• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.188-191
• /
• 2011

현대사회는 기술의 발전으로 인하여 초고층 건축물과 미적 감각을 최대한 활용한 각종 구조별, 형상별 건축물들이 등장하였다. 따라서 이에 사용되는 건축 자재들이 다양화됨에 따라 화재 발생 시 유독가스생성 및 빠른 화재 확산으로 이어질 수 있는 위험성들이 잠재되어 있다. 이러한 화재위험을 최소화하기 위하여 국내에서는 KS F 2257-1:(건축 부재의 내화 시험 방법)이 제정되어 현재까지 구조물의 화재성능을 확인하고 있다. 이에 따라 내화벽 및 방화문이 건축물에 설치되어 건축물의 하중이 크게 증가하고 있다. 따라서 본 연구에서는 기존에 활용되지 않은 소재를 활용하여 목재 방화문을 제작하였으며, 이에 따른 성능을 분석하였다. 그 결과 내화 직물원단은 13분, 글라스울은 17분의 내화성능이 있는 것으로 확인되었으며, 난연 목재로 제작된 심재의 탄화를 보강할 불연 심재를 사용하여 개발 방향을 설정해야 할 것으로 분석되었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.513-519
• /
• 2009

현재 국내의 주요 샌드위치패널 화재안전성능 평가방법에는 Cone calorimeter (연소성능) 및 가스유해성 시험방법이 있지만 샌드위치패널의 경우 불연재질 속 심재의 연소특성을 측정하여 실제 화재에서의 연소거동을 예측하기가 쉽지 않다. 따라서, 본 연구에서는 스티로폼 패널의 화재 안전성 연구를 위해서 ISO 9705 시험(Room Corner Test)을 실시하였다. 실험결과 두 시편 모두 시험이 진행되고 약 12분 정도, 버너의 열량이 100 kW에서 300 kW로 진행되는 시점에서 천정부가 붕괴되어 스티로폼 샌드위치 패널의 구조적인 문제점이 발생되었다. 스티로폼 샌드위치 패널은 내부 심재에 화염이 전파되었을 경우 급속한 화염의 전파 속도로 인해 구조적인 문제점을 발생되는 것을 확인할 수 있었으며, 향후 이와 같은 스티로폼 샌드위치 패널의 실물 화재 시험에 따른 연구 결과들이 화재안전 성능 등급 분류 기준 설정에 사용될 수 있을 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1383-1393
• /
• 2014

Recently, with rapid improvement in computer hardware and theoretical development in the field of computational fluid dynamics, high-order accurate schemes also have been applied in the realm of computational hydraulics. In this study, numerical solutions of 1D shallow water equations are presented with TVD Runge-Kutta discontinuous Galerkin (RKDG) finite element method. The transcritical flows such as dam-break flows due to instant dam failure and transcritical flow with bottom elevation change were studied. As a formulation of approximate Riemann solver, the local Lax-Friedrichs (LLF), Roe, HLL flux schemes were employed and MUSCL slope limiter was used to eliminate unnecessary numerical oscillations. The developed model was applied to 1D dam break and transcritical flow. The results were compared to the exact solutions and experimental data.

• The KIPS Transactions:PartB
• /
• v.10B no.6
• /
• pp.665-672
• /
• 2003

This paper describes a speech synthesis technique by concatenating unit phoneme. At that time, a major problem is that discontinuity is happened from connection part between unit phonemes, especially from connection part between unit phonemes recorded by different persons. To solve the problem, this paper uses clustered diphone, and proposes a spectral smoothing technique, not only using formant trajectory and distribution characteristic of spectrum but also reflecting human's acoustic characteristic. That is, the proposed technique performs unit phoneme clustering using distribution characteristic of spectrum at connection part between unit phonemes and decides a quantity and a scope for the smoothing by considering human's acoustic characteristic at the connection part of unit phonemes, and then performs the spectral smoothing using weights calculated along a time axes at the border of two diphones. The proposed technique removes the discontinuity and minimizes the distortion which can be occurred by spectrum smoothing. For the purpose of the performance evaluation, we test on five hundred diphones which are extracted from twenty sentences recorded by five persons, and show the experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1720-1725
• /
• 2019

In this paper, we consider the efficiency of the scheme for for routing summary algorithms in discontiguous networks. Router than updating and transmitting the entire subnet information in the routing protocol, only the shortened update information is sent and the routing table is shortened to make the router resources more efficient and improve network stability and performance. However, if a discontiguous network is formed in the network design process, a problem arises due to the network contraction function and does not bring about the result of fundamental router efficiency. Using different major networks subnets one major network, causing problems in communication and routing information exchange if the configuration is incorrect. The algorithm proposed in this paper removes only the auto-summary algorithm from the existing algorithm, which increases the complexity and stability of the routing table and reduces the CPU utilization of network equipment from 16.5% to 6.5% Confirmed.

• Annual Conference on Human and Language Technology
• /
• 2004.10d
• /
• pp.145-150
• /
• 2004

본 논문에서는 질의 응답 시스템에서 정답 추출을 위해 사용되는 표층 텍스트 패턴을 장거리 의존 문제에도 적용 가능하도록 확장하는 방법을 제안한다. 기존의 패턴 추출 시스템들의 패턴을 구성하고 있는 단어들간의 연속성과 불연속성에 대한 정보를 나타내도록 패턴 형태를 확장함으로써 장거리 의존 문제를 해결한다. 본 논문에서 제안한 형태의 패턴을 TREC-10의 질의를 이용해서 웹 데이터로 실험하여 정확도와 TREC의 평가 기준인 MRR을 사용해서 기존 시스템들과 성능을 비교했다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.101-104
• /
• 2000

본 논문에서는 곡률 근사화를 이용한 3차원 영상의 표면 분할 알고리즘을 제안한다. 제안한 알고리즘은 기하학적인 접근방법으로 곡률 근사화 이용한 간략화 된 처리 과정의 적용과 곡률의 불연속 정도를 결정하는데 보다 용이한 방법을 제시한다. 이러한 효율적인 에지 검출을 기반으로 여러 가지 3차원 영상의 표면 분할 실험을 통하여 제안한 방법의 성능이 기존의 방법보다 우수함을 확인하였다.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.51-54
• /
• 2016

This paper present a method which resolves an optical discontinuity in bezel of digital signage using light guide film. On a polycarbonate film, a light guide film is bonded to produce refraction, reflection, diffraction of light. Arc shaped light guide film is assembled on the top LED light sources (red and green) to see light propagation through the film. When the two light sources (red and green) are mechanically attached at the end of the film, optical convergence brings new colors which have light wavelength between red and green. This result indicates that the light waveguide method could solve the light discontinuity on bezel of the digital signage system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1198-1206
• /
• 2003

In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.2
• /
• pp.141-147
• /
• 2010

In this paper, we propose a new speech separation algorithm to extract and enhance the target speech signals from mixed speech signals by utilizing both magnitude and phase information. Since the previous statistical modeling algorithms assume that the log power spectrum values of the mixed speech signals are independent in the temporal and frequency domain, discontinuities occur in the resultant separated speech signals. To reduce the discontinuities, we apply a smoothing filter in the time-frequency domain. To further improve speech separation performance, we propose a statistical model based on both magnitude and phase information of speech signals. Experimental results show that the proposed algorithm improve signal-to-interference ratio (SIR) by 1.5 dB compared with the previous magnitude-only algorithms.