• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.90-98
• /
• 1998

본 논문은 2차원 해면효과의 수치계산 결과를 정리하였다. 지면으로부터의 높이변화에 따른 점성유동장을 계산하기 위하여 지배방정식으로는 비압축성 RANS방정식을, 시간에 대하여 서는 음해법으로 프로그램을 구성하였다. 압력항은 가상압축성을 도입 4차 수치확산항을 추가하는 것에 의해 계산하였으며, 높은 레이놀즈수에서의 효과적인 계산을 위해 Baldwin-Lomax 난류 모델을 도입하였다. 해면효과가 없는 무한유중에서의 NACA-0012단면 계산결과를 실험데이터와 비교하는 것에 의해 프로그램의 타당성을 확인하였다. NACA-6409와 두께비 $4.6\%$의 날개에 대하여 해면효과를 고려한 계산을 수행하였다. 높이의 변화에 따라 계산된 무차원계수, 압력 및 속도분포는 해면효과의 특성을 잘 보여주고 있다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.117-120
• /
• 2012

20인승 급 소형 위그선의 운항조건을 고려하여 순항 시 WIG선의 양항비를 최대로 할 수 있는 에어포일 형상 설계 기초연구를 수행하였다. WIG선의 순항 받음각 하에서 NACA 4 digit 에어포일의 최대 캠버 위치, 최대 캠버, 두께를 변화 시켜가며 수치해석을 수행하였다. 그 결과 최대캠버 8 미만에서 두께가 두껍고 최대캠버가 클수록 양항비가 높게 나타나는 경향을 확인할 수 있었으며, NACA6412 에어포일이 전반적으로 가장 우수한 양항비를 나타내었다.

• 전기의세계
• /
• v.27 no.6
• /
• pp.9-13
• /
• 1978

유도기의 사용환경이나 기기응용범위의 확대에 따라 수요자의 요구사양이 다양화하며 전용화하는 경우가 뚜렷하여 지고 있다. 그로인하여 극수변환을 하는 유도전동기에 있어서도 동일철심에 극수가 다른 두개 이상의 권선을 삽입하는 경우가 많다. 이때 운전중인 한쪽 권선에 의한 자속이 다른 권선에 쇄교되어 전압이 유기될 경우가 있다. 이 유기전압은 두 코일의 권선극수비에 따라 권선재에서 상살되던가 아니면 상살하고자 권선내에 순환전류가 흐른다. 이 순환전류의 흐름을 판별하려면 개개의 코일유기전압을 vector합성하여 검토하여 보면 알 수 있다. 이 vector합성 결과에 따르면 유기전압 상살여부는 권선의 종류가 정하여 지면 일반적으로 극수비에 따라 일의적으로 정하여 지는 성질을 가지고 있다. 그러므로 극수변환유도전동기를 다각도로 분석검토하여 각종권선에 따른 순환전류의 문제를 이론적으로 해석한 결과로 순환전류판별법을 설명하고자 한다.

• Journal of Institute of Convergence Technology
• /
• v.4 no.1
• /
• pp.37-41
• /
• 2014

For the analysis of lifting surface at high angle of attack, a Nonlinear Vortex Lattice Method(NLVLM) was used. The NLVLM is intented to compute the interactions between lifting surfaces and separated vertical flow. The lifting surfaces are represented by a lattice of discrete vortex rings. And wakes are represented by families of non-lintersecting, semi-infinite vortex line segments. The image method also used to analyze the ground effect. It is found that vortex lines separated from lifting surfaces represent the separated flows successfully. Although the present method is applied for the rectangular wing and delta wing, extensions can be possible for the arbitrary lifting surfaces. The Present results show good agreement with experimental data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.6
• /
• pp.602-609
• /
• 2021

Aircraft radar has special function which is ranging from aircraft to ground of antenna boresight. Because ranging information is used to calibrate altitude of aircraft or to drop a conventional bomb, the measuring have to be precise and robust. Therefore, we propose a simple and efficient method using monopulse radar for ground ranging. Proposed method calculates balancing weight according to linearity of monopulse ratio and mixes two ranging measurements in proportional to the weight. By exploiting balancing weight, radar is able to react to various environment as monopulse ratio contains characteristics of clutter environment. As a result, robust ranging information can be achieved. We use DEM(Digital Elevation Model) in order to simulate heterogeneous environment. In experimental result, it is shown that proposed method shows better accuracy and precision in any environment.

