• Tunnel and Underground Space
• /
• v.14 no.5
• /
• pp.363-372
• /
• 2004

Double torsion (DT) tests were carried out to investigate the influence of the geometry of guide groove on stress corrosion index of Kumamoto andesite. The fracture toughness was measured in the constant displacement rate, which was set to 2.07 MN/m$^{3}$2/ in average regardless of crack velocity. Stress corrosion indices, n were evaluated using specimens with rectangular, circular and triangular grooves and were 37, 36 and 38 in average, respectively. The n values were constant regardless of the groove geometry, however the DT specimen with triangular groove geometry showed the largest standard deviation in the relationship between crack velocity and stress intensity factor. The DT test was found to be effective in using a rectangular-grooved specimen and the width of the groove must be greater than the average grain size of minerals.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.545-555
• /
• 2002

This paper presents a matrix analysis to get the torsional behavior of core structures with torsional reinforcements. Based on simplified assumptions, formulae for the forces and displacements of cote structures subjected to three typical load cases, i.e. uniformly distributed torque, triangularly distributed torque and a concentrated torque at the top of the structure, are derived analytically. The behavior of the cote according to the variation of reinforcement locations is investigated to estimate the optimum locations of reinforcements to minimize the core rotations and bimoments. The results by the program MIDAS-GEN have shown that this analysis can give quite satisfactory results for structural models with torsional reinforcements. Although three dimensional analysis by computer has come within reach as a normal structural design procedure, its use as an optimization tool may not be desirable in view of the expense and time required. Formulae that we presented here can be used to estimate the torsional rotations and forces of practical cote structures at the preliminary design stages.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.279-284
• /
• 2016

Finite element analysis along with DOE scheme has been performed to obtain robust design of crankshaft assembly. This study focused on obtaining optimized fillet radius of crankshaft mainly by statistical approach. 27 design cases using 3 factors with 3 levels are constructed by design of experiment. Changes of design factors and noise factor may influence the durability of crankshaft system. General two stages of robust design may enhance the durability of crankshaft model. Increasing crank arm thickness was adopted as a shrink step and change of fillet radius was used as a shift step. By combining these two steps, the stress concentration at the fillet area is reduced and adequate fillet radius is determined for the robust design of crankshaft.

• Journal of Power System Engineering
• /
• v.9 no.1
• /
• pp.50-56
• /
• 2005

The corrosion experiment was performed for 120 hours on the specimens in the natural seawater tank with four steps of the loaded torsional stress. The surface corrosion pattern of SCM440 area was showed global corrosion and narrow pitting, that was cause by galvanic corrosion between friction welded IN713LC and SCM440. But corrosion does not proceeded from IN713LC area. Initially, the average relative electrode potential and corrosion current were decreased suddenly, by and large, it was stabilized gradually tend to decreasing with the elapse of the immersion time. The corrosion rate was decreased by increasing the load stress, but 200 MPa specimen was showed most large value.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.749-756
• /
• 2004

While designing shafting in reciprocating machines with internal combustion engines which derive generators, pumps, and vehicles, it is very important to calculate the additional stress of shafting by torsional vibration. In this paper, the transfer stiffness coefficient method which is based on the successive transfer of stiffness coefficient was applied to the calculation of the additional stress of shafting in reciprocating machine by torsional vibration. In order to confirm the effectiveness of the present method, a propulsion shafting with a diesel engine in a vessel was considered as the computational example of shafting in reciprocating machine. The results calculated by the present method were compared with those of the modal analysis method, the mechanical impedance method, and free vibration analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.741-749
• /
• 1994

The purpose of the present study is to propose a realistic method to analyze the prestressed concrete members subjected to long term torsional loading. The present study devises a method to realistically take into account the tensile stiffness of concrete after cracking. The effects of biaxial compressive and tensile loadings on the compressive and tensile strengths of concrete are also taken into account in the present model. The salient feature of the present study lies in the fact that the cracking, creep, and shrinkage behavior of concrete and the relaxation of steel have been realistically considered. The comparison of the present theory with experimental data indicates that the proposed model dipicts reasonably well the actual behavior of prestressed concrete members under long-term torsional loadings.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.61-72
• /
• 2004

