• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.70-78
• /
• 1991

Both long period of summer drought and unusual high water temperature in 1988 caused the harmfull effect to the aquacultural organisms in south coast of Korea. One of those was the mass mortality of arkshell seedlings in Jinhae Bay. The purpose of this study was to verify the effects of environmental factors on arkshell seedlings by investigating not only water quality and food organisms in culturing grounds, but also meteorological conditions. Water temperature in November was higher at $2.0^{\circ}C$ than mean water temperature and the concentration of total inorganic nitrogen and N/P ratio were $0.38{\mu}g-at/l,$ 0.98, respectively which indicated the exhaustion of nutrients, especially nitrogen in the study area. In analysis of phytoplankton population structure, species diversity index(H) , equitability-index(e), species richness $index(d_1)$ were low, but dominance $index({\delta}_2)$ was high at the value of 98.4 and dominant species was Nitzschia pungens. In conclusion, it seems that mass .mortality of arkshell seedlings in November was resulted from the metabolism disorder with poor food organism under the unstable marine environment.

• Nuclear Engineering and Technology
• /
• v.17 no.4
• /
• pp.290-301
• /
• 1985

600MW(e) CANDU Primary Heat Transport System (PHTS) is composed of the two “figure-of-eight” loops and is designed to operate with the 4% Reactor Outlet Header (ROH) quality at its rated power. This existence of the two compressible regions and the positive flow-qualitly-void feedbacks are the sources of the PHTS flow instability. To ensure the PHTS stability, ROH-ROH interconnect pipes are installed as passive systems. This paper describes the investigation of the PHTS flow instability at its design full power condition. Also studied are the interconnect effect and the inherent system damping effect on the system stability. The time domain stability analyses are accessed by using the ATHER/MOD-I code which is the improved version of the KAERI developed ATHER code. Under the most adverse system modelling, the “figure-of-eight” symmetric loop shows divergent flow oscillations. Under with the interconnect, the PHTS stability is remarkably enhanced so that the system becomes stable. However, even under the conservative pressurizer modelling, the PHTS shows the more convergent flow oscillations. With the interconnect and the pressurizer modelling, its stability is highly credited. Conclusively, the inherent system damping by pressurizer itself can credit the PHTS stability without the interconnect.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.9-19
• /
• 2001

contrasting monsoon between 1993 and 1994 produced an interannual difference in hydrology. Theoretical water residence time (TWRT) in monsoon 1993 averaged 27 d, which was>3 months shorter compared to the TWRT in monsoon 1994. A dominant physical process influencing thermal stratification, water movement, and mixing regime was an interflow current in 1993. During summer 1993, river water plunged to mid-lake (location 27 km) and passed through the 10${\sim}$20m stratum of the reservoir, resulting in an isolation of epilimnetic lake water from advected river water. The interflow disrupted thermal stratification and produced a meta-hypolimnetic warming of >4$^{\circ}C$ downlake, thereby increased a mixing depth (>13 m). In contrast, during monsoon 1994 density currents were not observed and strong thermal stratification occurred in the entire reservoir, resulting in > 2 fold greater thermal resistance (8.2${\times}10^{5}$ erg)compared to 1993 (4.0${\times}10^{5}$ erg). This reservoir was identified as a typical warm monomictic reservoir which showed one mixis during early winter. The timing of overturn, however, differed between the two years as a result of distinct contrast in TWRT and thermal regime; overturn in 1993 occured about one month earlier relative to that in 1994. Hypolimnetic warming was predictable in this system; the variation in discharge accounted (Y = 4.35-0.06X+0.10X$^{2}$, p<0.0001)for 98% of the interannual variation in hypolimnetic temperature. Overall data suggest that thermal stability, the timing of fall overturn, and water residence time in this system are primarily regulated by the intensity of monsoon.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2012