• The Korean Journal of Applied Statistics
• /
• v.27 no.2
• /
• pp.169-183
• /
• 2014

Massive and various types of data recorded everywhere are called big data. Therefore, it is important to analyze big data and to nd valuable information. Besides, to standardize unstructured big data is important for the application of statistical methods. In this paper, we will show how to standardize unstructured big data using MapReduce which is a distribution processing system. We also apply simple correspondence analysis and multiple correspondence analysis to nd the relationship and characteristic of direct relationship words for Samsung Electronics and The Korea Economic Daily newspaper as well as Apple Inc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.269-272
• /
• 2015

this is the study of the human body antenna device which can detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal using superhigh frequency RF beam equipped with the body. and it is able to transmit the data of the detection of the powder, battle combats can share that among them. with its flexible roof radial antenna structure, it emits the superhigh frequency RF beam to the front and flank multiply, preprocesses through the powder preprocessing part. and with the non-linear regression model algorism engine part, reflecting the attenuation characteristics depend on the delayed time of degree of the signal power which is received to the superhigh frequency RF beam. so it is able to detect the signal of the most likely mine or powder based on the degree of the answer signal power according to the delayed time of the superhigh frequency RF beam. also, it can detect the powder whether it is metal or nonmetal, mine, dud, VBIED. it can increase the chance of detection about 90% more than existing mine detector.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.979-987
• /
• 2012

This paper implements and integrates algorithms for terrain following of UCAVs (Unmanned Combat Aerial Vehicles): trajectory generation, guidance, and navigation. Terrain following is very important for UCAVs because they perform very dangerous missions such as Suppression of Enemy Air Defences while the terrain following can improve the survivability of UCAVs against from the air defence systems of the enemy. To deal with the GPS jamming, terrain referenced navigation based on nonlinear filter is chosen. For the trajectory generation, Voronoi diagram is adopted to generate horizontal plane path to avoid the air defense system. Cubic spline method is used to generate vertical plane path to prevent collisions with ground while flying sufficiently close to surface. Follow-the-Carrot and pure pursuit tracking methods, which are look-ahead point based guidance algorithms, are applied for the guidance. Numerical simulation is performed to verify the performance of the integrated terrain following algorithm.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.27-32
• /
• 2005

DEM is needed for urban modeling, forecasting of floods and the analysis of slope and aspect. It has been generated using digital maps, aerial photos or satellite imageries. Recently, however, many studies on DEM generation from LiDAR data has been conducted because of its efficiency and accuracy. Filtering is said to be the process of making DEM by eliminating non-ground points from LiDAR data. In most researches, some input parameters such as the size of filter are required. The purpose of this investigation is to automatically obtain DEM by eliminating objects of various sizes without the knowledge of the objects' sizes. The experimental results show that most of objects on steep terrain are eliminated by the proposed method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.2
• /
• pp.113-118
• /
• 2012

Most of the existing multiped walking robots are biomimetic, i.e. they are designed to have the shapes of living things such as animals or insects. Even though those robots are familiar to us, they have some drawbacks in the view point of walking efficiency such as stability and walking speed. In this paper, we introduce a quadruped walking robot that can perform fast and stable walking by virtue of its distinctive leg positions. The proposed quadruped robot has a foreleg, a hindleg, a left leg, and a right leg. In the conventional robots, dynamic walking is needed to increase walking speed. Dynamic walking is difficult to be accomplished and is apt to be unstable. The proposed robot can move its legs in a manner that its center of gravity is always laid in the supporting polygon, so it can perform fast and stable walking without dynamic walking.