This study investigated the inelastic lateral-torsional buckling of simply supported beams under a central concentrated load and a uniformly distributed load. A line-type finite element, method was incorporated with the "so-called" simplified and polynomial patterns of residual stresses. The effect of the load height was also considered in this study. The polynomial residual stresses assumed in this study was a quartic distribution in the flange and a parabolic distribution in the web. The inelastic lateral-torsional buckling of beam was analyzed with four different I-sections manufactured in Korea. Results obtained in this study were compared with KSDM(design method in the 1995 Korean Steel Designers' Manual). The design method in KSDM was found to be generally conservative with and without a sub-beam attached to the main beam, which acted as an intermediate restraint.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.1
• /
• pp.101-110
• /
• 1994

본 연구에서는 임의형상의 속의 찬 또는 중공 단면에 대한 비틀림 상수 및 전단응력 계산용 범용 프로그램 TORSION을 소개한다. Membrane Analogy로부터 차분법을 유도한 뒤 Successive Over Relaxation 방법을 사용하여 정해를 효과적으로 얻을 수 있었다. 사각단면 이외 단면의 경우, 경계조건을 전체 Boundary Mesh에 대하겨 계산 입력해야하는 번거러움을 해격하기 위하여 자동경계 생성기법을 사용하였다. 개발된 프로그램 TORSION을 사용한 Parametric 해석을 통하여 비교적 정확한 일반 중공단면용 비틀림상수 계산을 위한 개략식을 제안한후, 콘크리트 표준시방서에 제시된 방법과 비교하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.738-740
• /
• 2012

최근 변단면 거더의 경제성을 고려하여 장경간 거더 교량과 강골조 구조물에 변단면보의 사용이 증가하고 있으며, 고강도 강의 등장으로 인해 변단면보의 정확한 좌굴 강도의 평가가 매우 중요시 되고 있다. 본 논문에서는 기존에 연구된 탄성 횡-비틀림 좌굴 강도에 관한 연구를 바탕으로하여 별로 비탄성 구간에 비지지 길이가 존재하는 일축대칭 I형 변단면보의 횡-비틀림 좌굴 강도 해석을 실시하였다. 해석에는 유한요소해석프로그램인 ABAQUS(2007)가 사용되었으며, MINITAB(2006)을 이용하여 간편한 설계식을 제안하고 있다. 일단 계단식 단면을 가지는 보에 대하여 고려하였으며, 플랜지 길이 방향 비, 너비방향 비, 두께의 비로 계단식 I형 보를 나타내었다. 집중 하중을 적용시켰으며 비선형 해석을 위해 잔류응력 및 초기변형과 재료비선형을 고려하였다. 본 연구 결과에서 제안된 식은 향후 다양한 하중이 작용하는 비탄성 횡-비틀림 좌굴 강도에 대한 연구에 많은 도움이 될 것이다.

• Journal of the KSME
• /
• v.20 no.4
• /
• pp.296-302
• /
• 1980

이상에서 potential energy의 극소조건을 각종경우에 적용하여 재료역학의 해 또는 변형의 근사 해를 응용 예들을 통하여 구해 보았다. 이 해법은 을 받은 부재, 보(beam) 또는 순수 비틀림을 받는 엔형봉재의 경우, 부정정 문제에서 그 지지점들에서의 반력요소를 생각할 필요가 없기 때 문에 재료 역학적인 해법보다 더 간편하게 구해지고 있는 것을 볼 수가 있다. 또 보의 처짐 곡 선이 길이의 중앙면에 대하여 좌우 대칭형일 때에, 중앙단면에서의 최대처짐을 구하는데 삼각 함수의 근사처짐 곡선을 설정하므로써 실제 엄밀해에 가까운 근사값이 간단하게 구해질 수 있는 것을 보였다. 이 극소에너지 정리는 엔형단면이 아닌 각종 단면봉재의 비틀림 문제에서도 비틀림 응력함수를 도입하고, 경제조전을 만족하는 근사공력 함수방정식을 가정함으로써 간단하게 그 근사해를 구하는 데까지 직장할 수가 있다.