• 제목/요약/키워드: 블랙 카본

검색결과 371건 처리시간 0.025초

온도 변화에 따른 EBA/카본블랙 복합체의 점탄성 특성에 관한 연구 (Study on the viscoelasticity properties of EBA/Carbon Black composites by temperature changes)

  • 양종석;이경용;최용성;남종철;박동하;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.136-137
    • /
    • 2005
  • To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EBA/carbon black composite showed by changing the content of carbon black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1 [Hz]. The modulus of specimens was increased according to an increment of carbon black content And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of carbon black content.

  • PDF

나노카본블랙과 제지 슬러지를 이용한 전도성 복합보드의 제조에 대한 연구 (Manufacture of Conductive Complex Board Using Nano-Carbon Black and Paper Sludge)

  • 김용렬;손민일
    • 한국응용과학기술학회지
    • /
    • 제25권3호
    • /
    • pp.363-369
    • /
    • 2008
  • In the present work, the choice of the nano carbon black and optimum mixed ratio and effectiveness of the mixed carbon black to get a raw data for a manufacturing method of conductive complex board. Optimum mixed ratio of paper sludge & water was 1 : 2.5 for reformations. HB-41-Y was cheaper than Super-P with the single carbon black. Also electric conductivity of HB-41-Y($6.406{\times}10^{-2}\;{\Omega}cm^{-1}$) was about 6.5 times higher than Super-P($9.741{\times}10^{-3}\;{\Omega}cm^{-1}$) at 20 wt% carbon black. This time optimum mixture ratio of the paper sludge and the carbon black to be about 15 wt%, optimum mixed ratio HB-41Y and Graphite about 3:1 and its electric conductivity was $5.824{\times}10^{-2}\;{\Omega}cm^{-1}$.

PACDEX 캠페인 자료로 분석한 블랙카본을 포함한 축적모드 에어로솔의 구름응결핵 가능성 (Capability of Accumulation Mode Aerosols Containing Black Carbon as CCN Observed during the PACDEX Campaign)

  • 이시혜;김영성;김상우;윤순창
    • 한국대기환경학회지
    • /
    • 제26권4호
    • /
    • pp.380-391
    • /
    • 2010
  • Airborne in-situ measurements of aerosol/cloud number concentrations were analyzed to investigate the effects of aerosols on warm cloud formation in the Pacific Dust Experiment (PACDEX) during April and May 2007. In the air masses originating from the Asian continent, high concentrations of fine particles including black carbon (BC) were observed when compared to other regions. A strong correlation (r=0.88) between condensation nuclei (CN) having sizes ranging from 0.1 to 1.0 mm ($CN_{0.1-1.0}$) and cloud condensation nuclei (CCN) at 0.4% supersaturation ($CCN_{0.4%}$) suggests that most of the $CN_{0.1-1.0}$ can contribute to cloud formation. The possibility of a cloud droplet formation by BC particles was expected at the high water vapor mixing ratio (WVMR) and the abundance of water-soluble components at the low altitude less than 3 km.

카본블랙이 도핑 된 $MgB_2$ 초전도체의 Ag 첨가의 영향 (Influence of Ag Addition on Superconducting Property of Carbon-black Doped $MgB_2$ Superconductor)

  • 김효진;김현지;김찬중;박해웅
    • Progress in Superconductivity
    • /
    • 제12권1호
    • /
    • pp.1-5
    • /
    • 2010
  • In this work we synthesized both MgB2 and Carbon doped MgB2 superconductor with Ag addition via high energy milling and substituent heat treatment. Heat treatments were performed at $900\;^{\circ}C$ for 30 min in flowing Ar gas. We varied amount of Ag powder. In a range of Ag powder was 0~5wt%. The effect of Ag was correlated with superconducting properties. The results show a slight decrease in critical temperature ($T_c$) and a reduction of critical current density ($J_c$) at high fields for the Ag-doped samples as compared to the un-doped samples. Reduction of $J_c$ may be due to the formation of MgAg compound.

세그먼트화 폴리우레탄을 이용한 고분자 마이크로 액츄에이터의 제작 및 고분자 전극의 상태에 따른 구동성능 (Development and Performance Evaluation of Polymer Micro-actuator using Segmented Polyurethane and Polymer Composite Electrode)

  • 정영대;박한수;조남주;정해도
    • 한국정밀공학회지
    • /
    • 제22권2호
    • /
    • pp.180-187
    • /
    • 2005
  • This paper is focused on the development of the flexible electrode for disc-type polymer actuators using Segmented Polyurethane(SPU). This paper consists of two parts. The one is about the mechanical property such as elastic modulus. these parameters mainly affect behaviors of polymer actuators and the other is about the electro-chemical property such as the surface resistance of the composite electrode affects the strength of electrostatic force, results in the deformation of polymer actuators. The Young's modulus was measured by UTM. As result, by increasing the modulus of a body of polymer actuators, the maximum displacement of polymer actuators are decreased. The surface resistance of the electrode was measured by 4 point probe system. Compared with the conductive silver grease, the displacement of polymer actuators using carbon black(CB) composite electrodes is comparably small but CB composite electrode should be the practical approach for the improvement of the performance of all-solid actuators, compared with another types of electrode materials.

