• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.253-255
• /
• 2007

비파괴검사방식 중 자기누설 탐상법(Magnetic Flux Leakage, MFL)은 선박의 표면이나 인간의 손이 닿지 않는 곳의 부식상태를 파악하기에 적합한 방법이다. 실시간 모니터링 가능한 자기누설 탐상 시스템은 빠르고 정확한 검사가 요구되는 대형 선박의 교면 검사에서 유용하게 사용될 것으로 예상된다. 본 논문에서는 스파이더형의 소형 비파괴 검사기를 실시간 모니터링이 가능하도록 제작하였다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.425-432
• /
• 2003

The joint treatment of concrete is one of the technical problems in concrete constructions. Joints created with concrete constructions result in serious weakness in the aspects of both structural and water-barrier function. The radar and the infrared thermography method have been used for the non-destructive inspection of several construction joints of concrete structures in this study. The advantages and limitations of these methods are investigated for non-destructive inspection on construction joints of concrete columns. It can be shown that the detecting precision of construction joints using these methods is improved if radar analysis is carried out with a simulation analysis. In case of the infrared thermography method, the shape of construction joints can be also detected when heating is performed before testing. As the result, it has been verified that the construction joints, difficult to be detected by visual inspection, could be inspected effectively in broad areas at short period of time when these two methods are applied.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.294-299
• /
• 1999

In this paper, the calibration system for contact transducer has been developed to improve the reliability of the inspection result of ultrasonic testing on rotors. This system consists of signal processing parts: (oscilloscope, spectrum analyzer, pulser/receiver), standard block, and user interface program. Signal processing for the calibration system was performed quickly with high accuracy. The developed system has been applied to a practical calibration of probe using the non-destructive testing on rotors, and demonstrated high sensitivity and precision.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.3 no.1
• /
• pp.12-18
• /
• 1983

This paper describes the procedures and results of an acoustic emission testing performed during hydrotest of spherical pressure vessel for propane storage. A computer based multi-channel real time monitoring and source location analysis AET-4900 system was used for AE testing. The vessel was extremely quiet throughout the entire test run and especially 6 to $14.5kg/cm^{2}$, it is normal operating pressure range. After exceeding $14.5kg/cm^{2}$, one of the 20 sections showed the most event in any one section 11 total but there were scattered at different locations. In order to confirm the events seen in horizontal weld line of that section, proof testing was performed with ultrasonics and radiography.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.2
• /
• pp.67-72
• /
• 1989

In nuclear power plants, nondestructive examinations(NDE) plays an important role in ensuring the integrity and reliability operation. As the number of plants and operational time increased, manual handling of voluminous data associated with PSI/ISI(preservice/inservice inspection) could result in many errors or mistakes in writing the examination plan or other reports. Several new approaches to process the data have been attempted and DBMS(Data Base Management System) has been well known concept with a faster and more accurate data processing. This paper proposes an application program, called NDTSYS designed with DBMS in micro computer. The program could be used for a tool to add new records to a data base, change existing records, delete records and request reports with the data base. It would be helpful to the user who manage the PSI/ISI data with minimal time and effort.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.4
• /
• pp.219-227
• /
• 1995

A two-dimensional photoacoustic microscope utilizing photoacoustic signals generated by periodic heating of specimen surface with Argon ion laser and measured by accelerometer has been developed. Several aluminum specimens with various defects have been examined, characteristics of the microscope have been evaluated and optimal experimental conditions have been determined by examining the dependence on several experimental conditions including the modulation frequency and the beam width of laser.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.448-453
• /
• 1999

원전의 열성층 현상으로 발생하는 열 피로균열 및 입계응력부식균열(IGSCC) 등은 결함에 대해서 검사자의 특별한 관심과 노력 없이는 초음파를 이용해 이러한 종류의 결함검출 및 크기 측정이 쉽지 않다. 이러한 결함의 검출 및 크기 측정을 위해서 먼저 초음파 모드 변환 기법을 사용하여 결함 검출 및 결함 크기를 분류한 후에 결함 끝단에서의 초음파 회절파(tip diffraction)를 이용한 여러 가지의 초음파 기법 둥으로 정확한 결함 크기를 측정하여 가동전 중점검시 발견된 결함의 추적 관리 및 결함평가신뢰도 향상에 기여하고자 한다. 따라서, 여기서는 열 피로균열 및 입계응력부식균열 등과 같은 결함의 정확한 검출 및 크기 측정을 위해 초음파 모드 변환 기법의 특성을 철저히 이해하고 이에 관련된 초음파 신호들을 정확히 구분할 수 있는 방법을 기술하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.1
• /
• pp.5-10
• /
• 1984

One of the cylindrical reactor vessels in petrochemical plants was examined by acoustic emission method. The vessel was quiet in view of A.E. activity throughout the pressure range $12-44kg.f/cm^{2}.G$. Above the pressure of $44kg.f/cm^2$, some events were appeared lower than 30 counts. In order to verify the events, other Nondestructive testing methods were performed and a surface crack, 10mm in length and 0.8mm in depth, was found on the outside surface of circumferential weld.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.2
• /
• pp.14-20
• /
• 1992

Stress analysis has been performed using computer program ANSYS in the pressurizer surge line in accordance with ASME Sec. III in order to predict possibility of fatigue failure due to thermal stratification phenomena in pipes connected to reactor coolant system of nuclear power plants. Highly vulnerable area to crack generation has been chosen by the analysis of fatigue due to thermal stress in pressurizer surge line. This kind of result can be helpful to choose the location requiring intensive care during inservice inspection of nuclear power plants.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.147-151
• /
• 2001

An optical fiber sensor is capable of nondestructive measurement of a structure and it has an advantage of the immunity to electromagnetic interference because light is not affected by electromagnetic wave. In addition, if optical fibers are buried in an object like a concrete, this sensor tan analyze defects and physical status of the object without disassembling it. Especially, the fiber Bragg grating sensor is a promising optical fiber sensor capable of nondestructive test of such an object. A fiber Bragg grating has the characteristics of reflecting or blotting light of a specific wavelength. If we apply physical quantity like strain to the fiber Bragg grating, the center wavelength of the reflected light is shifted and then we can find the physical quantity applied to the fiber Bragg grating by measuring the center wavelength shift of the reflected light. The fiber Bragg grating sensor capable ot static and dynamic strain measurement is being used in health-monitoring of buildings, structures, etc. Recently increasing is interest in dynamic strain measurement inevitable to the civil structures such as roads and bridges. In this study we implemented the optical fiber sensor system which can measure dynamic strain at multiple points using Fabry-Perot wavelength demodulation. And we measured the static and dynamic strain using this sensor system with a test structure(cantilever). Measurement results were similar to those obtained with the conventional electrical measurement methods.