• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1045-1050
• /
• 2008

A GNSS augmentation system provides precision information using corrected GNSS pseudorange measurements. Common bias errors are corrected by PRC (Pseudorange Correction) between reference stations and a rover. However non-common errors (ionospheric and tropospheric noise error) are not corrected. Using position error variance this paper analyzes non-common error (noise errors) of ionosphere and troposphere wet vapor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.197-200
• /
• 2008

A GNSS augmentation system provides precise position information using corrected GNSS pseudorange measurements. Common bias errors are corrected by PRC (Pseudorange Correction) between reference stations and a rover. However non-common errors (Ionospheric and Tropospheric noise error) are not corrected. Using position error variance this paper analyzes non-common errors (noise errors) of ionosphere and troposphere wet vapor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1405-1410
• /
• 2015

In this study we designed the radiation-hardened sensor signal processing modules that can be commonly used for a variety of sensors during normal operation and even in high-radiation environments caused by an accident. First development module was designed to receive the change of the R and C value from the sensors and to process the signal as a PWM modulation scheme. This module was assessed to have ± 10% error to the Full-Scale in the radiation test in the range of 12 kGy TID. The main cause of the error was analyzed as the annealing of the common circuit in the switching element and the consequent increase in the duty ratio of the pulse width modulation circuit according to the radiation dose increasement. The redesigned module for higher radiation resistivity with Stub transistor circuit was found to have less than 5% error to the Full-scale from the radiation test results for 20.7 kGy TID range.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.98-99
• /
• 2007

It is necessary to use satellite radio navigation system as well as satellite radio navigation augmentation system such as differential Global Positioning System to achieve the positioning accuracy and reliability requested by International Maritime Organization in port and coastal area. Especially, position accuracy of DGPS user is effected by accuracy of pseudorange correction broadcasted from DGPS reference station. This paper shows pseudorange correction calculation algorithm adopting a non-common error estimation filter in order to improve accuracy of pseudorange correction. Finally, this paper verifies that the pseudorange correction calculated by adopting a non-common error estimation filter satisfies performance specifications of RTCM.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.129-141
• /
• 2023

This study analyzes the dynamic characteristics of daily freight rates of dry bulk and tanker shipping markets and their forecasting accuracy by using the error correction models. In order to calculate the error terms from the co-integrated time series, this study uses the common stochastic trend model (CSTM model) and vector error correction model (VECM model). First, the error correction model using the error term from the CSTM model yields more appropriate results of adjustment speed coefficient than one using the error term from the VECM model. Furthermore, according to the adjusted determination coefficients (adjR²), the error correction model of CSTM-model error term shows more model fitness than that of VECM-model error term. Second, according to the criteria of mean absolute error (MAE) and mean absolute scaled error (MASE) which measure the forecasting accuracy, the results show that the error correction model with CSTM-model error term produces more accurate forecasts than that of VECM-model error term in the 12 cases among the total 15 cases. This study proposes the analysis and forecast tasks 1) using both of the CSTM-model and VECM-model error terms at the same time and 2) incorporating additional data of commodity and energy markets, and 3) differentiating the adjustment speed coefficients based the sign of the error term as the future research topics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.433-442
• /
• 2010

In this paper, self-calibration algorithm based on covariance matrix is proposed for compensating amplitude/phase mismatch in multi-baseline interferometer direction finding system. The proposed method is a solution to nonlinear constrained minimization problem which dramatically calibrate mismatch error using space sector concept with cost function as defined in this paper. This method, however, has a drawback that requires an estimated initial angle to determine the proper space sector. It is well known that this type of drawback is common in nonlinear optimization problem. Superior calibration capabilities achieved with this approach are illustrated by simulation experiments in comparison with interferometer algorithm for a varitiety of amplitude/phase mismatch error. Furthermore, this approach has been found to provide an exceptional calibration capabilities even in case amplitude and phase mismatch are more than 30 dB and over $5^{\circ}$, respectively, with sector spacing of less than $50^{\circ}$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.613-623
• /
• 2007

The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.2
• /
• pp.349-356
• /
• 2009

In this study, we suggest the estimation method of the relative risk for the unemployment statistics of a small area such as si, gun, gu in Korea. The considered method are the usual pooled estimator, weighted estimator with the inverse of log-variance as weights, and the Jackknife estimator. And we compare with the efficiency of the three estimators by estimating the bias and mean square errors using real data from the 2002 Economically Active Population Survey of Gyeonggi-do. We compute the unemployed rate of male and female in small areas, and then estimate the common relative risk for the unemployed rate between male and female. Also, the stability and reliability of the three estimators for the common relative risk was evaluated using the RB(relative bias) and the RRMSE(relative root mean square error) of these estimators. Finally, the Jackknife estimator turned out to be much more efficient than the other estimators.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1846-1855
• /
• 2015

In this paper, a precise relative positioning with TD(time differenced) carrier phase measurements from a low-cost GNSS(Global Navigation Satellite System) receiver is proposed and analysed. The proposed method is using carrier phase measurement from a single GNSS receiver that reference receiver is not required and stand alone positioning is possible. TD operation removes the troublesome integer ambiguity resolution problem, and if the time interval is short, other error, such as, ionospheric, tropospheric delay and ephemeris error are effectively eliminated. The error analysis of the proposed method shows that a precise and positioning with carrier phase is possible. The implemented system is evaluated using a real car experiments. The results show that the horizontal positioning error was less than 3m during 10 minutes experiments, which is 4 times more precise than the results of normal code based absolute positioning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.279-283
• /
• 2012

유역 유출 연속모의 모형은 수자원 계획과 효율적인 물 관리 정책 수립에 중요한 도구가 된다. 유역 유출 연속모의 모형에는 다수의 매개변수가 있으며, 이러한 매개변수는 모형 보정을 통해 추정된다. 연구에서 사용한 모형은 SWMM이며 집합체 혼합 진화 알고리즘으로 자동 보정하였다. 자동 보정에 사용되는 최적화 알고리즘은 목적함수에 따라 상이한 결과를 도출하기도 한다. 이에 따라 본 연구에서는 유역 유출 모형의 자동보정에 적합한 목적함수를 선정하기 위하여 4개의 목적함수를 구성하였고, 밀양댐 유역에 적용하였다. 그리고 목적함수에 따른 자동 보정의 결과를 평가하기 위해 5가지의 평가지표를 활용하였다. 보정의 결과, 모든 목적함수에서 공통적으로 첨두유량의 오차는 다소 크게 발생하였다. 그리고 잔차 절대값의 합이 최소가 되도록 구성한 목적함수가 다른 목적함수에 비해 상대적으로 양호한 결과를 도출하였지만, 목적함수에 따른 큰 차이는 없었다. 또한, 유역 유출 연속모의에서는 유역의 물수지가 중요한 요소이므로 향후, 보다 정확도 높은 유역 유출 연속모의 모형의 자동 보정을 위해서는 첨두유량과 물수지와 관련된 오차를 제어할 수 있는 추가적인 기법이 요구된다.