EMC용 반응형 인계 난연 수지 개발 (Study on the Preparation of the Phosphoric Flame retardent for the EMC)

  • 안태광;김한병;유금숙
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2009년도 춘계학술발표논문집
    • /
    • pp.372-375
    • /
    • 2009
  • 반도체 봉지재란 실리콘 칩, 골드와이어, 리드프레임 등의 반도체 소지를 열, 수분, 충격으로부터 보호하기 위해 밀봉하는 재료로서 EMC(Epoxy Moding Compound)가 가장 많이 쓰인다. EMC는 기계적, 전기적 성능향상을 위한 무기재료로 실리카(Silica), 열에 의해 경화되어 3차원 경화구조를 형성하는 에폭시수지, 빠른 경화특성을 부여하기 위한 경화제로서의 페놀수지, 유기재료와 무기재료 사이의 결합력을 높이기 위해 커플링제, 카본블랙, 이형성 확보를 위한 왁스(Wax), 착색제(Colorant), 난연제(Flame Retardant)등의 첨가제로 구성되는 복합소재로써 본 연구에서는 에폭시의 유형에 따른 용융 실리카를 주충진재로 하여 각각의 봉지재의 첨가제를 기준으로 할 때 다양한 형태의 친환경 비할로겐계 반응형 난연제를 합성하는 기술을 개발하고 비 할로겐계 및 Sb 계 첨가형 난연제의 혼용 배합을 통해 친환경 EMC용 난연제의 제조기술을 개발하였다. 이들 EMC의 요구특성은 요구특성은 외부환경으로부터 칩 보호, 칩을 전기적으로 절연특성 유지, 칩의 작동시 발생되는 열의 효과적인 방출 특성 유지, 실장(Board Mounting)의 간편성 특성을 확보해야 하는 특성을 지니고 있어 이들 요구특성에 적합한 특성조사가 함께 이루어졌다.

  • PDF

EVA/카본블랙 복합체의 유전특성에 관한 연구 (A Study on the Dielectric Properties of EVA/Carbon Black Composites)

  • 이경용;양종석;이관우;최용성;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
    • /
    • pp.1893-1895
    • /
    • 2005
  • To measure electrical properties of semiconducting materials in power cable, we have investigated dielectric properties of EVA showed by changing the content of carbon black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ringing between $70[^{\circ}C]$ and $100[^{\circ}C]$. Then that was produced as sheets after pressing for 20 minutes at $180[^{\circ}C]$ with a pressure of 200[kg/cm]. The contents of conductive carbon black were 20, 30 and 40(wt%), respectively The dielectric properties of specimens were measured by dielectric thermal analyzer (CONCEPT 40, NOVOCONTROL). Measuring frequencies were 10, 60, 100, 1000, 10000, 100000, 1000000(Hz) and measuring temperatures were -40, -20, 20, $90[^{\circ}C]$. From above experimental result, permittivity was increased, while $tan{\delta}$ was decreased according to an increment of the content of carbon black.

  • PDF

SEM과 AFM을 사용한 반도전 재료 내 카본블랙의 형태 및 분산성 측정 (Formation and Dispersion Measurement in Semiconducting Materials Using the SEM and AFM)

  • 이경용;양종석;남종철;최용성;박동하;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.236-237
    • /
    • 2005
  • To measure surface roughness and smoothness of semiconducting materials in power cable, we have investigated the formation and growth process of carbon black showed by changing the content of carbon black. The specimens were primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then they were produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were the variable, and their contents were 20, 30 and 40[wt%], respectively. The surface roughness and smoothness of specimens were measured by SEM and AFM. From SEM experimental result, carbon black in specimens formed matrix as a particles. Also we showed growth process of carbon black according to an increment of the content of carbon black. From AFM experimental result, surface roughness of specimens decreased according to an increment of the content of carbon black.

  • PDF

EEA/탄소나노튜브와 카본블랙 복합체의 PTC/NTC특성 (PTC/NTC Properties of EEA/Carbon nanotube and Carbon Black Composites)

  • 양종석;이경용;최성헌;이재형;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.236-237
    • /
    • 2006
  • We have investigated volume resistivity showed by changing the content of Carbon nanotube and carbon black which is the component parts of semiconducting shield in underground power transmission cable. Specimens were made of sheet form with the six of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the preheated oven of both $23{\pm}1[^{\circ}C]$ and $90{\pm}1[^{\circ}C]$. The volume resistivity decreased by adding Carbon nanotube and carbon black. Also the volume resistivity had different properties because of PTC/NTC tendencies at between $23[^{\circ}C]$ and $90[^{\circ}C]$. We experimented with electric properties of semiconducting components with fewer Carbon nanotube than carbon black.

  • PDF

SBR 가황물의 회복 거동에 미치는 스티렌 함량의 영향 (Influence of Styrene Contents on Retraction Behaviors of SBR Vulcanizates)

  • 최성신;우창수;장동호
    • Elastomers and Composites
    • /
    • 제40권4호
    • /
    • pp.237-241
    • /
    • 2005
  • 스티렌 함량이 SBR 가황물의 회복 거동에 미치는 영향에 대해 연구하였다. 스티렌 함량이 15와 21 wt%인 SBR을 사용하였다. 스티렌 함량이 적은 가황물이 스티렌 함량이 많은 가황물에 비해 더 낮은 온도에서 회복하기 시작하였으며, 스티렌 함량이 적은 가황물의 회복 속도가 스티렌 함량이 많은 가황물보다 느렸다. 두 가황물 간의 회복 차이는 카본블랙으로 보강된 가황물이 실리카로 보강된 것보다 컸다. 실험 결과는 유리전이온도와 모듈러스로 설명하였다.