• Magazine of the Korea Concrete Institute
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1991

Moleclar size distribution of three AC-20 asphalt cements were observed using high pressure - gel permeation chromatograph (HP-GPC). Bituminous concrete specimens were made using the asphalt cements and one aggre¬gate in laboratory to measure mechanical properties, tensile strength CIS) and resilient modulusCM,J. in dry and wet conditons. Results of mechanical property tests and profile of molecular size distribution of asphalt cements were analyzed to evaluate the relatonship of mechanical property with chromatogram. Regression analy¬sis showed a strong correlation between a mechanical property and sliced percent areas of chromatogram. Mathematical prediction models were developed based on the regression analysis. It was shown that characteris¬tics of asphalt cement chromatogram could be successfully used for estimation of selected mechanical property of asphalt concrete .

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1653-1658
• /
• 2011

A novel circuit structure of dual-band bandstop filters is proposed in this paper. This structure comprises two shunt-connected tri-section stepped impedance resonators with a transmission line in between. Theoretical analysis from the equivalent circuit and design procedures are described. We represented graphs for filter design from the derived synthesis equations by resonance condition of circuits. Notably, advantages of the proposed filter structure are compact size in design, wide range of realizable resonance frequency ratio, and more realizable impedances.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.386-386
• /
• 2013

반도체 소자의 소형화, 고집적화로 박막의 다층화 및 선폭의 감소 등의 복잡한 제조 공정이 불가피하고, 따라서 공정 중 실리콘 웨이퍼와 금속 박막사이의 확산을 방지하기 위한 많은 연구가 이루어지고 있다. 하지만 현재까지의 연구는 확산방지막의 nano-mechanics 특성 분석에 대한 연구는 전무하다. 본 논문에서 tungsten (W)을 주 물질로, nitrogen (N)을 첨가한 확산방지막을 질소 유량을 2.5, 5, 7.5, 10 sccm으로 변화시켜가면서 rf magnetron sputter 방법으로 tungsten-nitride (W-N) 박막을 증착하였다. 박막의 기본 물성인 증착율, 비저항 및 결정학적 특성을 ${\beta}$-ray, 4-point probe, X-ray diffraction (XRD)를 이용하여 측정하였고, 측정결과 증착 중 질소 유량이 증가할수록 W-N 박막의 비저항은 증가하였고 반대로 증착율과 결정성은 감소하였다. 이는 기존의 연구 결과와 비교하여 일치한 결과로 증착된 박막이 신뢰성을 가짐을 확인하였다. 이후 가장 관심사인 nano-mechanics 특성은 nano-indenter를 이용하여 측정하였다. 측정 결과 시료는 증착 중 질소 유량이 2.5 sccm인 시료를 기준으로 5 sccm 포함된 박막에서 load force-depth 그래프가 급격히 변화하는 경향을 나타내었고, 표면강도(surface hardness)는 10.07 GPa에서 15.55 GPa로 증가하였다. 이후 질소 유량이 7.5 sccm과 10 sccm에서는 12.65 GPa와 12.77 GPa로 질소 유량이 5 sccm 포함된 박막보다 상대적으로 감소하였다. 이는 박막내 결정상으로 존재하는 질소와 비정질 상태로 존재하는 질소의 비율에 의한 것이고, 압축력에 기인하는 스트레스 증가로 판단된다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.2
• /
• pp.119-125
• /
• 2011

A novel circuit structure of dual-band bandstop filters is proposed in this paper. This structure comprises two shunt-connected tri-section stepped impedance resonators with a transmission line in between. Theoretical analysis from the equivalent circuit and design procedures are described. We represented graphs for filter design from the derived synthesis equations by resonance condition of circuits. Notably, advantages of the proposed filter structure are compact size in design, wide range of realizable resonance frequency ratio, and more realizable impedances.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.628-631
• /
• 2010

환경문제에 대한 관심으로 자동차에 대한 경량화가 요구되는 동시에 안전규제가 강화 되고 있어, 높은 인장강도를 가지는 고강도 강의 차체 적용 비율이 점차 증가하고 있다. 또한, 자동차 1대를 조립하기 위한 저항 점용접 횟수를 줄이고, 용접부에 충격안정성을 확보하기 위한 관심이 고조되고 있다. 따라서, 국내 자동차 산업에서 용접부의 신뢰성을 보장하기 다양한 비파괴 검사를 적용하고 있으며, 생산 공정에 적용하고 있다. 그중에서 용접 전극 사이에서 동저항(Dynamic resistance, 용접 공정중모재의 저항값의 변화)을 계측하여 용접성을 평가하는 방법이 제시되고, 차체 조립공정 중에 적용하려는 시도가 이루어지고 있다. 본 연구에서는 자동차 차체용 냉간 압연강판(590MPa dual-phase steel)을 인버터 DC 저항 점 용접하여, 용접전극 사이에서 동저항을 측정 하였다. 용접성은 인장전단 강도로 평가하였고, 용접 공정 변수는 용접 전류, 용접 시간, 가압력을 선정하였다. 동저항 그래프의 ${\alpha}$-peak와 ${\beta}$-peak값을 인장전단 강도에 따라 회귀 분석하여, 동저항에 따른 인장전단 강도를 예측하였다. 추가적으로, 용접부의 외관 형상 중에 압흔 깊이와 압흔자국 지름에 대한 회귀분석을 실시하였으며, 용접부 형상에 대한 신뢰성을 부여하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.796-799
• /
• 2006

