• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.98-103
• /
• 1992

The dynamic and static torque characteristics of a three dimensional control panel installed behind a guide panel were investigated in a wind tunnel. The panel was tested for various wind speeds, angles of attack and positions of the panel. The effects of the rotational speed and the amplitude of the sinusoidal motion were also studied. The increasing rate of torque coefficients with the angular position of the panel is small when the panel remains in the wake region, but is linear when it reaches the external stream. In case of a sinusoidal motion of the pannel, a hysterisis appears in the dynamic torque. The hysterisis becomes strong as the wind speed and the angular speed of the panel increase. The unsteady torque is considered quasi-steady when the angular speed is less than 5.5rad/s, i.e. the reduced frequency is less than 0.035.

• Composites Research
• /
• v.22 no.2
• /
• pp.30-36
• /
• 2009

In this paper, we propose the design method for the composite torque link of a landing gear for a helicopter. The composite torque link has to be light weighted and very stiff to keep the shock absorber in the landing gear of helicopter. The configuration and structural shape has to be designed in consideration of the RTM (Resin Transfer Molding) manufacturing process which is adopted to minimize the manufacturing cost. The mechanical properties are obtained through the coupon tests with the specimens made by the same manufacturing process for the composite structure. The optimal design process was performed through iterative modifications of the models which were verified by stress analysis using FEM. The composite torque link has lug-shaped parts and is very thick, so 3D Layered solid elements of ABAQUS were used to get the stress field including the stress components in thickness direction and non-linear static analysis using contact B.C. of rigid-deform condition was used to get the optimal design.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.129-135
• /
• 2021

Switched Reluctance Motor (SRM) has a characteristic that the inductance changes very nonlinearly depending on the magnitude of the current and the relative position of the rotor and stator, and the torque is generated In consideration of these problems, many studies have been conducted on a topology for driving that can improve efficiency and performance in an existing asymmetric bridge converter in order to simplify the circuit and economic efficiency. Therefore, in this paper, we want to check the performance by comparing and analyzing each converter used by applying it as a topology for SRM driving. The driving converters applied to the comparison and analysis are Conventional C-dump, Modified C-dump, Energy efficient C-dump, Resonant C-dump converter with C-dump converter type structure and the most widely used asymmetric bridge converter and 6-Switch inverter that used for general motors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.328-336
• /
• 1998

Marine reduction gears are usually used to increase the propulsion efficiency of propellers for ships powered by medium and small sized high speed diesel engines. Most of shaft systems adopt flexible couplings to absorb the transmitted vibratory torque from the engines to the reduction gears and to prevent the chattering phenomenon of reduction gears. However some elastic couplings show non-linear characteristics due to the variable torque transmitted from the main engines and the change of ambient temperature. In this study dynamic characteristics of flexible couplings sare investigated and their effects upon various vibratory conditions of propulsion systems are clarified. A calculation program of torsional vibration for the propulsion systems are clarified. A calculation program of Results of the program developed are compared with ones of the existing linear method and propulsion systems with the elastic couplings the transfer matrix method is adopted which is found to give satisfied results.

• ICROS
• /
• v.21 no.1
• /
• pp.31-36
• /
• 2015

운전자에게 편의성을 제공하는 차량의 주행관련 Advanced driver assist system (ADAS)에는 차량의 종방향과 횡방향 운동에 대한 제어기가 요구된다. 횡방향 제어를 위해서는 조향 시스템의 조향각 제어가 요구되는데 최근 구조적으로 간단하고 연비향상, 차량의 중량 감소, 빠른 응답성을 가지고 있는 전기적 파워 조향 (Electric power steering, EPS) 시스템이 자동차 산업에서 널리 사용되고 있다. 차량의 주행관련 ADAS를 사용하여 자율 주행 시 EPS 시스템은 상위 제어기에서 계산된 필요한 조향각을 추종 할 수 있도록 조향 핸들의 각 제어를 해야 한다. 그러나 일반적인 EPS 시스템은 운전자가 조향 핸들에 인가된 토크를 보조해 줄 수 있는 토크를 출력해 준다. 본 논문에서는 이러한 문제를 해결하는 방법들을 설명한다. 먼저 EPS 시스템의 기본 기능에 대해서 설명을 하고, 자율 추행 차량을 위한 조항 핸들의 각 제어를 위한 proportional-integral 제어, 슬라이딩 모드 제어 (Sliding mode control), 관측기 기반 비선형 댐핑 제어(Observer based nonlinear damping control) 등과 같은 다양한 기법의 제어 알고리즘들에 대한 방법들이 고찰되었다.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.102-104
• /
• 2009

