• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.51-63
• /
• 2011

This study suggests that prior to construction of the 2nd Changwon tunnel and implementation of the demanded free of charge on Changwon tunnel, it is recommended to improve the traffic facilities and management of the traffic condition in order to create an efficient road that will keep traffic flow to a minimum and maintain the facilities proper working order. It has been generally accepted that the 2nd Changwon tunnel is necessary to construct and open as soon as possible. This is due to the service level of current traffic volume in the Changwon tunnel pay toll road which have been so congested that the fees have increased causing a public complaint to be filed, demanding a early free of charge be implemented for the Changwon tunnel. Furthermore, the objective and impartial analysis of the traffic situation based on a simulation of the alternative and traffic congestion fees has been provided to make the early free of charge on toll road as soon as possible. Finally, careful attention should be paid to seek to make the early free of charge on toll road in order to minimize the damages both specified and unspecified that may arise the prompt settlement of construction repayments and security of minimum management fees should be given priority over other alternatives.

• Journal of Environmental Policy
• /
• v.10 no.1
• /
• pp.27-47
• /
• 2011

Used as foundation resources for environment improvement and preservation of single-housing residential area by practicing classification of biotope with the concept of ecological area rate applied and performing urban thermal environment prediction simulation. Biotope is classified as seven types according to classification of biotope which is carried out with the concept of ecological area rate applied. The classification is listed below in descending order: building biotope(48.16%), impervious pavement biotope(39.75%), greenspace biotope(6.23%), crack permeable pavement biotope(3.26%), whole surface permeable pavement biotope(2.51%), parts permeable pavement biotope(0.04%). As a result of analysing prediction of variation and characteristics of thermal environment of single-housing residential area, land surface temperature per types of biotope are evaluated as listed below in descending temperature order: impervious pavement biotope > building biotope > greenspace biotope > permeable pavement biotope. In case 2 where vegetated roof hypothetically covers 100% of the roof area, temperature is predicted to be $33.58^{\circ}C$ Max, $23.85^{\circ}C$ Min, and $27.74^{\circ}C$ Avg. which is Approximately $5.19^{\circ}C$ lower than a non-vegetated roof. Average outdoor temperature for case 2 is studied to be $0.18^{\circ}C$ lower than case 1.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.156-168
• /
• 2013

Drilling expedition #1 in 2007 and drilling expedition #2 in 2010 were performed for gas hydrate resources evaluation and optimal site selection of pilot test in Ulleung basin, East Sea, Korea. This study presents to build the 3D spatial distribution models using the estimated sedimentary facies, porosity, and gas hydrate saturation derived by well logs and core analysis data from UBGH1-4, UBGH1-9, UBGH1-10, UBGH1-14, UBGH2-2-1, UBGH2-2-2, UBGH2-6, UBGH2-9, UBGH2-10 and UBGH2-11. The objective of 3D spatial distribution modeling is to build a geological representation of the gas hydrate-bearing sediment that honors the heterogeneity in 3D grid scale. The facies modeling is populating sedimentary facies into a geological grid using sequential indicator simulation. The porosity and gas hydrate saturation modeling used sequential Gaussian simulation to populate properties stochastically into grid cells.

• Journal of Korea Game Society
• /
• v.13 no.5
• /
• pp.19-30
• /
• 2013

This Study analyzes dynamic of a puzzle game play by applying entropy law. Entropy is a concept that a quantitative measure of the amount of thermal energy not available to do work in a closed system. And amount of entropy can be measured only if we see the closed system as whole, the field. Puzzle game is also closed system. When player moves an object in game, it change a relationship among objects in play field. In , through an act of position change, player sustains a play field active. In respect of an entropy, this kind of play is considered as pursue of usability of the energy. In , player piles up objects without empty space. In respect of an entropy, this kind of play is considered as pursue of the order. Likewise, puzzle game play can be considered as simulation of a human's pursue of the order in an entropy increasing physical world. And this pursue is a driving force of puzzle game play.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.63-69
• /
• 2006

Islanding phenomenon of utility-connected PV power conditioning systems(PV PCS) can cause a variety of problems and must be prevented. If the real and reactive powers supplied by PV PCS are closely matched to those of load, islanding detection by passive methods becomes difficult. The active frequency drift(AFD) method, called the frequency bias method, enables islanding detection by forcing the frequency of the voltage in the islanding to drift up or down. In this paper, non-detection zone(NDZ) of AFD is analyzed for the islanding detection method of utility-connected PV PCS by simulation tool PSIM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.409-409
• /
• 2010

