• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.129-137
• /
• 2007

In this study, the elastic out-of-plane buckling load and the effective length factor of X-bracing systems were studied. Points of the intersection of diagonals were modeled as a rigid connection or a pinned connection depending on the connection method of diagonals. The boundary condition of the intersection influences the buckling load of X-bracing systems. For each boundary condition of the intersection, effective out-of-plane length factors of X-bracing systems were derived as a function of the length ratio of tension and compression diagonals $L_P$/$L_T$, the applied force ratio of tension and compression diagonals T/P, and the Euler buckling load ratio of tension and compression diagonals $P_{ET}$/$P_{EP}$. The proposed effective out-of-plane length factors of X-bracing systems were compared with the results of previous researchers and those of the finite element analysis and their properties were verified. Finally, the effects of the boundary condition of the intersection on the out-of-plane buckling load of X-bracing systems were investigated.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.65-72
• /
• 2002

This study estimates steel house shear wall's seismic performance depending on trend of seismic design. As a result at cyclic-test, the capability of energy dissipation about X1SPCH during this test is good enough. The capability of energy dissipation of X3SPCH and X4SPCH was better than that of X1SPCH. The X2SPCH which is similar to real X-braced shear wall has better seismic performance than shear wall braced with structural sheathing materials on pseudo-dynamic test.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.667-674
• /
• 2013

Improving the earthquake resistance of buildings through seismic retrofitting using steel braces can result in brittle failure at the connection between the brace and the building, as well as buckling failure of the braces. This paper proposes a new seismic retrofit methodology combined with glass fiber sheet (GFS) and non-compression X-brace system using carbon fiber (CFXB) for reinforced concrete buildings damaged in earthquakes. The GFS is used to improve the ductility of columns damaged in earthquake. The CFXB consists of carbon fiber bracing and anchors, to replace the conventional steel bracing and bolt connection. This paper reports the seismic resistance of a reinforced concrete frame strengthened using the GFS-CFXB system. Cyclic loading tests were carried out, and the hysteresis of the lateral load-drift relations as well as ductility capacities were investigated. Carbon fiber is less rigid than the conventional materials used for seismic retrofitting, resulting in some significant advantages: the strength of the structure increased markedly with the use of CF X-bracing, and no buckling failure of the bracing was observed.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.69-75
• /
• 2012

The purpose of this paper is to study comparative analysis of cable dome structures by reinforcement effect with bracing and fabric. Tensegrity systems are stable structures which are reticulated spatial structures composed of compressive straight members, struts, and cables. Tensegrity structures need to be introduced to the initial stress for the self-equilibrated system to have a stable state. In this paper, the effect of reinforcement resisting the in-plan twisting is investigated for the Geiger-type and Zetlin-type models reinforced by bracing and fabric. The effect of initial imperfection is also studied because the structural instabilitity phenomenon of shell-like structures is very sensitive according to the initial condition. We study a more exact analysis concerning the structural instability of tensegrity structures using nonlinear analysis program. Then, two types of tensegrity models will be analysed and compared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.236-241
• /
• 2019

Lumbar stabilization exercise is a popular exercise method in recent clinicians, as it strengthens muscles around the spine and abdominal muscles, but there is a lack of research on the effects of pulmonary function and respiratory pressure. So, this study examined whether abdominal bracing exercise, a typical lumbar stabilization exercise, was effective in pulmonary function and respiratory pressure. In this study, a total of 20's 40 subjects were recruited and randomly divided into an abdominal bracing exercise group(n=20) and control group(n=20). Abdominal exercise group underwent 25 minutes of exercise. Pulmonary function and respiratory pressure values were measured to analyze respiratory function. As a results of the experimental group, there were significant improvements in FVC, FEV1, PEF and MEP(p<.05) and there was a significant difference in the comparison between groups, except the MIP. These results suggest that abdominal bracing exercise can be presented as effective exercises to improve respiratory function.

• Advanced Industrial SCIence
• /
• v.2 no.2
• /
• pp.16-24
• /
• 2023

Purpose: This study was conducted to find out the immediate effect on dynamic balance through Abdominal hollowing exercise and Abdominal bracing exercise. Method: 90 healthy male and female students in their 20s were surveyed and measured using Y-balance test and Functional reach test. Result: In the dynamic balance Test between groups, there was a statistically significant difference between the group that performed Abdominal hollowing exercise and the control group. Conclusion: Although both representative spinal stabilization exercises Abdominal hollowing exercise and Abdominal bracing exercise are meaningful in increasing dynamic equilibrium, it is difficult to suggest that any method is more effective in terms of immediate effects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.68-76
• /
• 2007

In the present study, tests for U-type steel box girder are performed to observe the effects of W-type and X-type of top lateral bracings on the bending behavior of the U-type steel box girder system. Another objective of the present study is to investigate the adequacy of the currently available design formula. For the structural tests, the test specimen with two third scale of the system constructed in the field was used. In this test, several different spacings are used for the top lateral bracings. The stresses measured from the bending tests are compared with those by the formula proposed by Helwig. An adequate type and the required number of panel for diagonal bracing was obtained.

• Computational Structural Engineering
• /
• v.2 no.3
• /
• pp.69-75
• /
• 1989

The primary purpose of using bracings is to improve the lateral rigidity of main structural system, i.e., columns and beams, by reinforciing them with much smaller members. In conventional design methods brackings are considered as tension-only members, since difficulties arise in the analysis when the P-.DELTA. effects and post-buckling behaviour of the bracing members are taken into account. This is particulary true fox X-bracings. Recently, however, both analytical and experimental studies have been conducted to investigate the more precise and real behaviour of bracing members, especially for the nonlinear and plastic behaviour under cyclic loads. In this study, an analytical model is proposed to investigate the nonlinear behavior of steel bracing members subjected to cyclic loads. Results of the analysis were compared with previous experimental results, and good agreements were obtained between these results.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.69.1-69.1
• /
• 2009

• Journal of Korean Society of Steel Construction
• /
• v.12 no.3 s.46
• /
• pp.317-328
• /
• 2000

The objective of the research is to develop an algorithm for the optimum design of two-dimensional braced steel frames using an advanced analysis, which considers both material and geometric nonlinearties. Since both nonlinearties are considered in analysis process, Optimum design algorithm which does not require to calculate K-factor is presented. A multi-level discrete optimization technique with two parameters that uses the information of structural system and separate member has been developed. The structural analysis is performed by the relined plastic-hinge method which is based on zero-length plastic hinge theory. Optimization problem are formulated by AISC-LRFD code. The feasibility, validity and efficiency of the developed algorithm is demonstrated by the results of the braced steel frame.