• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.43-46
• /
• 2009

열탄성 부영역, 열탄점소성/손상 부영역, 공유면, 접촉 공유면에 기반을 둔 영역/경계 분할법을 적용하여 재료 비선형성을 갖는 열탄점소성 손상 문제와 경계 비선형성을 갖는 접촉 문제의 효율적인 해석을 제안하였다. 영역 및 경계 분할에 관련된 공유면 및 접촉 공유면에서의 연속 구속 조건을 처리하기 위하여 간단한 벌칙 함수 기법을 적용하였다. 결과적으로 재료 및 경계 비선형성은 소수의 부영역과 접촉 경계면에서 계산되는 유한요소 행렬들에 국한된다. 따라서 적절한 해석 알고리듬을 구성하면 대폭적인 효율성 향상이 가능하게 된다. 대변형과 같은 기하학적 비선형성은 고려하지 않았으며, 간단한 수치 실험을 통해서 열탄점소성 손상 및 접촉 해석의 효율성에 관련된 기본적인 특성을 분석하였다.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.179-190
• /
• 1998

A geometrically nonlinear finite element formulation of spatial cable networks is presented using two cable elements. Firstly, derivation procedures of tangent stiffness and mass matrices for the space truss element and the elastic catenary cable element are summarized. The load incremental method based on Newton-Raphson iteration method and the dynamic relaxation method are presented in order to determine the initial static state of cable nets subjected to self-weights and support motions. Furthermore, static non-linear analysis of cable structures under additional live loads are performed based on the initial configuration. Challenging example problems are presented and discussed in order to demonstrate the feasibility of the present finite element method and investigate static nonlinear behaviors of cable nets.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.385-393
• /
• 2005

This paper established the dynamic model of a flexible Timoshenko beam capable of geometrical nonlinearities subject to large overall motions by using the finite element method. Equations of motion are derived by using Hamilton principle and are formulated in terms of finite elements in which the nonlinear constraint equations are adjoined to the system using Lagrange multipliers. The Newmark direct integration method and the Newton-Raphson iteration are employed here for the numerical study which is to demonstrate the efficiency of the proposed formulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1427-1435
• /
• 2010

A mixed finite element model was developed using the classical plate theory to analyze the nonlinear bending of a plate. The appropriate weight functions for the constraints integrated over the domain were determined by the Lagrange multiplier method by using the principle of minimum virtual energy; which provides the constitutive relations between force-like variables and strains. All of detail terms of element wise coefficient matrices and associate tangent matrices to be used in the Newton iterative method are presented. Then, the linear solutions of the current model and those of the traditional displacement model under the SS (simple support) boundary conditions were compared with the existing analytical solution. The post-processed images of the nonlinear results of the force-like variables are presented to show the continuity of the solutions at the joint of the element boundaries. Finally, the converged nonlinear finite element solutions of the current model are compared with those of existing traditional displacement model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.655-662
• /
• 2011

For analyzing seismic performance of long-span bridge for multi-support excitation and preparing technically and efficiently for a variety of design demands, the new module on multiple excitation was built in a reliable non-linear analysis program(RCAHEST) by using Influence Line Method, and the study on structures was performed previously. Also, the result of the analysis through RCAHEST was compared and verified with commercial finite element analysis program SAP2000 by using the feature of Multi-Support Excitation. From these results, nonlinear time history analysis considering multi-support excitation was studied after designing FE model of Incheon cable-stayed bridge. It was proved that the maximum response of horizontal displacement decreased as the time delay was increasing at all nodes of bridge. And then the serviceability of analysis model was evaluated by performing ultimate analysis under changes in maximum acceleration of seismic load data.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.166-171
• /
• 1998

본 논문에서는 고체구조물의 비선형변형해석에 대하여 일반이론으로 개발된 수치해법을 단순 고체 구조물인 일차원 봉 문제에 적용하여 그 변형해석을 수행 하였다. 정확한 해를 구하기 위하여 증분 뉴톤-랩슨방법이 수정 보완 사용되었다. 또한 개발된 비선형유한요소법의 검증을 위하여 수학적인 정해가 존재하는 균일한 체력이 작용하는 단순봉의 변형을 해석하여 그 결과를 수학적인 정해와 비교하였다. 비교 결과 본 논문을 통하여 개발된 비선형 유한요소법의 정확성이 입증되었다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.100-107
• /
• 2018

