• Title/Summary/Keyword: 비이커 경도

Search Result 5, Processing Time 0.02 seconds

Microstructure and Hardness Distributions of $CO_2$ Lser Hrdened 12%-Cr Seel (12%-Cr 강의 $CO_2$ 레이저 표면경화에서 금속조직과 경도분포)

  • 김재도
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.10
    • /
    • pp.1861-1868
    • /
    • 1992
  • Laser beam hardening of 12%-Cr steel has been evaluated by using a continuous wave 3kW co$_{2}$ laser with a hardening mirror set. Experiment was performed on the hardening condition with a laser power of 2.85kW and travel speed of 1.0 and 1.5m/min. Multi passes have been also tried to find the hardening characteristics of partly overlapped zone. The black paint to use at high temperature was adopted to increase the absorptivity of laser beam energy with the wavelength of 10.6.mu.m at the surface of base metal. The microstructure of the hardened layers was observed by using a light microscopy, SEM and TEM. A fine Lamellar martensite formed in the hardened zones exhibits very high Vickers microhardness of 600Hv, whereas the tempered martensite distributes in the base metal with Vickers microhardness of 240Hv.It has been found that laser hardening with multi passes showed no significant drop of the hardness between adjacent passes.

대구 수정란의 질병 제어에 의한 부화율 향상 연구

  • 박상언;권문경;이채성;김완기;이정용
    • Proceedings of the Korean Aquaculture Society Conference
    • /
    • 2003.10a
    • /
    • pp.64-64
    • /
    • 2003
  • 대구 인공종묘 생산 기술 개발의 일환으로 수정란에 기생하여 폐사를 유발하는 세균 및 세균 감염 경로를 파악함으로써 수정란의 생존율과 부화율 향상을 위하여 본 실험을 실시하였다. 세균 감염 경로를 파악하기 위하여 난소와 정소 자체 세균 감염 여부를 조사하였다. 일반배지 (BHIA)와 비브리오 선택배지 (TCBS)를 사용하여 세균검사를 실시하였다. 난소의 세균 검사는 생식소 내부를 일부 절개한 후 멸균 roop를 찔러 세균을 검사하였고, 정소는 채정하기 전 복부를 절개하여 멸균 roop로서 적출하여 배지에 도말한 후 배양하였다. 수정란 내 세균 수는 수정란을 각각 20개씩 샘플하여 난 외부에 기생하는 세균을 제거하기 위하여 난소독제로 이용되고 있는 benzalkonium 0.1%로 1분간 소독한 후 멸균 생리식염수로 3회 세척하여 호모게나이즈하여 검사하였다. 호모게나이즈한 액 중 100${\mu}\ell$를 pipetting하여 일반배지(BHIA)에 도말하여 인큐베이터에서 배양하였다. 난소와 정소 내에서 세균이 검출됨에 따라 수정 시 세균 감염을 억제하기 위하여 자외선 살균해수와 일반해수를 수정액으로 사용하여 발생율을 비교 시험하였다. 수정 시간은 1분으로 동일하게 적용하였으며, 수정 용기는 멸균 처리된 일회용 100$m\ell$ 플라스틱 용기를 사용하였다. 수정 후 과다한 정자를 제거하기 위한 세란은 1$\ell$ 멸균 비이커에서 5회 30분 가량 실시하여 정자를 제거하였고 멸균 봉으로 저어주면서 수정란의 점착력을 제거하였다. 수정란은 100$\mu\textrm{m}$ 그물망으로 수정란 유실을 방지한 플라스틱 용기에 수용하여 유효수량 270$\ell$ FRP 수조에 수용하여 3$\ell$/min 환수하였고, 수온은 자연수온 1$^{\circ}C$로 유지하였다. 발생율은 만능투영기로 3회 측정하였다. 수정 후 세균과 기생충에 의한 수정란의 폐사를 억제하기 위하여 수정 직후, 수정 후 1일, 2일째 oxytetracycline과 iodine 처리에 따른 발생율 변화를 조사하였다. 발생율은 만능투영기로 조사하였고, 시험구별로 3회 측정하였다. 경과 일수별로 약제 처리는 약제 미처리 수정란 중 정상적인 발생이 이루어지고 있는 것을 선별하여 조사하였다. 약제 처리에 따른 배체 발생 단계는 수정 후 1일째는 상실기, 2일째는 포배기였다. 수정란 및 대구 자어에서 분리된 V. splendidus 에 의한 폐사를 예방하기 위해 in vivo에서 oxytetracycline 외 5종의 항생제를 대상으로 96well plate에서 최고 농도 250ppm부터 2 fold로 단계 희석하여 $25^{\circ}C$에서 48시간 배양하여 MIC를 조사하였다. 세균 감염경로 파악을 위하여 난소, 정소 및 정자에서 세균을 분리한 결과 일반배지 및 비브리오 선택배지에서 모두 균이 검출되었고, 균 동정 결과 터봇 자어에서 검출된 것으로 보고된(Gatesoupe et al., 1999) V. splendidus로 나타났다. 수정액과 정자 및 미수정란의 세균 분리 결과 일반배지에서 3$\times$10/ml ~ 7$\times$10/ml로 균이 검출되었다. 수정액을 일반해수와 자외선 살균 해수를 사용하여 발생율을 비교한 결과 수정 후 3일째 발생율은 자외선 살균해수 72.3%, 일반해수 52.7%였으며, 수정 후 7일째 40.9%와 25.1%로 자외선 살균해수가 유의적으로 높게 나타났다. 수정 후 경과 일수별로 oxytetracycline과 Iodine을 처리한 결과 수정 직후 처리한 시험구는 7일째 19.8%와 18.9%로 대조구 23.1%와 유의적인 차이가 없는 것으로 나타났다. 수정 후 1일째 처리한 시험구는 54.5%와 56.8%, 수정후 2일째 처리구는 47.9%와 50.6%로 두 시험구 모두 대조구와 수정 직후 처리구보다 유의적으로 높게 나타났다. 수정란 및 대구 자어에서 분리된 V. splendidus 에 의한 폐사를 예방하기 위해 in vivo에서 항생제 종류별 MIC 조사 결과 oxytetracycline이 0.48ppm으로 가장 효과가 높은 것으로 나타났다.

