• Journal of the Korean Arthroscopy Society
• /
• v.5 no.2
• /
• pp.92-98
• /
• 2001

Purpose : To analyze the clinical results of isolated lateral meniscus injury according to discoid versus non-discoid, athletes versus non-athletes and repaired cases versus cases treated with meniscectomy. Materials and Methods : Between January 1997 and June 2000, arthroscopic lateral meniscus surgery was performed in 329 cases. We reviewed 80 cases of isolated lateral meniscus injury without associated ligament injury or other pathologic condition retrospectively. The study population was composed of 54 males and 26 females with average age of 30.2 years(range, $17\~40$ years). Average follow up period was 15 months(range, $12\~39$ months). Eighty cases were classified into three categories; discoid group versus non-discoid group, athletes versus non-athletes, repaired cases versus cases treated with meniscectomy. Clinical evaluation was performed using Lysholm knee score and Tegner activity. Results : Non-discoid group had higher incidence of longitudinal tear than discoid group. Athletes group had higher incidence of repaired cases than non-athletes group. The repaired group had better clinical result than patient treated with meniscectomy group. Conclusion : Although lateral meniscus has some special features including anatomic mobility which can cause instability after meniscectomy and technical difficulties in repairing, it is recommended repairing meniscus tear not only longitudinal but also horizontal and complex tear to obtain better clinical results.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1640-1645
• /
• 2004

The pumping characteristics of a single-stage disk-type drag pump ( DTDP ) are calculated,for the variation of the vertical clearance between a rotor and stator and of the radial clearance between a rotor and casing wall, by the three-dimensional direct simulation Monte Carlo (DSMC)method. The gas flow mainly belongs to the molecular transition flow region. Spiral channels of a DTDP are cut on the both the upper and lower sides of a rotating disk, but the stationary disks are planar. As a consequence of results, the vertical and radial clearances have a significant effect on the pumping performance. Experiments are performed under the outlet pressure range of 0.4 $^{\sim}$ 533 Pa. When the numerical results are compared to the experimental data, the numerical results agree well qualitatively.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.203-208
• /
• 2001

In this paper, the pumping performance of the three-stage disk-type drag pump which works in the outlet pressure range from 4 to 0.01 Torr is studied experimentally. The rotational speed of the pump is 24,000rpm, and nitrogen is used as a test gas, The pumping characteristics of various drag pumps are investigated. The inlet pressures are measured for various outlet pressures of the test pump. The maximum compression ratios for zero throughput are measured for three-stage, two-stage BSC type, helical-type, one-stage BSC type and one-stage OSC type, respectively.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.347-352
• /
• 2001

In this paper, the pumping performance of the two-stage disk-type drag pump which works in the outlet pressure range from 3 to 0.001 Torr is studied experimentally. The rotational speed of the pump is 24,000rpm, and nitrogen is used as a test gas. The pumping characteristics of various drag pumps are performed. The inlet pressures are measured for various outlet pressures of the test pump. The maximum compression ratios for zero throughput are 1000(two-stage BSC type), 740(helical-type), 90(BSC type) and 85(OSC type), respectively. The ultimate pressure of the two-stage disk-type drag pump is $8.1\times10^6$ Torr.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1501-1510
• /
• 2004

The pumping characteristics of a single-stage disk-type drag pump (DTDP) are calculated for the variation of the vertical clearance between a rotor and stator by the three-dimensional direct simulation Monte Carlo (DSMC) method. The gas flow mainly belongs to the molecular transition flow region. Spiral channels of a DTDP are cut on the both the upper and lower sides of a rotating disk, but a stationary disk is planar. The interaction between molecules is described by the variable hard-sphere model. The no time counter method is used as a collision sampling technique. The vertical clearance has a significant effect on the pumping performance. Experiments are performed under the outlet pressure range of 0.4∼533 Pa. When the numerical results are compared with the experimental data, the numerical results agree well quantitatively