The Baegdusan volcano is one of the most active volcanoes in northeastern Asia, and the 10th century eruption was the most voluminous eruption in the world in recent 2,000 years. During the period from 2002 to 2005, volcanic earthquakes and abnormal surface distortions by suspected subsurface magma intrusion beneath the volcano were observed in the Baegdusan area. Seismic activity has gradually increased with earthquake swarms during 2002-2003 and hundreds of seismic event in a day, especially annual peak of 2,100 in 2003. Then the number of seismic activity has declined since 2006 to the background level in 1999-2001. According to the typical frequency of volcanic earthquakes in the Baegdusan volcano, the frequency distribution of typical volcanic earthquakes between 2002 and 2005 indicates that all the main frequency of the earthquakes basically falls down less than 5 Hz and 5-10 Hz. These events are all the VT-B and LP events caused by the shallow localized fracture and intrusion of magma. The horizontal displacement measurement by GPS during the period from 2000 to 2007 of the Baegdusan stratovolcano area indicates that an inflated process has been centered at the summit caldera since 2002. The displacement between 2002 and 2003 reached at a maximum value of 4 cm. After 2003, the deformation rate of the volcano continued to decrease with unusual variation during the period from 2006 to 2007. After 2003 the vertical displacement uplift rate falls down gradually but still keeps in an uplift trend in northern slope. It is generally believed that when $^3He/^4He(R)$ in a gas sample from a hot spring exceeds $^3He/^4He(R)$ in the atmosphere, it can be concluded that mantle-source. And temperatures of hot springs are rising steadily to $83^{\circ}C$. It is unrest signals at the Baegdusan, which is potentially active. The Baegdusan volcano is now in unrest status, there is eruption threat in the near future. Intensified monitoring and emergency response plan for volcanic risk mitigation are urgent for the volcano.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.40-47
• /
• 2013

The similarity in internal flow of solid and hybrid rocket suggests that hybrid rocket combustion can be susceptible to instability due to vortex sheddings and their interaction. This study focuses on the evolution of interaction of vortex generated in pre-chamber with other types of vortex in the combustor and the change of combustion characteristics. Baseline and other results tested with disks show that there are five different frequency bands appeared in spectral domain. These include a frequency with thermal lag of solid fuel, vortex shedding due to obstacles such as forward, backward facing step and wall vortices near surface. The comparison of frequency behavior in the cases with disk 1 and 3 reveals that vortex shedding generated in pre-chamber can interact with other types of vortex shedding at a certain condition. The frequency of Helmholtz mode is one of candidates resulting to a resonance when it was excited by other types of oscillation even if this mode was not discernable in baseline test. This selective mechanism of resonance may explain the reason why non-linear combustion instability occurs in hybrid rocket combustion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.348-348
• /
• 2012

휴대용 저장매체에서부터 solid state disk와 같은 고속 시스템 저장 매체 까지 플래시 메모리의 활용도가 급속도로 커지고 있다. 이에 플래시 메모리에 대한 연구 또한 활발히 진행 되고 있다. 현재 다결정 실리콘을 전하 주입 층으로 사용하는 기존의 플래시 메모리는 20 nm 급 까지 비례 축소되어 활용되고 있다. 하지만 20 nm 이하 크기의 소자에서는 과도한 누설전류와 구동전압의 불안정, 큰 간섭현상으로 인한 성능저하와 같은 많은 문제점에 봉착해 있다. 이를 해결하기 위해 FinFET, Vertical 3-dimensional memory, MRAM (Magnetoresistive Random Access Memory), PRAM(Phase-change Memory)과 같은 차세대 메모리 소자에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 차세대 메모리 구조로 주목 받고 있는 FinFET 구조를 가진 플래시 메모리에서 fin 의 채널영역의 도핑 농도 변화에 의한 20 nm 이하의 게이트 크기를 가지는 소자의 전기적 특성과 프로그램 특성을 3차원 시뮬레이션을 통해 계산하였다. 본 연구에서는 FinFET 구조를 가진 플래시 메모리의 채널이 형성되는 fin의 윗부분도핑농도의 변화에 의한 전기적 특성과 프로그램 특성을 계산하였다. 본 계산에 사용된 구조는 게이트의 크기, 핀의 두께와 높이는 18, 15 그리고 28 nm이다. 기판은 Boron으로 $1{\times}10^{18}cm^{-3}$ 농도로 도핑 하였으며, 소스와 드레인, 다결정 실리콘 게이트는 $1{\times}10^{20}cm^{-3}$ 농도로 Phosphorus로 도핑 하였다. 채널이 형성되는 fin의 윗부분의 도핑농도를 $1{\times}10^{18}cm^{-3}$ 에서 $1{\times}5^{19}cm^{-3}$ 까지 변화 시키면서 각 농도에 대한 프로그램 특성과 전기적 특성을 계산하였다. 전류-전압 곡선과 전자주입 층에 주입되는 전하의 양을 통해 특성을 확인하였고 각 구조에서의 채널과 전자 주입 층의 전자의 농도, 전기장, 전기적 위치 에너지와 공핍 영역의 분포를 통해 분석하였다. 채널의 도핑농도 변화로 인한 fin 영역의 공핍 영역의 분포 변화로 인해 전기적 특성과 프로그램 특성이 변화함을 확인하였다.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.597-603
• /
• 2012