The material and geometrical nonlinear finite elment analysis of UHPFRC 50M composite box girder was carried out. Constitute law in tension and compressive region of UHPFRC and HPC were modeled based on specimen test. The accuracy of nonlinear FEM analysis was verified by the experimental result of UHPFRC 50M composite girder. The UHPFRC 50M segmental composite box girder which has 1.5% steel fiber of volume fraction, 135MPa compressive strength and 18MPa tensile strength was tested. The post-tensioned UHPFRC composite girder consisted of three segment UHPFRC U-girder and High Strength Concrete reinforced slab. The parts of UHPFRC girder were modeled by 8nodes hexahedron elements and reinforcement bars and tendons were built by 2nodes linear elements by Midas FEA software. The constitutive laws of concrete materials were selected Multi-linear model both of tension and compression function under total strain crack model, which was included in classifying of smeared crack model. The nonlinearity of reinforcement elements and tendon was simulated by Von Mises criteria. The nonlinear static analysis was applied by incremental-iteration method with convergence criteria of Newton-Raphson. The validation of numerical analysis was verified by comparison with experimental result and numerical analysis result of load-deflection response, neutral axis coordinate change, and cracking pattern of girder. The load-deflection response was fitted very well with comparison to the experimental result. The finite element analysis is seen to satisfactorily predict flexural behavioral responses of post-tensioned, reinforced UHPFRC composite box girder.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.175-184
• /
• 2006

Two methods of the nonlinear static pushover analysis have been presented for the performance-based seismic design and evaluation of MDOF continuous bridges. Guidelines for buildings presented in FEMA-273 applying the Displacement Coefficient Method (DCM) and in ATC applying the Capacity Spectrum Method(CSM) have been modified for MDOF bridges. Two methods are compared with the time- history analysis. The lateral load distribution pattern for seismic loads has been examined in the static pushover analysis. The force-based fiber frame finite element has been implemented in the modeling of reinforced concrete piers.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.70-72
• /
• 1999

일반적으로 비선형 정자계 문제를 해석하기 위해서 뉴튼-�N슨(Newton -Raphson : NR)법이 이용된다. 하지만 뉴튼-�N슨법의 경우 각 반복계산 때마다 새로운 선형 시스템의 해를 구하기 위해서 LU-decomposition과 같은 과정을 매 반복계산 때마다 시행해야 하므로 절점(node)의 수가 증가할 경우 계산시간이 증가한다는 단점이 있다. 이러한 단점을 보완하기 위해서 최근 TLM (Transmission Line Modeling)법이 새로운 반복계산법으로 비선형 유한 요소 해석에 적용되었으며 뉴튼-�N슨법에 비해 훨씬 우수한 특성을 보여주었다. 하지만 지금까지의 TLM법은 2차원의 정식화만 이루어졌고 3차원에는 적용되지 못한 것이 사실이다. 본 논문에서는 3차원의 비선형 정자계 문제에 TLM법을 적용할 수 있는 수식을 최초로 제안하며 3차원 코어(core)모델에 대해 TLM법을 적용하여 그 타당성을 검증하기로 한다. 또한 3차원 비선형 TLM법을 이용한 해석 결과가 뉴튼-�N슨법에 의한 결과와 완전히 일치하며 수렴 속도에 있어서도 훨씬 향상된 결과를 나타냄을 보이도록 하겠다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.93-103
• /
• 1994

Two beam/column elements are developed in order to analyze the geometric nonlinear plane irames including the effects of internal hinge and transverse shear deformation. In the case of the first element (finite segment method), tangent stiffness matrix is derived by directly integrating the equilibrium equations whereas in the case of the second element (finite element method) elastic and goemetric stiffness matrices are calculated by using the hermitian polynomials including the effects of internal hinge and shear deformation as the shape function. Numerical results are presented for the selected test problems which demonstrate that both elements represent reliable and highly accurate tools.