매입형 영구자석 동기 전동기는 높은 효율과 빠른 동특성, 넓은 정출력 운전 영역 등의 장점 때문에 다양한 산업 분야에서 각광을 받고 있다. 특히 최대 효율 운전을 위해서 매입형 영구자석 동기기의 단위전류당 최대 토크(Maximum Torque Per Ampere, MTPA) 운전 방법에 대한 많은 연구들이 수행되어져 왔다. 이론적인 MTPA 운전점은 전동기의 제 정수에 의해 결정되는데, 매입형 영구자석 동기 전동기는 온도와 운전 영역에 따라 전동기제 정수의 변화가 극심하여 정확한 MTPA 운전을 하기 위해서는 전동기의 전 운전 영역에 대한 전동기 제정수를 미리 알고 있어야 한다. 실시간으로 전동기 제 정수를 추정하여 MTPA 운전점을 알아내는 방법도 제안되었으나 대부분 복잡한 비선형 방법이 적용되고 있다. 본 논문에서는 신호 주입 개념을 도입한 새로운 MTPA 운전 방법을 제안한다. 전류에 높은 주파수의 신호를 주입하여 그 주입된 신호에 의한 반응을 확인함으로 MTPA 운전점을 판별하게 된다. 이 방법은 전동기 제 정수 변동에 강인하며, 간단한 신호처리 과정만으로 MTPA 운전을 할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.887_888
• /
• 2009

In this paper, an advanced torque control scheme of Switched Reluctance Motor (SRM) using modified non-linear logical TSF (Torque Sharing Function) based on the DITC (direct instantaneous torque control) with PWM(Pulse Width Modulation). In the proposed control scheme, a simple calculation of PWM duty ratio, switching rules from DITC and non-linear torque sharing function can reduce the torque ripple with fixed switching frequency. The proposed control scheme is verified by the computer simulations and experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.543-551
• /
• 2001

This paper is concerned with optimization of a motor torque to drive Parking Sign system. It needs to minimize powers for stand alone operation and requires the optimized parameters in order to move the plates in the minimum torque. The operation can be represented as a complicated non-linear equation which is difficult to solve by general optimization techniques. In this paper, the dynamic equations of the system are derived, also the suitable Genetic Algorithm is designed to solve the equations. Computer simulation shows the availability of this method.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.10-18
• /
• 2006

We propose a new approach to compute possible acceleration boundary, so is called dynamic manipulability, for multiple robotic systems with frictional contacts between robot end-effectors and object. As the frictional contact condition which requires each contact force to lie within a friction cone is based on the nonlinear inequality formalism is not easy to handle the constraint in manipulability analysis. To include the frictional contact condition into the conventional manipulability analysis we approximate the friction cone to a pyramid which is described by linear inequality constraints. And then achievable acceleration boundaries of manipulated object are calculated conventional linear programming technique under constraints for torque capability of each robot and the approximated contact condition. With the proposed method we find some solution to which conventional approaches did not reach. Also, case studies are Presented to illustrate the correctness of the proposed approach for two robot systems of simple planar robots and PUMA560 robots.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.137-139
• /
• 2006

단 1차형 영구자석 선형 동기 전통기(PMLSM)는 디텐트력과 단부력에 의한 큰 토크 리플을 갖는 문제점이 있다. 본 논문에서는 영구자석 선형 통기 전동기의 디텐트력을 줄이기 위해 영구자석의 극수와 전기자의 슬롯수의 비를 변경한 새로운 구조의 단 1차형 영구자석 선형 동기 전동기를 제안하였으며, 단부력을 줄이기 위하며 고정자의 길이 조정 및 챔퍼링을 통하여 영구자석 선형 동기 전동기를 설계하였다.