The cases for selecting contact materials of Ag and AgC for Bias Track Relay are the studies and their safety evaluations are proposed in this paper. The welding at the relative low current has occurred in Ag contacts, but the one has not occurred in AgC contacts although the high currents flow since it has an excellent temperature characteristic. In the repetitive switching experiment, more unstable resistance and transfer phenomena has occurred in contacts as the switching numbers of AgC contacts increase, which results in more consumption of contacts. In the experiments, there exists a trade off relationship between welding and resistance variation. AgC contacts have excellent characteristics in welding, but the caution is required in using them since a lot of repetition switching produces much resistance variation. However, Ag contacts have excellent characteristics in repetitive switching, but weak ones in welding.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.253-260
• /
• 2020

The five-story stone pagoda in Tamni-ri located in Uiseong County in Gyeongsangbuk-do had an unstable upper structure, and the structural deformation of the foundation stone and the stylobate was severe. In order to repair the base of the pagoda, it must be confirmed if there are support stones inside the base. Resistivity survey was performed to study the inner base stone structure during the repair work. The stylobate was exposed soil and broken stones after removing the walls and the cover of the stylobate. Modified pole-dipole array II was used for the resistivity survey, and compared with the typical pole-dipole array method. And in this study, a physical scale-down model experiment was performed to compare and analyze distortions caused by severe topographical undulations such as right-angled lines. The results show that the stylobate of Five-story Stone Pagoda in Tamni-ri Uiseong has base stones inside the reinforced filling soil and are located beneath the pillar of the body and supporting the pagoda.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.149-159
• /
• 2001

The conventional block-based motion prediction suffers, especially in low bit-rate video application, from shortcomings such as blocking artifacts of motion field and unstable motion estimation. To overcome the deficiency, this paper proposes one method of adopting a new motion compensation scheme based on the irregular triangular mesh structure while keeping the current block-based DCT coding structure of H.263 as much as possible. To represent the reconstructed previous frame using minimal number of control points, the proposed method designs content-adaptive irregular triangular meshes, and then, estimate the motion vector of each control point using the affine transformation-based matching. The predicted current frame is obtained by applying the affine transformation to each triangular mesh. Experiment with the several real video sequences shows improvement both in objective and subjective picture quality over the conventional block-based H.263 method.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.1
• /
• pp.19-33
• /
• 2010

The surface film, which is formed on graphite negative electrodes during the initial charging, is a key component in lithium secondary batteries. The battery reactions are strongly affected by the nature of the surface film. It is thus very important to understand the physicochemical properties of the surface film. On the other hand, the surface film formation is a very complicated interfacial phenomenon occurring at the graphite/electrolyte interface. In studies on electrode surfaces in lithium secondary batteries, in-situ experimental techniques are very important because the surface film is highly reactive and unstable in the air. In this respect electrochemical atomic force microscopy (ECAFM) is a useful tool for direct visualizing electrode/solution interfaces at which various electrochemical reactions occur under potential control. In the present review, mechanism of surface film formation and its correlation with electrolyte are summarized on the basis of in-situ ECAFM studies for understanding of the nature of the surface film on graphite negative electrodes.