• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.806-809
• /
• 2003

In this paper, extracting design information from arbitrary aspherical lens shape in reverse engineering is introduced. Deformation terms and sphere data equation with various variables compose asphere equation. Aspherical lens shape is expressed with complicated polynomial expression that includes deformation terms and sphere data. Deformation term and vertex curvature have direct influence on a geometric shape and an optical characteristics of aspherical lens. Hence, extracting these information mean that design information could be derived and analyzed from shape data of arbitrary aspherical lens. Furthermore, sharing designer's experience and knowledge for aspherical lens design could be expected.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.144-149
• /
• 2005

This study presents the method of extracting shape design data on any aspheric lens by reverse engineering. The design formula fur aspheric lenses is needed in almost all of the design, manufacture and measuring processes. The difficulty in designing the lens lies in the fact that it uses a complex formula for the aspheric surface, and many of the preliminary design values must be selected before actually inserting them into the formula. If the values could be extracted from an aspheric lens for which the structural design information is unknown and used in designing other lenses of similar characteristics, the difficulties in designing and measuring aspheric lens could be reduced. Therefore, in this study, the concept of reverse engineering was applied to demonstrate the method of extracting shape design information of aspheric lens from an arbitrary aspheric lens.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.73.3-74
• /
• 2016

본 연구에서는 비구면 반사경의 형상오차를 3가지 방법으로 측정, 비교하였다. 실험에 사용한 포물면 반사경의 구경은 108 mm, 유효초점거리는 444.5 mm 이다. 첫 번째로 접촉식 형상측정방식인 FTS(Form TalySurf)를 이용하여 표면 거칠기와 반사경의 최적 곡률 반경(BestFitt Radius) 값을 측정하였다. 두 번째로는 비접촉식 형상측정방식인 UA3P(Ultrahigh Accurate 3-D Profilometer)를 이용하여 반사경의 형상 정밀도를 측정하였다. UA3P를 이용할 경우 반사경의 전체 형상을 측정할 수 있다. 세번째로 Shark-Hartmann 센서를 이용한 광학측정방법으로 반사경의 형상 정밀도를 측정하였다. 측정에 필요한 레이저 광학계는 레이저, 콜리메이터, 핀홀, 카메라 렌즈 및 비구면 광학계를 이용하여 설계하였다. 본 연구에서 도출한 각 측정 방법의 신뢰도를 바탕으로 간섭계 사용에 제약이 있는 자유형상곡면의 반사경 표면의 형상오차 측정에 적용할 계획이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.191-198
• /
• 2003

In this study, aberration free aspherical lens design method named ray reverse tracing method is introduced. Differently from the traditional design method, the ray reverse tracing method traces the shape and location of a real object by use of its virtual image. From the result, especially spherical aberration free aspherical lens could be designed by use of the ray reverse tracing method. Furthermore, it could reduce the degree of dependence of optical characteristics on designer's ability, because deformation terms and optimization can be eliminated, which has been performed in conventional lens design process.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.83-88
• /
• 2008

Purpose: To design an anamorphic aspherical prism lens for the HMD optical system. Methods: First, we get the initial data, needed in design, which are distances between each surface etc., by analyzing user's demended specifications and by drawing geometrically the shape of prism lens by using CAD. Based on these data and using 'ode V' which is an optical design software, we could progress the optimization in which we treat the coefficients of the anamorphic aspherical surface as the principal variables. To reduce the cost in DTM manufacturing, we would optimize the optical system with the transmitting surface, existed in the direction of video device among 3 surfaces of the prism lens, remaining as a plane. Results: we could design one anamorphic aspherical prism lens which has the finite ray aberration of 15 ${\mu}m$, the distortion of 0.5%, and the MTF value of 0.3 over at 36 lp/mm for the video device of 12 mm ${\times}$ 9 mm size. Conclusions: We designed a prism lens used for HMD. This prism lens has the optical capacities of 15 ${\mu}m$ finite ray aberration and 0.5% distortion for the video device of 12 mm ${\times}$ 9 mm size, and become the optical system having the MTF value of 0.3 over at 36 lp/mm.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.123-133
• /
• 2011

Purpose: The present study was conducted to analyze any difference in the movement of aspheric RGP lens by the amounts of keratometiric astigmatisms using keratometer and corneal topography. Methods: Corneal curvatures in thirty six eyes of males and females of with-the-rule keratometric astigmatisms in their twenties were measured by a keratometer and worn aspheric RGP lenses. Then, lens rotations, vertical and horizontal movements of lens by blinking were measured to compare with lens movements when aspheric RGP lenses were fitted by total keratometric astigmatisms using corneal topography. Results: The case having higher amount of central keratometric astigmatism was 61.1% of subjects, however, 36.1% of subjects showed higher total keratometric astigmatism indicating that central keratometric astigmatism was not always bigger than total keratometric astigmatism. Since over 0.25 diopter difference between total and central keratometric astigmatisms was shown in 19 eyes (52.8% of subjects), the prescription for lens fitting could be changed. Significant difference in horizontal movement was detected with increase of astigmatism when it compared based on the amount of keratometric astigmatism measured by a keratometer. However, there was no significant difference in lens rotation, horizontal and vertical movements by comparison with the amount of total keratometric astigmatism using a corneal topography. When central keratometric astigmatism measured by keratometer was bigger than total keratometric astigmatism estimated by corneal topography, bigger lens rotation was shown compared with opposite case. Also, the tendency of bigger lens rotation was measured with the increase of keratomatric astigmatism in the case of same prescription having same base curves with same amount of keratometric astigmatism but different curvatures. Conclusions: From the present study, we concluded that lens movements on cornea were not totally different when aspheric RGP lens fitted on with-the-rule astigmatism by keratometer and corneal topography. However, there was some difference in certain lens movements. Therefore, we concluded that further study on the relationship between the prescriptions for lens fitting should be conducted for improving the rate of successful lens fitting by keratometer or for the proper application of corneal topography for lens fitting.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.197-198
• /
• 2006

