• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.461-461
• /
• 2016

이상기후로 인하여 제방붕괴에 대한 위험성이 높아지고 있고, 이로 인해 발생하는 제내지 내 붕괴 홍수파에 대한 연구가 증가하고 있다. 특히 홍수파 선단의 이동 속도 추정은 제내지의 위험성을 예측하고, EAP 등을 수립하는데 매우 중요한 자료가 될 수 있다. 제내지에서의 선단 홍수파에 대한 예측을 하기 위해서는 해당 지역의 하천특성, 수리특성 및 제방 등 수공구조물 특성뿐만 아니라, 제내지의 지형 및 토지이용 현황 등을 조사하여 수리실험이나 수치모의를 수행해야 하는 것이 일반적이다. 수치해석의 경우 수리실험에 비하여 경제성 및 효율성 측면에서 뛰어날 수 있으나, 제방 붕괴과정 및 메커니즘을 반영하기가 불가능하다. 이에 반해 수리모형실험의 경우 제방붕괴 양상 및 그 과정의 재현이 가능하기 때문에, 제내지에서의 선단홍수파 전파에 관한 보다 정확한 양상을 파악할 수 있을 것이다. 그러나 이러한 실험은 실제 크기의 하천이 아닌 축소모형 또는 개수로에서 수행되었기 때문에, 초기 홍수파의 전파가 축척효과(Scale effect)의 영향을 받을 가능성이 매우 크다. 특히 선단 홍수파의 경우 파가 진행되면서 수심이 낮아지고, 유속이 느려지기 때문에 그 영향은 점차 증대된다고 할 수 있다. 이에 본 연구에서는 이러한 초기 선단 홍수파의 표면장력 영향을 고려한 보정 계수 산정에 대한 연구를 수리실험을 통해 수행하였다. 연구는 크게 4가지 과정으로 구성되었다. 첫째는 농도-표면장력의 관계 규명이며, 둘째는 표면장력-홍수파 전파 속도 관계 규명이다. 셋째는 표면장력과 Weber Number(We)의 관계를 도출하는 것이며, 마지막은 We를 이용하여 한계조건을 제시하는 것이다. 실험은 계면활성제의 농도를 변화시켜가며, 얇은 유리관(D=1.0 mm)에서 물의 상승 높이 및 접촉각을 측정하여 농도와 표면장력의 관계를 측정하였으며, 이러한 결과를 바탕으로 물의 표면장력을 변화시켜 가며 $0.5(B){\times}0.3(L){\times}0.2(H)m$의 Head-tank에 설치된 수문을 빠르게 개방하여, 홍수파가 퍼지는 양상을 관측하였다. 홍수파의 이동 속도는 진행시간에 따라서 퍼짐 넓이를 측정하여 제곱근을 취하는 방식으로 평균속도를 산정하였다. 이러한 관계를 이용하여 표면장력이 없을 경우의 이동속도 및 ??를 도출하였다. 본 연구를 통해 홍수파 전파 특성에 대한 수리실험 자료를 바탕으로 Weber 수를 도출하여 표면장력의 영향을 받는지 여부를 판단할 수 있으며, 표면장력의 영향을 받을 경우, 제시된 결과를 이용하여 홍수파 선단의 속도를 보정할 수 있다. 본 연구 결과는 토대로 축소모형으로 수행되는 홍수파 전파에 대한 수리실험결과의 보정 기초자료로 매우 유용할 것으로 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.899-909
• /
• 2021

In Musculoskeletal ultrasound examination, a linear transducer (12-5 MHz) with a contact surface length of 6 cm, which is commonly distributed in medical institutions, does not contact with bent fingers and wrist depressions only by using a conventional liquid ultrasound gel, which causes image loss. In order to solve this image loss, the use of commercially available Water gel pad is increasing. However, it is a disposable medical product. Repeated use is prohibited and expensive. In this study, in order to reduce the economic burden caused by the use of the commercialized Water gel Pad, we searched for water-soluble food thickener powder that can be easily purchased around our lives and manufactured Gel pads. Among them, kappa-Carrageenan Gel Pad, iota-Carrageenan Gel Pad, and Agar-Agar Gel Pad satisfied the evaluation criteria without artifacts in image evaluation using the N-365 Multipurpose Phantom. Also, the price to purchase the food thickener powder was about 38 times cheaper than the existing commercialized Water gel pad. As a result, if you use the food thickener powder such as kappa-Carrageenan, iota-Carrageenan and Agar-Agar to make solidified elastic Gel pad without a cover instead of the commercially available expensive disposable Water gel pad, the convenience and usefulness of use are improved. It is judged that the manufactured Gel pads can contribute well to the role of efficient ultrasound propagation medium.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.2
• /
• pp.77-85
• /
• 2024

