE analysis could be a nondestructive, valuable method to measure interfacial shear strength (IFSS) of matrix in non-, semi- and/or transparent polymer composites.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.183-188
• /
• 2017

In recent years, the automatic remote control controller of the gamma ray irradiator malfunctions, and radiation workers are continuously exposed to radiation exposure accidents. In the non-destructive testing field, much time and resources are invested in establishing a radioactive source monitoring system in order to prevent potential incidents of radiation. In this study, the gamma-ray response properties of the lead monoxide-based radiation detector were estimated through monte carlo simulation as a previous study for the development of a radioactive source location monitoring system that can be applied universally to various non-destructive testing equipment. As a result of the study, the optimized thickness of the radiation detector varies according to the gamma-ray energy emitted from the radioactive source, and the optimized thickness gradually increases with increasing energy. In conclusion, the optimized thickness of the lead monoxide-based radiation detector was $200{\mu}m$ for the Ir-192, $150{\mu}m$ for the Se-75 and $300{\mu}m$ for the Co-60. Based on these results, the appropriate thickness of lead monoxide-based radiation detector considering secondary-electron equilibrium was evaluated to be $300{\mu}m$ for general application. These results can be used as a basic data for determining the appropriate thickness required in the radiation detector when developing a radiation source location monitoring system for universal application to various non-destructive testing equipment in the future.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.5
• /
• pp.1-9
• /
• 2009

In this study, the properties of shear wave velocity of coarse gravel in filldams are analyzed. Shear wave velocity is derived using the surface wave analysis method, which can be used nondestructively on the surface of filldams. These values are acquired through the tests for the rock zone of six filldams by SASW and HWAW methods. These analytical results are compared with results obtained through the frequently-used empirical method of Sawada and Takahashi.