솔라셀은 차세대 대체 에너지 소스로 최근 큰 각광을 받고 있다. 솔라셀의 제조에 있어 가장 중요한 공정은 마이크로 결정질 및 비결정질 실리콘(uC-Si:H and a-Si:H) 박막을 증착하는 PECVD (Plasma Enhanced CVD)공정이다. 현재까지 이 증착공정을 위한 플라즈마 소스로 CCP(Capacitively Coupled Plasma)가 주로 사용되어 왔다. 그러나, CCP를 플라즈마 소스를 사용한 경우 솔라셀 대량 생산 적용시 다른 방법들에 비해 긴 공정 시간이 해결해야 할 문제점으로 대두되었다. 본 발표에서는 솔라셀의 대량 생산을 위한 마이크로 결정질 실리콘 박막 증착에 있어 현 시점에서 해결되어야 할 문제점에 대해 고찰해 보고자 한다. 현재까지 이러한 문제점들을 해결하기 위해 적용되어 왔던 플라즈마 소스들을 나열하고 이러한 플라즈마 소스에 대한 특성 및 문제점들을 고찰한다. 또한, PECVD 공정상의 문제점을 해결하기 위한 플라즈마 조건을 플라즈마 벌크에서의 전자에너지 분포를 기준으로 제시하고자 한다. 솔라셀용 결정질 실리콘 박막 증착용 플라즈마 소스로 hollow cathode 방전이 가장 유력시되고 있다. 본 연구에서는 CCP 플라즈마에서 hollow cathode 방전시 발생되는 플라즈마 특성에 대한 기초 연구를 제시한다. 기초 연구를 위해 다양한 불활성 가스인 아르콘, 헬륨, 크립톤 가스에 13.56 MHz의 RF 파워를 인가하고 방전되는 플라즈마 밀도 변화를 관찰하였다. 특히, 다양한 hole diameter에서 발생되는 플라즈마 밀도의 변화를 기존 평면 CCP 플라즈마의 밀도에 비교하여 분석함으로써 hole diameter에 따른 효과를 관찰하였다. 이러한 결과는 PIC 시뮬레이션을 통해 얻은 전자에너지 분포함수를 바탕으로 메커니즘을 논의하고자 한다. 마지막으로 솔라셀용 PECVD공정을 위해 고밀도 플라즈마 소스의 필요성뿐 만 아니라 대면적 소스의 구현에 대한 문제점을 고찰하였다. 대면적 공정에서 가장 중요한 핵심 연구 이슈는 공정 균일도를 높이는 것이다. CCP 플라즈마 소스에서 전극의 크기가 대면적화 됨에 따라 발생되는 전자기파 효과에 의한 불균일도에 대해 RF 전자기장 시뮬레이션을 통해 확인하고, 균일도 확보를 위한 방안에 대한 논의하고자 한다.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.125-132
• /
• 2016

This study intended to exploratively depict the influence of interaction between Environmental Uncertainty and Learning Orientation of Korean IT companies on Marketing Capability which was adopted as one of the organizational performance indicator. Statistical Results based on AMOS and SPSS showed that smaller-sized companies under 500 employees are more inclined to desperately and flexibly meet and adapt to their environmental uncertainty, resulting positive performance, that is, marketing capabilities. On the other hand, larger-sized companies over 500 employees showed no significant interaction effect. This result of the study induces the reasoning that the differences in competitive environment and market leadership accrued by organizational size may also incur differences in environmental adaptive mechanism. However, this reasoning can have some limitation in that the types and traits of IT firms are so different. Therefore, this topic suggests the necessity of follow-up researches using enlarged samples in IT industry and comparative studies in other industries.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.415-418
• /
• 2007

가까운 미래에 인간생활에 활용될 지능형 로봇은 인간과 공존하면서도 효과적으로 인간을 도와줄 수 있는 인간친화형 로봇이라 할 수 있다. 이러한 것을 실현하기 위해서 로봇은 미지의 환경 내에서 자신의 위치 및 방향을 인식해야 할 필요가 있다. 더욱이, 이것은 일상생활에서 자연스럽게 이뤄지는 것이 당연하다. 로봇을 제어하는 가장 중요한 문제중의 하나로서 이동로봇의 주행에서의 위치불확실성을 해결함으로서 로봇의 위치를 추정하는 것이 바람직하다 할 수 있다. 본 논문에서는 실내외 공간에서 인간을 포한함 이동물체의 영상정보를 이용하여 이동로봇의 자기위치를 인식하기 위한 방법을 제시하고 있다. 제시한 방법은 로봇자체의 DR센서 정보와 카메라에서 얻은 영상정보로부터 로봇의 위치추정방법을 결합 한 것이다. 그리고 이동물체의 이전 위치정보와 관측 카메라의 모델을 사용하여 이동물체에 대한 영상프레임 좌표와 추정된 로봇위치 간의 관계를 표현할 수 있는 식을 제시하고 있다. 또한 이동하는 인간과 로봇의 위치와 방향을 추정하기 위한 제어방법을 제시하고 이동로봇의 위치를 추정하기위해서 칼만필터 방법을 적용하였다. 그리고 시뮬레이션 및 실험을 통하여 제시한 방법을 검증하였다.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.54-59
• /
• 2003

The characteristics of the parameters for the probability distribution of fatigue crack growth life, using the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length equals the number of cycle curves that are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratios of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Wiubull,, showing a slight dependence on specimen thickness and stress intensity level. The shape parameter, $\alpha$, does not show the dependency of thickness and stress intensity level, but the scale parameter, $\beta$, and location parameter, ${\gamma}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.