The suspension device that connects the prosthetic leg and the residual limb allows lower limb amputees to wear prosthetic limbs, and is the most sensitive part when using prosthetic limbs as it is always in contact with the residual limb not only while walking but also in everyday life. In this paper, using the principles of attraction and repulsion of permanent magnets, we developed a magnetic lock suspension device that can fix the amputees and prosthetic legs of lower limb amputees by changing the polarity of the magnet. The operation method of the magnetic lock is that when neodymium magnets are placed on the left and right as NNSS based on a non-magnetic brass core, the magnetic force flows outward beyond the brass core using the adsorption member as a medium to generate bonding force. When rotated 90 degrees, the magnet moves to NSNS. The principle is that as the position moves, the magnetic force flows inward and cancels out.Based on this, we conducted a bonding test using tensile strength and a short-term comparative evaluation of the prosthesis with the shuttle lock suspension system, which was a comparison group, to verify reliability and evaluate satisfaction with the prototype. As a result, the tensile strength exceeding the appropriate bonding strength was confirmed, and the magnetic lock showed higher satisfaction than the shuttle lock. In the future, we plan to conduct long-term ADL clinical trials for commercialization and develop a product that can be distributed to actual amputees.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1280-1286
• /
• 2006

Three different virgin activated carbons made of each coal(Calgon), coconut(Samchully) and wood(Picabiol) based activated carbon(AC) were tested for an adsorption performance of 1,4-dioxane in a continuous adsorption column. Breakthrough behavior was Investigated that the breakthrough points of coal, coconut and wood based AC were observed as 3600 bed volumn(BV), 1440 BV and 144 BV respectively. Adsorption capacity(X/M) of coal, coconut and wood based AC was observed. The reported results of adsorption capacity showed that coal based AC was highest(578.9 ${\mu}g/g$), coconut based AC was intermediate(142.3 ${\mu}g/g$) and wood based AC was lowest(7.4 ${\mu}g/g$) due to increasing specific surface area. Moreover, carbon usage rates(CURs) for coal, coconut and wood based AC had been shown as 0.48 g/day, 1.41 g/day and 6.9 g/day respectively. The constant characteristic of the system, k of coal based AC was found to be 91.5 and k of coconut based AC was found to be 17.9. Removal efficiencies of 1,4-dioxane with different ozonation dosages(2 and 5 mg/L) for 20 min ozonation had been shown 38% and 87% respectively. There was no observation for biological removal of 1.4-dioxane by attached micro-organisms when used(3.1 years and over 5 years) biological activated carbon(BAC) without pretreatment of oxidation were employed. When a combination of ozonation(2 mg/L and 5 mg/L) and BAC process for $10{\sim}30$ min was applied, removal efficiency for 1,4-dioxine increased only $2{\sim}6%$ compared to only applying ozonation. Therefore removal efficiency of BAC process prior to using oxidation was proven to negligible. Consequently, the results presented in this paper provide a better insight into the adsorption performance of 1,4-dioxane. This observation suggests that using virgin activated carbon made of coal is the best selection for removal of 1,4-dioxane in the water treatment for an advanced treatment. It is clear from this research that longer EBCT for ozonation or higher ozone concentration are more effective operation methods for removal of 1,4-dioxane than longer EBCT in the BAC process.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.7-16
• /
• 2016

