• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.419-429
• /
• 2024

Purpose: To enhance the non-combustibility of fire protection piping insulation and improve the heat resistance of smoke extraction duct insulation, I plan to verify the suitability of AES insulation materials for these applications through performance testing. Method: The non-combustibility, heat resistance, and thermal insulation performance of AES insulation materials will be verified through various tests. Result: According to the 'Standards for Flame Retardancy and Fire Spread Prevention of Building Finishing Materials,' the results of non-combustibility and gas toxicity tests confirmed the non-combustible properties. The standard fire resistance tests verified the fire resistance performance. Additionally, the thermal insulation performance was confirmed through building insulation tests. Conclusion: As the performance tests on AES inorganic insulation materials have proven their noncombustibility, fire resistance, and thermal insulation performance, these materials are considered a viable alternative for improving fire spread prevention in buildings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.102-108
• /
• 2017

The phenomenon of technological discontinuity which occurs during technological diffusion and substitution between incumbents and new technology is important to understand the behavior of technology diffusion and substitution of single and multiple technologies. Our research defined the concept of technological discontinuity and developed a model capable of measuring the region of technological discontinuity. Based on a literature review and a model development, we proposed a definition and a model regarding technological discontinuity.The accuracy of the model is verified by applying it on a semiconductor industry case. The technological discontinuity is defined as the region in which both the incumbent and new technology co-exist and the performance of the incumbent technology is better than that of the new technology. In addition, we can model the technological discontinuity using discontinuous time and discontinuous performance. This research will be very useful to understand not only technological discontinuity but also technology diffusion or substitution.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.27-34
• /
• 2018

A Semi-Incombustible Composite Insulation Board (SICIB) that can be applied to building construction and ships was developed. The SICIBs comprised of pine leaf powder, vermiculite. The incombustibility, semi-incombustibility, and U-factor of the developed SICIBs were measured. The incombustibility of the each SICIB was determined by the proportion of combustible flexible binder and pine leaf powder. SICIB satisfied the incombustibility test without a combustible flexible binder and pine leaf powder. In addition, SICIB with 6% of pine leaf ensured its semi-incombustible performance. A combustible flexible binder or pine leaf powder over 6% failed the fire-resistant performance of SICIB. In addition, SICIBs with incombustible/semi-incombustible finishing and a 200 mm insulating layer (glass wool and sprayed poly urethane foam) met the U-factor of an external wall for buildings described in the Korean building code.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.521-528
• /
• 2021

The high-density fiber composite manufacturing method by the extrusion molding method has the characteristic that continuous production is possible, and the product is molded through a mold forming a specific cross-section. OPC is used as a defect material, an appropriate amount of SiO₂ is supplied for CaO reaction activity, and high density and high strength are expressed through steam and autoclave curing. However, due to the use of organic reinforcing fibers, the flame duration exceeds the regulations during the non-combustible performance test, making it difficult to secure performance. In this study, the product was produced by mixing alkali-resistant organic fiber and fly ash having voids as a binder by replacing the existing polypropylene fiber. appeared to be possible.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.17-25
• /
• 2020

In this study, non-flammable mineral foam board using waste glass that can be produced to standardized specifications were developed and evaluated for the performance. In addition to the physical and mechanical performance, the environmental properties such as insulation, non-combustibility, gas hazard, sound absorption, etc. were tested to verify the use as interior and exterior building materials. Through the structural review, the validity was verified for the application of the office and restaurant building.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.593-599
• /
• 2013

In this paper, the GPS cycle-slip detection for carrier-phase based positioning of land vehicle is presented. For the carrier phase based positioning, cycle-slip detection is necessary to get the reliability of positioning result. There exists many cycle-slip detection algorithms, but we detect the cycle-slip by using the monitoring value which is defined as residual between the carrier phase measurement and estimated value from low-cost inertial sensor. To achieve goal of paper, low-cost cycle-slip detection system, permissible specification region of inertial sensor is derived. By using the result of permissible region, appropriate inertial sensor of cycle-slip detection can be decided, proper cost and proper specification. To verify the result of this paper, we conduct the rate table test. As a result, required cycle-slip detection performance is satisfied conservatively.

• Tunnel and Underground Space
• /
• v.31 no.5
• /
• pp.309-332
• /
• 2021

Natural barrier systems surrounding the geological repository for the high-level radioactive waste should guarantee the hydraulic performance for preventing or delaying the leakage of radionuclide. In the case of the behavior of a crystalline rock, the hydraulic performance tends to be decided by the existence of discontinuities, so the coupled hydro-mechanical(HM) processes on the discontinuities should be characterized. The discontinuum modelling can describe the complicated behavior of discontinuities including creation, propagation, deformation and slip, so it is appropriate to model the behavior of a crystalline rock. This paper investigated the coupled HM processes in discontinuum modelling such as UDEC, 3DEC, PFC, DDA, FRACOD and TOUGH-UDEC. Block-based discontinuum methods tend to describe the HM processes based on the fluid flow through the discontinuities, and some methods are combined with another numerical tool specialized in hydraulic analysis. Particle-based discontinuum modelling describes the overall HM processes based on the fluid flow among the particles. The discontinuum methods that are currently available have limitations: exclusive simulations for two-dimension, low hydraulic simulation efficiency, fracture-dominated fluid flow and simplified hydraulic analysis, so it could be improper to the modelling the geological repository. Based on the concepts of various discontinuum modelling compiled in this paper, the advanced numerical tools for describing the accurate coupled HM processes of the deep geological repository should be developed.