  • PDF

A Study on the Validation of Effective Angle of Particle Deposition according to the Detection Efficiency of High-purity Germanium Gamma-ray Detector (고순도 저마늄 감마선 검출기의 검출효율에 따른 유효입체각 검증에 관한 연구)

  • Chang, Boseok
    • Journal of the Korean Society of Radiology
    • /
    • v.14 no.4
    • /
    • pp.487-494
    • /
    • 2020
  • The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (60Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

Combination Culture of Rotifer Brachionus rotundiformis and Copepod Apocylops sp. (로티퍼 Brachionus rotundiformis와 코페포다 Apocyclops sp.의 혼합 배양)

  • Jung, Min-Min;Rho, Sum
    • Journal of Aquaculture
    • /
    • v.11 no.4
    • /
    • pp.449-455
    • /
    • 1998
  • The small size food organism(under the size 150${\mu}m$) is needed as food for early stage of marine fish larvae of small mouse (e.g the group of grouper). This study was investigated to develop a method for copepod Apocyclops sp. culture in combination with the rotifer B. rachionus for stable culture of copepod species and harvest of various size food organisms. The culture conditions as temperature, salinity, culture volume, photo period, culture preiod and observation interval were 25${\circ}C$, 22ppt, 40ml, all dark except to observation time, 16 days and every two day during the experimental period, respectively. The Tetraselmis suecica was used as the food for the two testing orgtanisms. After every two day counting, theses two organisms were transferred to fresh culture tanks with Tetraselmis suecica of $7{\times}10^5$cells/ml. In the mixed culture of B. rotundiformis and A. sp., growth of rotifer was suppressed by mixed culture with A. sp. whereas the growth of copepod Apocyclops was promoted in the mixed culture with rotifer B. rotundiformis (the maximum density was 22 individuals/ml through the 16 culture days). Moreover, the number of copepod nauplius were promoted about 2 times in the mixed culture compared to the numbers in single species culture. With this combination culture, the havested two food organisms of variable sizes. This size variation of food organisms was useful tools for larval rearing of small mouse marine fish larvae and next step food organism size of post hatched larvae.

  • PDF

The pH Reduction of the Recycled Aggregate Originated from the Waste Concrete by the scCO2 Treatment (초임계 이산화탄소를 이용한 폐콘크리트 순환골재의 중성화)

  • Chung, Chul-woo;Lee, Minhee;Kim, Seon-ok;Kim, Jihyun
    • Economic and Environmental Geology
    • /
    • v.50 no.4
    • /
    • pp.257-266
    • /
    • 2017
  • Batch experiments were performed to develop the method for the pH reduction of recycled aggregate by using $scCO_2$ (supercritical $CO_2$), maintaining the pH of extraction water below 9.8. Three different aggregate types from a domestic company were used for the $scCO_2$-water-recycled aggregate reaction to investigate the low pH maintenance of aggregate during the reaction. Thirty five gram of recycled aggregate sample was mixed with 70 mL of distilled water in a Teflon beaker, which was fixed in a high pressurized stainless steel cell (150 mL of capacity). The inside of the cell was pressurized to 100 bar and each cell was located in an oven at $50^{\circ}C$ for 50 days and the pH and ion concentrations of water in the cell were measured at a different reaction time interval. The XRD and SEM-EDS analyses for the aggregate before and after the reaction were performed to identify the mineralogical change during the reaction. The extraction experiment for the aggregate was also conducted to investigate the pH change of extracted water by the $scCO_2$ treatment. The pH of the recycled aggregate without the $scCO_2$ treatment maintained over 12, but its pH dramatically decreased to below 7 after 1 hour reaction and maintained below 8 for 50 day reaction. Concentration of $Ca^{2+}$, $Si^{4+}$, $Mg^{2+}$ and $Na^+$ increased in water due to the $scCO_2$-water-recycled aggregate reaction and lots of secondary precipitates such as calcite, amorphous silicate, and hydroxide minerals were found by XRD and SEM-EDS analyses. The pH of extracted water from the recycled aggregates without the $scCO_2$ treatment maintained over 12, but the pH of extracted water with the $scCO_2$ treatment kept below 9 of pH for both of 50 day and 1 day treatment, suggesting that the recycled aggregate with the $scCO_2$ treatment can be reused in real construction sites.