• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.635-644
• /
• 2003

To ensure the reliability of ultrasonic nondestructive testing techniques for modern structural materials, the effects of anisotropy and inhomogeneity and the influence of non-planar component geometries on ultrasonic wave propagation have to be taken into account. In this article, fundamentals and applications of two analytical approaches to three-dimensional elastic beam field calculation are presented. Results for both isotropic materials including curved interfaces and for anisotropic media like composites are presented, covering field profiles for various types of transducers and the modeling of time-dependent rf-signals.

• 비파괴검사학회지
• /
• 제11권1호
• /
• pp.23-30
• /
• 1991

In this study the bonding quality evaluation of FRP honeycomb structure was performed by the ultrasonic C-Scan method and stress wave factor measurements. These NDT techniques could be well applied to the disbonding detection of FRP honeycomb structures. Especially, stress wave factor (SWF) measurement is expected to be a useful technique in field applications.

• 비파괴검사학회지
• /
• 제12권4호
• /
• pp.18-25
• /
• 1993

This paper is to aim the microdefect evaluation of If package into a quantitative from NDI's image processing of ultrasonic wave. (1) Automatically repeated discrimination analysis method can be devided in the category of all kind of defects on IC package, and also can be possible to have a sampling of partial delamination. (2) It is possible that the information of edge section in silicon chip surrounding can be extractor by the partial image processing of IC package. Also, the crack detection is possible between the resin part and lead frame.

• 비파괴검사학회지
• /
• 제11권2호
• /
• pp.7-14
• /
• 1991

The integral model for the eddy current phenomena has been suggested. The model could lift the limitations of the previously well-known analytical model of eddy current theory. The model could be applied to two-dimentional, arbitary shaped defects. The computer programs have been developed in order to calculate the eddy current signal with the suggested integral method. The eddy current signals by the model calculations have been shown similar patterns to the actual experimental data from the real defects in the calibration standard tubes.

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.125-135
• /
• 2004

This paper describes the calculation technique for guided wave propagation with a semi-analytical finite element method (SAFEM) and shows some results of numerical calculation and guided wave simulation for plates, pipes and railway rails. The SAFEM calculation gives dispersion curves and wave structures for bar-like structures. Dispersion curve software for a pipe is introduced, and also dispersion corves for a rail are given and experimentally verified. The mode conversions in a plate with a defect and in a pipe with an elbow or a defect are shown as examples of our guided wave simulations.

• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.214-219
• /
• 2012

초음파전파영상화(UPI) 시스템은 2007년에 첫 논문 발표를 통해 시스템 개발이 보고된 이후 소프트웨어 및 하드웨어적 측면에서 다양한 형태로 발전된 시스템의 개발이 이루어졌다. 본 기고에서는 기본 UPI 시스템, 섬유파트랜스듀서 UPI 시스템, 순수광학시스템으로서 광섬유 센서 UPI 시스템, 완전비접촉 시스템으로서의 공기정압압전센서 UPI 시스템 및 레이저도플러진동계 UPI 시스템, 장거리 UPI 시스템, 옥외 적용성에 필수적인 저온환경 UPI 시스템 등을 소개한다.

• 비파괴검사학회지
• /
• 제1권1호
• /
• pp.6-12
• /
• 1981

소위 Satellite-Pulse Technique(SPT)을 이용하여 인공결함의 크기를 측정하였다. 측정치와 실제치를 비교하였는바 오차는 무시할 정도이었다.

• 비파괴검사학회지
• /
• 제7권1호
• /
• pp.18-31
• /
• 1987

For the purpose of domestic production of ultrasonic transducer, experiments on material selection for backing and matching layer, and electrical impedance matching between transducer and equipment were performed. The characteristics of manufactured transducers with experimental results were analyzed and compared with foreign products. Through the evaluation of the transducers manufactured and the comparision with foreign products, it is confirmed that the transducers manufactured show the good performance characteristics and efficiency.

• 비파괴검사학회지
• /
• 제7권1호
• /
• pp.7-17
• /
• 1987

Leak detection testing for the pipeline system was performed by the acoustic emission method. It was found that the detected signal spectrum was influenced by the frequency response of sensors and pressure changes. AE parameters and frequency spectrum distributions were used to analyze the leak signals. The slope rise time of AE parameters were the important factors for distinguishing leak signals. The amplitude of leak signal was more affected by the changes of leak, rate and pressure than those of leak type.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.1-12
• /
• 1990

본 고에서는 알루미늄 점용접시의 용접품질 및 용접봉 수명에 미치는 요소와 점용접부 설계방법에 대하여 간략히 설명하였다. 점 용접방법은 알루미늄 뿐만 아니라 steel의 박판용접에도 많이 사용되고 있으며, 특히 최근 공정자동화에 맞추어 가장 쉽게 자동화할 수 있는 용접 방법 중의 하나이다. 그러나 아직까지는 용접품질을 보증할 수 있는 비파괴 검사방법이 없기 때문에 새로운 비파괴 검사방법 개발 혹은 컴퓨터를 이용한 용접품질 추적방법에 대한 많은 연구가 요청된다. 한편 용접부 설계 관점에서는 조그만 단순 시편이 아닌 설계구조물을 이용한 용접강도 해석방법에 대한 연구가 미약하므로 이에 대한 많은 연구도 요청되고 있다.