• Broadcasting and Media Magazine
• /
• v.2 no.1
• /
• pp.45-56
• /
• 1997

이 논문에서는 여러대의 카메라를 이용하여, 화면내의 모든 화소에 대해 정확한 깊이정보를 추출하는 알고리듬을 제안한다. 제안방법은 스테레오정합에 기반하고 있다. 스트레오정압에 의해 깊이정보를 추정하는데 있어서는 , 오클루전(occlusion)이 추정에 미치는 악영향을 어떻게 극복하는가가매우 중요한 문제이다. 오클루전문제는 2대의 카메라로는 근본적으로 해결이 불가능하다. 따라서 이논문에서는 5대의 카메라를 사용하여, 각 카메라로부터의 정보를 선택적으로 사용함으로써, 이 문제를 상당히 개선한다. 한편, 스테레오 정합법에서는 정합창의 크기가 추정성능에 영향을 미치는데, 큰 창을 이요하면 잡음내성은 우수하나 깊이가 불연속인 곳에서 오차가 발생하고, 작은창을 이용하면 잡음성능은 저하되나 불연속부에서의 창크기에 의한 오차가 줄어드는, 대차관계가 존재한다. 이 논문에서는 처음에 큰 창으로 추정하고 차츰 창의 크기를 줄여나가는 계층적 방법을 제안하여, 잡음내성을 강화하고 불연속부의 오차를 줄이고 있다. 실험경과를 통하여 제안방법의 성능을 제시하고 타당성을 확인한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.423-423
• /
• 2017

수자원 계획 수립이나 관리를 위한 강우-유출 현상 해석에는 장기 유출 모형이 이용된다. 장기 유출 모형은 모형의 보정 과정이 요구되며, 유역별로 특성이 다르기 때문에 유역에 적합하게 매개변수를 보정하여야 한다. 모형의 매개변수를 추정하기 위해서는 주로 연속된 실측 유량자료가 필요하다. 하지만 일부 측정망에서는 일별 유출량 자료가 아닌 불연속적인 유량자료만을 획득할 수 있으며, 이러한 불연속적인 유량자료의 매개변수 보정의 적용에 관한 연구는 다소 미흡하게 진행되어 왔다. 따라서 본 연구에서는 수정 3단 TANK 모형을 대상으로 불연속적인 유량 자료를 이용하여 매개변수 최적화를 수행하고 모의결과를 비교 분석하여 성능을 평가하고자 한다. 유량자료는 국토교통부에서 측정하는 일별 유량자료를 이용하여 2일, 4일, 6일 8일, 10일, 15일 간격의 자료를 생성하여 적용하였으며, 최적화 기법으로는 SCE-UA(Shuffled Complex Evolution method developed at University of Arizona) 기법을 이용하였다. 본 연구의 결과는 수문 측정망의 운영에 있어 효율적 측정 주기 설정과 총량측정망 유량자료와 같은 불연속적 유량자료의 장기유출모형 최적화에 활용될 수 있을 것으로 기대된다.

• Land and Housing Review
• /
• v.10 no.3
• /
• pp.23-32
• /
• 2019

Vacuum Insulation Panel(VIP) has the lowest thermal conductivity among present insulations. It is composed of envelope, core material and getter. Aluminum film is usually used as the envelope of VIP, and it is important component to decide the useful life of VIP. In this research, the thermophysical properties of incombustible fiber glass core VIP were investigated with the possibility of its architectural applications. The results of this research can be summarized as follows: 1) The thermal conductivity of 20mm-thick fiber glass core VIP is resulted as 0.00177W/m·K, which means that 20mm-thick VIP can meet all the reinforced insulation guideline and it can be used in any envelope of any region in Korea. 2) As a result of the test of incombustion and gas toxicity, fiber glass core VIP was suitable for incombustible material. 3) As the test result for the long term thermal conductivity, fiber glass core VIP was found out that it would keep above 10 times insulating performance than polystyrene foam and glass fiber. 4) To meet the thermal transmittance of 0.12W/㎡K, limited-combustible insulation of expanded polystyrene foam and phenolic foam should be used respectively as thick as above 280mm and 170mm, incombustible VIP can meet the same insulation level with 20mm thickness. 5) The price competitiveness of incombustible VIP to meet the thermal transmittance of 0.12W/㎡·K was about 1,500won/㎡ higher than that of phenolic foam.