• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.376-380
• /
• 2004

측벽이 존재하는 개수로 난류흐름에 대한 DNS 자료를 이용하여 난류의 비등방성을 해석하였다. 측벽의 2등분선(sidewall bisector)에서 난류강도의 분포를 통해 바닥과 자유수면에서의 비등방성을 분석하고, AIM을 도입하여 흐름장 전반에 걸쳐 세부적인 비등방성 해석을 수행하였다. 측벽의 2등분선에서의 난류강도의 분포를 통해 바닥과 자유수면 근처에서 난류강도가 강한 비등방성을 갖는 것을 볼 수 있었다. 또한 3개의 다른 영역에서 AIM의 도입을 통해 측벽이나 바닥근처에서는 난류의 비등방성이 구형 관수로 흐름과 유사한 것으로 나타났으나, 개수로 난류흐름의 주된 특성이 velocity-dip phenomena가 존재하는 영역에서는 구형 관수로 흐름과는 달리 천이영역이 존재한다는 것을 알 수 있었다.

• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.871-883
• /
• 2005

This paper investigates the impacts of turbulent anisotropy on the mean flow and turbulence structures in vegetated open-channel flows. The Reynolds stress model, which is an anisotropic turbulence model, is used for the turbulence closure. Plain open-channel flows and vegetated flows with emergent and submerged plants are simulated. Computed profiles of the mean velocity and turbulence structures are compared with measured data available in the literature. Comparisons are also made with the predictions by the k-$\epsilon$ model and by the algebraic stress model. For plain open-channel flows and open-channel flows with emergent vegetation, the mean velocity and Reynolds stress profiles by isotropic and anisotropic turbulence models were hardly distinguished and they agreed well with measured data. This means that the mean flow and Reynolds stress is hardly affected by anisotropy of turbulence. However, anisotropy of turbulence due to the damping effect near the bottom and free surface is successfully simulated only by the Reynolds stress model. In open-channel flows with submerged vegetation, anisotropy of turbulence is strengthenednear the vegetation height. The Reynolds stress model predicts the mean velocity and turbulence intensity better than the algebraic stress model or the k-$\epsilon$ model. However, above the vegetation height, the k-$\epsilon$ model overestimates the mean velocity and underestimates turbulence intensity Sediment transport capacity of vegetated open-channel flows is also investigated by using the computed profiles. It is shown that the isotropic turbulence model underestimates seriously suspended load.

• Nuclear Engineering and Technology
• /
• v.20 no.1
• /
• pp.35-46
• /
• 1988

The prediction of clad surface temperatures is important to the design and the safety anlaysis of nuclear reactor. The accurate prediction requires the detailed knowledge of the flow structure and heat transfer, which is complicate due to anisotropic turbulent phenomena. A two-equation model including anisotropic eddy viscosity model is applied to forecast the velocity distribution. And the temperature field is calculated with uniform wall heat flux. The Galerkin's weighted residual finite element method has been used to calculate the turbulent quantities right up to the wall. The numerical results show good agreement with available data and that turbulence anisotropy strongly affects on the mean flow and thus the temperature field. And Nu-P/D correlation is established for sodium coolant in close-packed equilateral triangular bundle in the P/D range of 1.05 to 1.30.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.77-84
• /
• 2003

It is an aim of this study to perform extensive numerical study for analyzing the anisotropic turbulence effects on spatial and temporal behaviors of diesel sprays after wall impingement. The turbulence model of Durbin is used for comparisons with the $k-\varepsilon$ model. The turbulence-induced dispersions of droplets are considered to describe the anisotropy of turbulence effectively and the spray/wall interactions are simulated using the model of Lee and Ryou. The present study investigates the internal structures of impinging diesel sprays such as Sauter mean diameter (SMD), loca1 droplet velocities, and local gas velocities and also compares the results predicted by two turbulence models with the experimental data. The Durbin's model considering the anisotropy of turbulence predicts both gas and droplet tangential velocities better than the$k-\varepsilon$ model does. It is concluded that the anisotropy of turbulence should be considered in simulating impinging diesel sprays.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.93-93
• /
• 2019

식생이 있는 개수로 흐름의 분석이 중요한 이유는 식생이 흐름 특성과 유사이송 및 하상변동에 영향을 주어 복잡한 흐름 현상을 만들어 내기 때문이다. 식생 밀도, 식생 길이, 식생이 식재된 형태에 따라 흐름의 현상이 달라지며, 흐름 특성의 변화로 인해 하상 및 주변 하천구조물에 영향을 줄 수 있다. 하천의 식생은 대부분 폭과 길이가 제한된 모습으로 존재하는 경우가 많으며, 식생이 존재하는 영역에서는 식생항력에 의해 유속이 감소하고 식생이 없는 영역에서 유속이 증가한다. 식생항력에 의해 변화된 흐름 특성은 일정 거리를 지나면 평형상태에 도달하게 되며, 식생의 경계면에서는 전단층이 발달하여 모멘텀의 교환이 활발하게 발생하는 현상을 보인다. 식생 흐름의 특성을 분석하기 위해 수치모형으로는 식생 흐름의 강한 비등방성을 모의할 수 있는 비등방성 수치모형이 적합하다. 본 연구에서는 부분 식생이 식재된 개수로에서 RSM (Reynolds stress model)을 이용하여 식생과 식생 주변의 흐름 특성 및 난류량을 분석하였다. 흐름의 변화에 따라 크게 3 구간으로 나누어 흐름 특성을 파악할 수 있으며, 식생의 밀도와 식생 영역의 폭의 길이에 따라 각 구간의 길이가 달라지는 것을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.179-189
• /
• 2010