This paper presents a new method for automatic detection of skew in a document image using mathematical morphology. To speed up processing, we use reduced image but it still requires long time to estimate the skew angle so the proposed method works with region of interest, not with whole image. Character strings are connected by using morphological closing operation and a component labeling is used to select region of interest. The method considers the lowermost pixels of characters in candidate regions in the binary image of original document image. Experimental results shows that the proposed method is extremely fast and robust as well as independent of script forms.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.529-538
• /
• 2012

This study analyzed a variety of different kinds of usage patterns of four-digit personal identification numbers(PINs) based on the data collected from students attending at A-university in 2011. According to the analysis, the 4 digit PINs '1234' was being used most frequently which is similar to the findings of the study by the Daniel Amitay research. In addition, almost 50 percent of the students were using the four-digit PINs closely related to their personal information, and more than 10 percent of them were using it only by the reason of easiness to remember or convenience to use. Number '0' was the most frequently used, and girl students used it more than boys did. According to the result of analysis of four-digit PINs, it was found that number '1' was the most frequently used in the first and the third position. It was also found that number '2' and number '4' were the most frequently used in the second and the forth position respectively. Among students who had used number 3 in third position, around 63.6 percent of those students were using number 4 in the forth position in their PINs which showed highest frequency from analysis of double-digits connected together in each position. The analysis of PINs were represented by the polygonal (type) graph with that X-axis showed from first to forth position and Y-axis showed number had been used at each position. Among many polygonal graphs, the form showed an N-type which was called in type 1 took the first place by 35 percent.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.135-144
• /
• 2011

Direct parameter estimation method is verified with various models based on Neyman-Scott rectangular pulse model (NSRPM). Also, newly modified NSRPM (NMSRPM) that uses normal distribution is developed. Precipitation data observed by Korea Meteorological Administration (KMA) for 47 years is applied for parameter estimation. For model performance verification, we used statistics, wet ratio and precipitation accumulate distribution of precipitation generated. The comparison of statistics indicates that absolute relative error (ARE)s of the results from NSRPM and modified NSRPM (MNSRPM) are increasing on July, August, and September and ARE of NMNSRPM shows 10.11% that is the smallest ARE among the three models. NMNSRPM simulates the characteristics of precipitation statistics well. By comparing the wet ratio, MNSRPM shows the smallest ARE that is 16.35% and by using the graphical analysis, we found that these three models underestimate the wet ratio. The three models show about 2% of ARE of precipitation accumulate probability. Those results show that the three models simulate precipitation accumulate probability well. As the results, it is found that the parameters of NSRPM, MNSRPM and NMNSRPM are able to be estimated by the direct parameter estimation method. From the results listed above, we concluded that the direct parameter estimation is able to be applied to various models based on NSRPM. NMNSRPM shows good performance compared with developed model-NSRPM and MNSRPM and the models based on NSRPM can be developed by the direct parameter estimation method.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.1-5
• /
• 2008

The inhibition of cholesterol autoxidation by commercial ${\gamma}$-Oryzanol (0, 50, 100, and 300 ppm) was studied in an aqueous model system for 20 h at pH 5.5 and $80^{\circ}C$. The inhibition effectiveness of the commercial ${\gamma}$-Oryzanol was followed by the retention of cholesterol and the formation of C-7 oxidized cholesterol derivatives (OCDs). Changes in the amount of ${\gamma}$-Oryzanol in the aqueous system were determined during cholesterol autoxidation. A method to detect the levels of 7-ketocholesterol, $7{\alpha}$-hydroxycholesterol and $7{\beta}$-hydroxycholesterol in an aqueous model system with ${\gamma}$-Oryzanol was developed by using the hexane-ethyl acetate extraction system and high-performance liquid chromatography. Results showed that the levels of C-7 OCDs in an aqueous dispersion containing 300 ppm of ${\gamma}$-Oryzanol were not significantly (p>0.05) increased, when compared to other treatments (0, 50, and 100 ppm), during the accelerated cholesterol oxidation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.46-51
• /
• 2006

Phosphorus accumulation in fertilized soils becomes serious problem for agriculture and the environment. In this investigation, we conducted a laboratory scale investigation to find the most desirable displacement methods of the adsorbed phosphate onto the soil particle surfaces. Soil samples which contained high amount of phosphate were collected at two different depths (0-10 cm and 10-20 cm) from four locations at the moderate highland located in Nonsan, Chungnam. To observe the mobilization of solid-phase phosphate, soil samples were equilibrated with oxalic acid solutions ranging from $10^{-5}$ to $10^{-1}cmol\;L^{-1}$ with the dilution factors of 1:1, 1:2.5, 1:5, 1:10, and 1:20. The mineralized P sharply increased as the concentration of oxalic acid was greater than $5{\times}10^{-4}cmol\;L^{-1}$ under dilution factors of 1:1, 1:2.5, and 1:5. The breaking concentration of oxalic acid was lowered to $10^{-4}cmol\;L^{-1}$ and $5{\times}10^{-5}cmol\;L^{-1}$ for dilution factors of 1:10 and 1:20, respectively. The curve fit obtained from the graph can be described by exponential growth when the dilution factors were 1:1, 1:2.5, and 1:5 while the sigmoidal shape for 1:10 and 1:20, showing the mineralization of P were significantly dependent on the dilution factor.