본 연구에서 개발하는 성형렌즈는 그림1과 같이 한쪽 면이 비구면인 평볼록 형상이다. Glass렌즈의 고온압축성형을 위해서는 초정밀 가공기술로 제작된 성형Mold가 필요하며, Mold재질에 따른 성형기술의 확립이 필수적이다. 또한, 성형Mold의 표면과 융착반응이 없는 Glass소재가 요구된다. 본 실험을 위한 성형Mold는 코발트(Co) 함량 0.5 %의 초경합금(WC; 일본, Everloy社, 002K)을 초정밀 연삭가공하여 제작하였다. Glass소재는 전이점(Transformation Point; Tg) $572\;^{\circ}C$,항복점(Yielding Point; At) $630\;^{\circ}C$의 열적 특성을 갖는 K-BK7(일본, Sumita社)을 사용하였으며, d선에서 굴절률 및 아베수는 각각 1.51633, 64.1이다. 비구면 Glass렌즈 성형은 GMP(Glass Molding Press; 일본, Sumitomo社, Nano Press-S)장비를 사용하여 성형온도 $625\;^{\circ}C$, 서냉온도 $550\;^{\circ}C$로 고정하고 성형압력를 200-800 N 범위에서 변화시켰다. 표 1에 성형변수로 사용한 서냉속도와 서냉전환온도 조건을 나타낸다. 표1과 같이 각 서냉조건별로5장의 렌즈를 성형 후 특성값이 평균치에 가까운 3장을 선별하여 그 특성을 비교하였다. 각 조건에 따른 성형렌즈의 형상정도(일본, Panasonic社, UA3P, 자유곡면형상측정기), 두께(일본, Mitutoyo社, MDC-25M, 마이크로메터), 굴절률(일본, Shimatus社, KPR-200, 정밀굴절률측정기) 및 MTF[해상도](독일, Trioptics社, Image Master HR, MTF-Field)를 측정하여 각각의 광학적 특성을 비교 평가하였다. 비구면 Glass렌즈 성형장비와 형상측정기를 그림 2, 3에 각각 나타낸다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.53-57
• /
• 2004

In this paper, we will present the Aspheric Surface Program for optical element. X-ray optical element designed to give a high resolution and reflectively in order to observe the living cell in the range of the water window. According to optical design, we developed the Aspheric Surface Program using the visual basic. Using the Aspheric Surface Program, we directly machined the electroless nickel bulk.

• The Optical Journal
• /
• s.121
• /
• pp.36-37
• /
• 2009

비구면 유리렌즈는 고성능, 고신뢰성과 더불어 기존 렌즈들의 한계였던 수차 및 선명도를 개선하고 고온고습에 강한 장점을 갖고 있다. 디지털카메라, 폰카메라, 정보저장기기, 스캐너, 프로젝터 등 고성능 고신뢰성을 요구하는 동시에 소형화 추세가 급속히 진행되는 디지털 이미징 시스템의 핵심부품으로 사용되고 있으며 다양한 응용분야에 활용될 전망이다. 본 고는 지난 3월 13일 창원컨벤션센터에서 (주)대호테크 주최로 열린 경남지역산업 중점기술개발사업 워크숍에서 초청강연을 한 재영솔루텍(주) 김동식 상무(나노광학사업부장)의 강연 내용을 요약 정리한 것으로 글로 기술하는 과정에서 다소 매끄럽지 못한 내용이 있을 수 있음을 밝혀둔다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.197-197
• /
• 2004

일반적으로 가공기는 주로 직선 운동 축과 회전 운동 축으로 구성되어 있으며, 여러 개의 축의 조합에 의하여 원하는 경로를 얻어내게 된다 여러 축이 조합이 되더라도 대부분 가공 동작의 경우는 하나의 축에 의한 단축 운동으로 충분히 만족할 만한 결과를 얻을 수 있다. 그러나, 금형 가공이나 렌즈가공 등은 단순한 회전이나 직선의 조합에 의한 곡선이 아닌 임의의 함수에 의한 곡선이므로 이러한 경우 2축 이상을 적절히 이동시켜서 원하는 형상을 얻어야 한다.(중략)