This paper presents a numerical investigation of vorticity generation in fully vegetated open-channel flows. The Reynolds stress model is used for the turbulence closure. Open-channel flows with rough bed-smooth sidewalls and smooth bed-rough sidewalls are simulated. The computed vectors show that in channel flows with rough bed and rough sidewalls, the free-surface secondary currents become relatively smaller and larger, respectively, compared with that of plain channel flows. Also, open-channel flows over vegetation are simulated. The computed bottom vortex occupies the entire water depth, while the free-surface vortex is reduced. The contours of turbulent anisotropy and Reynolds stress are presented with different density of vegetation. The budget analysis of vorticity equation is carried out to investigate the generation mechanism of secondary currents. The results of the budget analysis show that in plain open-channel flow, the production by anisotropy is important in the vicinity of the wall and free-surface boundaries, and the production by Reynolds stress is important in the region away from the boundaries. However, this rule is not effective in vegetated channel flows. Also, in plain channel flows, the vorticity is generated mainly in the vicinity of the free-surface and the bottom, while in vegetated channel flows, the regions of the bottom and vegetation height are important to generate the vorticity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.545-549
• /
• 2009

본 연구에서는 주흐름방향으로 식생 영역이 교차적으로 존재하는 개수로 흐름에 대한 3차원 수치 모의를 수행하였다. 지배방정식의 난류 폐합을 위해 $k-{\varepsilon}$ 난류모형을 이용하였다. 먼저, 하상의 일부만 식재된 부분 식생 수로를 수치모의 하고 기존의 실험 결과와 비교하였다. 그 결과 본 모형이 평균유속 분포를 매우 잘 예측하는 것으로 나타났으나, 레이놀즈응력 분포는 실험 결과에 비해 비식생영역에서는 다소 과소 산정하고 식생영역에서는 과대 산정하는 것으로 나타났다. 이는 본 모형이 등방성 모형이기 때문에 식생 경계부에서 발생되는 난류의 비등방성 효과를 정확히 예측 할 수 없기 때문인 것으로 판단된다. 또한 주흐름방향으로 식생 영역이 교차적으로 존재하는 대응 식생 수로를 수치모의하고, 계산 결과를 기존의 실험 결과와 비교하였다. 그 결과 본 모형이 대응 식생 수로에서의 유속 분포를 매우 잘 예측하는 것으로 나타났다. 또한 식생 밀도가 증가함에 따라 식생이 흐름 방향을 변화시켜 점차 만곡수로와 유사한 형태의 흐름이 형성되는 것으로 나타났다.

• Ecology and Resilient Infrastructure
• /
• v.4 no.1
• /
• pp.54-62
• /
• 2017

This study investigated compound open channel flow using OpenFOAM Large Eddy Simulation (LES). Large eddy simulations were carried out by solving the filtered continuity and momentum equations numerically. One equation LES and non-uniform grid were applied to capture the anisotropic turbulence and secondary flow near the wall. The results of large eddy simulations of turbulent flow in a compound open channel with deep and shallow flood plain depths are presented. These LESs are validated with experimental data, resulting in a good agreement between measured and calculated data. The role of anisotropic turbulence in generating secondary currents is illustrated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1150-1157
• /
• 2003

Nonlinear relationship between Reynolds stresses and the rate of strain of nonlinear k-$\varepsilon$models is evaluated theoretically by using the boundary layer assumptions against the turbulence-driven secondary flows in noncircular ducts and then their prediction performance is validated numerically through the application to the fully developed turbulent flow in a square duct. Typical predicted quantities such as mean axial and secondary velocities, turbulent kinetic energy and Reynolds stresses are compared with available experimental data. The nonlinear k-$\varepsilon$ model adopted in a commercial code is found to be unable to predict accurately duct flows with the prediction level of secondary flows one order less than that of the experiment.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.57-63
• /
• 2003

Two nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a square duct. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and Reynolds stresses are compared in details both qualitatively and quantitatively with each other. A nonlinear κ-ε model with the wall function method capable of predicting accurately duct flows involving turbulence-driven secondary motion is presented in the present paper. The nonlinear κ-ε model of Shih et al.[1] adopted in a commercial code is found to be unable to predict accurately duct flows with the prediction level of secondary flows one order less than that of the experiment.