• Composites Research
• /
• v.29 no.6
• /
• pp.408-413
• /
• 2016

Commonly-used polymers are manufactured as versatile forms. Furthermore, continuous polymer fibers are recently manufactured using nylon or aramid fiber. One of common epoxy was also used to make polymer fibers. Bisphenol-A type was used as base epoxy whereas amine and anhydride were used as hardeners. Epoxy fibers was cured by stepping up the temperature to maintain the shape of epoxy fiber. Surface energy was measured to confirm the degree of interfacial adhesion by modified static contact angle method. After mechanical properties were measured via fiber tensile test, the evaluation of fiber fracture was proceeded. Tensile strength of epoxy fiber using amine type hardener was higher as 138 MPa than anhydride case as 70 MPa. Fractured surface exhibited different failure patterns at the cross-section.

• Journal of Adhesion and Interface
• /
• v.15 no.3
• /
• pp.100-108
• /
• 2014

In this work, a series of molar ratios composed with YD-128 and DDM were chosen based on the viscosity analysis. The mixtures of YD-128 and DDM with the different molar ratios were cured at $170^{\circ}C$ for 15 min followed by post cure at $190^{\circ}C$ for two hours. The thermal properties of the cured samples were investigated with DSC, TGA, DMA, and TMA. The conversion ratio of the mixtures of YD-128 and DDM (1 : 1.1) was calculated by dividing ${\Delta}H$ obtained from DSC experiments for each cured sample by ${\Delta}H$. The TGA data of the cured samples showed that the thermal stability and thermal degradation activation energy were proportional to the amount of DDM in the mixtures. However, the highest tan ${\delta}$, and the lowest thermal expansion data with DMA and TMA respectively were obtained from the stoichiometric mixture of YD-128 and DDM. Furthermore, the different ratio of mixtures were applied to test specimens to be cured at $170^{\circ}C$ to measure single lap shear strength with universal testing machine.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.270-277
• /
• 2016

BACKGROUND: Significant amount of bisphenol A has been released from the manufacturing process of plastics, epoxy resins, dental material and flame retardants. Bisphenol A has been detected at trace levels in wastewater, surface water, landfill leachate and drinking water. However, the residual survey of bisphenol A has not been performed in agricultural reservoir beside agricultural environment cultivating crops. This study was conducted to monitor the residual bisphenol A in national agricultural reservoirs and understand a level of contamination of bisphenol A in the agricultural environment in Korea. METHODS AND RESULTS: The water and water sediment were collected at agricultural reservoirs in Chungnam, Chungbuk, Kyunggi, Jeonnam, Jeonbuk, Kyungnam and Kyungbuk province. Bisphenol A was analyzed by the LC-MS/MS with triple quad 4500. The recovery of water and water sediment in the agricultural reservoirs showed the level of 95.7~97.2% and 91.5~100.3%, respectively. CONCLUSION: Bisphenol A was detected at the level of $0.05{\mu}g/L{\sim}0.18{\mu}g/L$ and $0.1{\mu}g/kg{\sim}34{\mu}g/kg$ in water and water sediment of the reservoirs, respectively. Based on the results, the residue of bisphenol A will be tried in the crops surrounding these agricultural reservoirs where bisphenol A detected above $10{\mu}g/kg$ of bisphenol A.

• Journal of Nutrition and Health
• /
• v.44 no.1
• /
• pp.61-73
• /
• 2011

The aim of this study was to develop a reliable dietary questionnaire to assess human exposure to food-borne hazards. Eleven food-borne hazards were chosen as a priority control list through a literature review and advisory committees. The 11 food-borne hazards were phthalate, aflatoxin, bisphenol A, polycyclic aromatic hydrocarbons, dioxin, polychlorinated biphenyls, mercury, lead, cadmium, arsenic, and acrylamide. The characteristics, exposure level, and paths of these hazards were reviewed, and questionnaire items were identified to assess human exposure from the literature. A questionnaire was developed for each selected food based on its characteristics. Based on the items in the individual questionnaires, a comprehensive questionnaire, which contained demographic characteristics, job information, socioeconomic factors, health related lifestyles, and dietary behaviors, was developed. A 99-item food frequency questionnaire (FFQ) to assess food-borne hazard exposure was also developed. The FFQ included frequency of food intake during the previous year, container type for purchasing and storing food, and cooking method. The questionnaire developed in this study could be applied to assess dietary factors during an exposure assessment of food-borne hazards in a large population. A validation study for the questionnaire is needed before applying it to surveys.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2005

To investigate whether there are estrogenic and anti-estrogenic activities in various medicinal herbs and discover prominent chemo-preventive agents, we screened and compared the ethanol extracts of 9 plants through the recombinant yeast assay and MCF-7 human breast cancer cell assay, In recombinant yeast assay, seven medicinal herbs showed estrogenicity, and four extracts showed androgenecity. In MCF-7 proliferation assay, the growth of MCF-7 cells was inhibited by eight extracts before and even after co-treatment with bisphenol A. It is interesting that the extracts of Glycyrrhiza uralensis, Cassia tora, Syringa velutina, Zingiber officinale, Malva verticillata, and Panax ginseng C.A. Meyer exhibited inhibitory effects as phytoestrogens in estrogen-responsive human breast cancer cells. This study suggests that some Korean medicinal herbs might be considered as phytoestrogens and be useful to further analyze those plants which contain the estrogenic effect in order to identify the active principles.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2012

In this study, we configured a system which ranks hazardous chemicals to determine their management priorities based on experts' opinions and the existing CRS (chemical ranking and scoring). Aggregate exposure of food, health functional food, oriental/herbal medicine and cosmetics have been taken into account to determine management priority. In this study, 25 hazardous chemicals were selected, such as cadmium, lead, mercury, and arsenic, etc. These 25 materials were ranked according to their 1) risk (exposure or hazard) indexes, 2) exposure source-based weight, and 3) public interests, which were also formed based on the existing priority ranking system. Cadmium was scored the highest (178.5) and bisphenol A the lowest (56.8). Ten materials -- cadmium, lead, mercury, arsenic, tar, acrylamide, benzopyrene, aluminium, benzene, and PAHs -- scored higher than 100. Eight materials -- aflatoxin, manganese, phthalate, chromium, nitrate/nitrite, ethylcarbamate, formaldehyde, and copper -- recorded scores in the range from 70 to 100. Also evaluated as potential risks were 7 materials; sulfur dioxide, ochratoxin, dioxins, PCBs, fumonisin, methyl mercury, and bisphenol A, and these materials were scored above 50. Then we compared risk index and correlation coefficient of total scores to confirm the validity of the total scores; we analyzed correlation coefficient of parameter and indicator. We discovered that the total score and weight, which has incorporated public interests, were high and statistically significant. In conclusion, the result of this study contributes to strengthening risk assessment and risk management of hazardous chemicals.