Purpose : This study aimed to compare and evaluate between the efficiency of two respective devices, 3D-bolus and step-bolus when the devices were used for the treatment of patients whose chest walls were required to undergo the electron beam therapy after the surgical procedure of modified radical mastectomy, MRM. Materials and Methods : The treatment plan of reverse hockey stick method, using the photon beam and electron beam, had been set for six breast cancer patients and these 6 breast cancer patients were selected to be the subjects for this study. The prescribed dose of electron beam for anterior chest wall was set to be 180 cGy per treatment and both the 3D-bolus, produced using 3D printer(CubeX, 3D systems, USA) and the self-made conventional step-bolus were used respectively. The surface dose under 3D-bolus and step-bolus was measured at 5 measurement spots of iso-center, lateral, medial, superior and inferior point, using GAFCHROMIC EBT3 film (International specialty products, USA) and the measured value of dose at 5 spots was compared and analyzed. Also the respective treatment plan was devised, considering the adoption of 3D-bolus and stepbolus and the separate treatment results were compared to each other. Results : The average surface dose was 179.17 cGy when the device of 3D-bolus was adopted and 172.02 cGy when step-bolus was adopted. The average error rate against the prescribed dose of 180 cGy was -(minus) 0.47% when the device of 3D-bolus was adopted and it was -(minus) 4.43% when step-bolus was adopted. It was turned out that the maximum error rate at the point of iso-center was 2.69%, in case of 3D-bolus adoption and it was 5,54% in case of step-bolus adoption. The maximum discrepancy in terms of treatment accuracy was revealed to be about 6% when step-bolus was adopted and to be about 3% when 3D-bolus was adopted. The difference in average target dose on chest wall between 3D-bolus treatment plan and step-bolus treatment plan was shown to be insignificant as the difference was only 0.3%. However, to mention the average prescribed dose for the part of lung and heart, that of 3D-bolus was decreased by 11% for lung and by 8% for heart, compared to that of step-bolus. Conclusion : It was confirmed through this research that the dose uniformity could be improved better through the device of 3D-bolus than through the device of step-bolus, as the device of 3D-bolus, produced in consideration of the contact condition of skin surface of chest wall, could be attached to patients' skin more nicely and the thickness of chest wall can be guaranteed more accurately by the device of 3D-bolus. It is considered that 3D-bolus device can be highly appreciated clinically because 3D-bolus reduces the dose on the adjacent organs and make the normal tissues protected, while that gives no reduction of dose on chest wall.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.1
• /
• pp.201-230
• /
• 2001

Conserving the recored cultural inheritance is actually the duty of all of us. Above all, the management and conservation of archives and documents is up to archivists who have technical knowledge about archival science. Archivists have to not only conserve archives and documents but also carry out classifying and appraising them in order to define them as current historic ones. The fundamental education about archival science is made up of history and law. Because Archive is the organisation which manage archives and documents produced by legal and administrative actions. Although there are still arguments about technical knowledge and degree archivists have to acquire, most of them prefer the studies related with history and emphasize legal studies to be the general boundary of archivits' ideology and trust. The training course about conservation of archives is conducted in about 9 National Archives of Torino, Milano, Venezia, Genova, Bologna, Parma, Roma, Napoli, Palermo. The training course in 19th was mostly based on the lectures of Phaleography, Diplomatics. There were not the education about archival science yet. Toward the end of 19th and 20th, people stressed the most basic subject in the training course of National Archive was not Phaleography and Diplomatics but archival science. The goal of archival science is to study the institution and organisation transferring archives and documents to Archive. And also it help archivists not wander about with ignorance of organisational and original procedures and divisions but know exactly theirs works. Like this, the studies on institution and organisation have got in the saddle as a branch of archival science since a few ten years. While archival science didn't evoke sympathy among people and experienced the tedious and difficult path in italy and other countries, Archive was managed by experts of other branches. As a result, there were a lot of faults in Archival Science. Specializing training course for Italian archivists came into being under the backdrop of Social Science Institute of Roma National University in 1925. The archival course of universities accomplished by the studies of history, law and economy. And such as Eugenio Casanova and Giorgio Cencetti were devoted archival science was abled to settle down in national archive. The training course for experts of 'archival science, 'Phaleography and Diplomatics' in National Archive of Bologna(Archivio di Stato di Bologna) is one of courses conducted in 17 National Archives in italy. This course is gratuitous and made up of 8 subjects(Archivistica, Paleografia, Diplomatica, Storia dell' Archivio, Notariato e documenti privati, istituzione medievale, istituzione moderna, istituzione contemporanea) students have to complete for two years. Students can receive the degree through passing twice written exam and once oral test. After department of Culture and education finally puts the marks of students, the chief Nationa Archive of Bologna confer the degree of 'archival science Phaleography and Diplomatics' on students passing the exams. This degree authenticates trainees' qualification which enables him to work at the archive in province, district and administrative capital city and archive of comunity and so on. Italian training course naturally leads archivists to keep in contact with valuable cultural inheritance through training in Archive. And it shows the intention to strengthen the affinity with each documents in the spot of archival management before training archivists. Also this is appraised as one of positive policies to conserve the local cultual inheritante in connection with the original qualitity of national archive with testify the history of each region. Traning course for archivist in Italy shows us the way how we have to prepare and proceed it. First, from producing documents to conserving than forever there has introduced 'original order that is to say a general rule to respect the first order given at the time producing documents'. Management of administrative documents is related consistently with one of historical documents. Second, the traning course for archivist is managing around 17 national archives. because italian national archive lay stress not or rducation of theory bus on train for archivest working in the first time of archival science. Third, diplomatics and phaleography for studies about historical document support archives. Forth, the studies on history id proceeding by cooperation between archivist and historian around archive. How our duties is non continuinf disputer who has to conserve and manage document and archives, but traing experts who having ability, vision and flexible thought, responsibility about archivals.