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.752-756
• /
• 1998

산업용 및 의료용으로 사용되는 $^{192}$ Ir 방사선원에 대한 $\psi$선 자기흡수효과인자를 실험을 통하여 구하였다. 이를 위하여 3 mm $\psi$ x 3 mm t, 2.5 mm $\psi$ x 2.5 mm t, 2 mm $\psi$ x 2 mm Ir의 원주형 Ir 표적과 3 mm $\psi$ x 0.25 mm t, 3 mm $\psi$ x 0.1 mm t의 원판형 Ir 표적을 하나로의 PTS(Pneumatic Transport System)조사공에서 중성자 조사하였다. 이온전리함을 사용하여 각 Ir 표적의 방사능을 측정하고 계산에 의해서 구한 생성방사능 값과의 비를 구하는 방법으로 $^{192}$ Ir의 ${\gamma}$선 자기흡수효과인자를 구하였다. 이 값들은 원주형 표적에 대하여 각각 0.614, 0.687, 0.704 였고 원판형 표적에 대하여 각각 0.827, 0.875 였다. 원주형 Ir 표적내부의 중성자 자기흡수효과의 정도를 알아보기 위하여 2.5 mm $\psi$ x 0.25 mm t Ir 표적 10장을 포개어 중성자 방사화시킨 후 각 표적의 방사능을 측정한 결과 가장 바깥쪽 표적의 방사능이 중심부에 위치한 표적보다 약 2배정도 방사화가 많이 일어남을 알 수 있었다. 이번에 구한 ${\gamma}$선 자기흡수효과인자는 향후 산업용 및 의료용으로 사용되는 $^{192}$ Ir 방사선원의 사용자에게 제공되는 최종방사능을 평가하는데 유용하게 사용될 수 있다.

• Membrane Journal
• /
• v.10 no.3
• /
• pp.155-162
• /
• 2000

The reverse osmosis membrane housing(HY) was developed for excellent distribution of a feed solution, and the separation performance was compared with the commercialized Rochem(RC) system. The permeation flux of HY system was a little lower than that of RC system. On the other hand, the NaCl rejection ra4io was generally higher. Also, the permeation flux and rejection ratio for type A, B and C modules(disc plate and frame type) were measured using NaCl, sucrose and butanol solutions. The separation performance of type C module for NaCL and sucrose solutions was the most effective, and then those of type A and B were followed, respectively. However, the separation performance for butanol solution was type B, C and A order. The flux improvement ratio of type B to A increased as butanol concentration decreased or operating pressure increased up to 28 bar.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.159-162
• /
• 1998

폐수의 형태 및 성장과 막의 특성에 의해 한외여과는 처리수의 직접배출 또는 재 이용을 위해 사용되고 있다. 일본의 Masuda등은 1축 RDM을 사용하여 순수에서 회전에 따른 압력 강하를 관찰하고, 또 도시 하수처리 공정의 활성슬러지를 분리하기 위해 Aqua Renaissance '90프로젝트의 일환으로 도시 하수처리에 2축 RDM이 사용되었다. 동력학적 여과의 투과모델은 김제우 등에 의해 정립된 식을 이용하여 동력학적 여과기의 투과율(J)은 일반적으로 유효압력차($\DeltaP_T$), 벌크의 농도($C_B$) 그리고 회전속도 등에 의해 결정되어진다. 기존에 제시된 회전원판 모듈의 순수 투과에서 permeate side의 저항(Rp)값은 막자체의 저항(Rm)에 비해 상대적 작아 무시되었다. 본 연구는 1축 RDM 한외여과에서 투과율에 영향을 미치는 저항(R)에서 판자체에 변형을 주어 permeate side에서 저항(Rp)에 대한 영향에 관하여 연구를 수행하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.370-376
• /
• 2011

Recently, the application range of plastic gears is widely expanding by the development of engineering plastics with good mechanical properties. Plastic gears have excellent performances such as light weight, water resistance and vibration absorbing ability for metallic gears. In this study, the optimization of injection molding process was done for the large disk type plastic gears of auto phoropter. Design Of Experiment (Taguchi method) was adopted to find a tendency of molding conditions that influence the flatness of disk type gear. Four main factors for molding conditions were selected based on injection temperature, filling time, packing pressure and mold temperature. Also, Filling, packing and cooling analyses were carried out to evaluate Z directional deflection of large disk type gear by using the simulation software (Moldflow) based on the DOE. From the results, it was found that the injection temperature and packing pressure are the most sensitive parameters for the Z directional deflection of large disk type gears.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.860-869
• /
• 2000

Numerical and experimental investigations are performed for the molecular transition and slip flows in pumping channels of a disk-type drag pump. The flow occurring in the pumping channel develops from the molecular transition to the slip flow traveling downstream. Two different numerical methods are used in this analysis: the first one is a continuum approach in solving the Navier-Stokes equations with slip boundary conditions, and the second one is a stochastic approach through the use of the direct simulation Monte Carlo method. In the experimental study, the inlet pressures are measured for various outlet pressures in the range of 0.1{\sim}4Torr. From the present study, the numerical results of predicting the performance, obtained by both methods, agree well with the experimental data for the range of Knudsen number $Kn{\leq}0.1$ (i.e., the slip flow regime). But the results from the second method only agree with the experimental data for Kn>0.1(i.e., the molecular transition regime)