• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2062-2065
• /
• 1997

컨버터나 인버터의 운전에 있어서 비간섭 전류제어는 그 시스템의 성능에 직접적으로 영향을 주는 중요한 요인이다. 하지만 일반적인 비간섭 제어방식은 모터나 입력 인덕터에 파리미터 오차가 있으면 잘 동작하지 않는다 이 논문에서는 PI 형태의 새로운 비간섭제어 방식을 제안하였다. 이 방식의 가장 큰 장점은 파라미터 오차에 대해 강인성을 가지는 것이다. 시뮬레이션을 통하여 제안된 제어기의 성능을 살펴보았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.805-815
• /
• 1992

In this paper, robust decoupling control scheme of miftivarlable systems Is studied. Design methods for Input-Output decoupling systems with robustness against signal failure In arbitrary feedback loop or actuator loop Is suggested based on the Riccati type matrix equation and state feedback, and is simulated In Turbo-Generator systems with B-Input, 2 output. The results of simulation represents the decoupled and stable response against the failure of signal In sensor or actuator loop. However, the system designed by conventional ,it ate feedback shows the unstable response. This method Is applied for robust decoupling control of the complicated multivariable systems.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.81-87
• /
• 2006

This paper deals with an empirical model for decoupling control to control the refrigeration system effectively. The conventional control schemes of the system are mainly focused on representative two control methods, superheat control and capacity control. The capacity control is basically conducted to respond partial loading conditions on the purpose of energy saving. The superheat control is mainly carried out to maintain maximum coefficient of performance (COP). In the variable speed refrigeration system, the capacity and the superheat are controlled by inverters and electronic expansion valves respectively for saving energy and improving cost performance. The capacity and superheat can not be controlled independently because of interfering loop when the compressor speed and opening angle electronic expansion valve is varied. Therefore, we suggest decoupling model to eliminate the interfering loop at first. Next, each transfer function in decoupling control model is obtained from number of experiments.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.2
• /
• pp.43-50
• /
• 1992

In this paper, application of decoupling control method of multivariable system by state feedback to turbo-generating system with 2-input and 2-output is studied. The results of simulation shows tat turbo-generating system is canonically decoupled, and can be controlled against the change of load or frequency by feedback gain.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.99-103
• /
• 1998

We propose a nonlinear feedback controller that can control the induction motors which have been applied to many electrical facilities with high dynamic performance by means of decoupling of moor speed and rotor flux. The nonlinear feedback controller needs the information on some motor parameters. Among them, rotor resistance varies greatly with machine temperature. Anew recursive adaptation algorithm for rotor resistance which can e applied to our nonlinear feedback controller is also presented in this paper. To demonstrate the practical significance of our results, we present some experimental results.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.425-426
• /
• 2015

본 논문에서는 실시간 시뮬레이터를 이용하여 1MW PCS(Power Conditioning System)의 불평형 비간섭 전류제어(Unbalanced Current Control under Unbalanced Condition) 알고리즘을 검증하였다. 3상 불평형 발생 시, 기존의 전류제어는 전압의 불안정으로 인해 전류의 목표 값이 흔들리는 현상을 보인다. 하지만, 3상 불평형 비간섭 제어는 불평형 상황 전압과 전류를 정상과 역상 성분으로 나누고, 이를 독립적으로 제어함으로써 더욱 우수한 성능을 가진다. 본 논문은 1MW PCS의 HILS(Hardware-In-the-Loop Simulation) 환경을 구축하여 실시간 시뮬레이터에서 실제 출력되는 전류의 불평형을 확인하고, 이를 개선하는 것을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.114-122
• /
• 1995

A digital preview controller is designed for tandem cold mills to achieve a more improvement of the thickness accuracy. Simultaneously a blocked noninteracting controller is synthesized for rejecting the interactive effects among adjacent stands and for controlling independently each roll stand of tandem cold mills. The performance effects and characteristics of the suggested roll contol system are discussed in the practical viewpoint. The simulaltion results show that the thickness accuracy of tandem cold mills can be largely improved by the blocked noninteracting and digital preview controller.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2629-2639
• /
• 1994

A robust multivariable controller is synthesized for tandem cold mills. A blocked-noninteracting control method is applied for simplifying the structure of rolling control systems. And, a loop-shaping LQ control method is applied for maintaining the variation of the thickness and tension of each rolling stand as small as possible. In this paper, the effects of the design parameter on loop-shaping and the number of control inputs are evaluated. The simulation results show that the thickness and tension control accuracy of tandem cold mills can be improved by the blocked-noninteracting and compensated loop-shaping LQ controller.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.372-374
• /
• 1999

AC 전동기는 전기각 주파수에 비례하는 간섭항을 가지고 있어 d-q축의 전류응답이 서로 간섭을 일으키게 된다. 이런 간섭현상은 특히 고속운전에서 크게 나타나며, 이로 인해서 토오크 응답이 영향을 받게 되어 고성능을 요하는 적용 범위에서는 문제가 될 수 있다. 이를 해결하기 위해서 지금까지 몇 가지 방법이 제안되어 왔다. 본 논문에서는 이러한 방법들에 대해서 비간섭 제어 성능을 비교하고 파라미터 변화에 따른 영향을 분석한다. 분석된 결과는 실험을 통해서 얻어진 결과와 일치함이 보여진다.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.84-88
• /
• 1999

In this paper, systems described by state-space models are considered. For these systems, author studies the decoupling of linear systems and gives a sufficient condition for a system to be made feedback decouplable. Especially, the condition is given by LMI(Linear Matrix Inequality) form. Based on this condition, it is guaranteed that the system decoupling problem is achieved and the $H_{\infty}$ constraint is satisfied simultaneously. This result can be easily extended to the robust decoupling control system design problems.